Skip to the content
4 layers54.6 × 99.3 mmSH wg, the printed circuit board in 3D

Sailor Hat WiFi Gateway hardware design files

Size
54.6 × 99.3 mm
Copper layers
4
Thickness
1.6 mm
Parts
85
Nets
68
Pads
245
Tracks, vias
514, 209
Pours
4
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
30 Jan 2022
Updated
17 Mar 2022

Overview

SH wg is an open-source printed circuit board by hatlabs, from the hatlabs/SH-wg-hardware repository on GitHub. It is a 4-layer board of 54.6 × 99.3 mm with 85 parts on 68 nets, routed with 514 tracks and 209 vias.

It is built around the ESP32-WROOM-32E, SN65HVD231DR-JSM and XL1509-3.3, with the AH1902-Z, B5819W and SMF24CA among its other parts. Its parts include 30 capacitors, 12 resistors, 10 diodes, 9 connectors and 4 ICs. It belongs with the radio and wireless boards and the ESP32 boards of this library.

Main components

11

README

README.md

Sailor Hat WiFi Gateway

This repository contains the Sailor Hat WiFi Gateway (SH-wg) hardware design. SH-wg is a purpose-built NMEA 2000 WiFi gateway device.

Parts

85
QtyValueFootprintReferences
16100nFCapacitor_SMD:C_0402_1005MetricC201, C401, C402, C403, C404, C405, C406, C407, C408, C409, C410, C701, C704, C706, C707, C801
710uF/50VCapacitor_SMD:C_1206_3216MetricC601, C605, C608, C609, C610, C611, C612
410kResistor_SMD:R_0402_1005MetricR201, R202, R301, R805
42kResistor_SMD:R_0402_1005MetricR302, R303, R801, R806
21.5kResistor_SMD:R_0402_1005MetricR803, R804
2B5819WDiode_SMD:D_SOD-123FD602, D603
2GREEN LEDLED_SMD:LED_0603_1608MetricD803, D804
2SMF24CADiode_SMD:D_SOD-123FD201, D202
11.0kResistor_SMD:R_0402_1005MetricR802
1100nF/50VCapacitor_SMD:C_0402_1005MetricC606
11uFCapacitor_SMD:C_0402_1005MetricC301
11uF/50VCapacitor_SMD:C_0805_2012MetricC603
122uF/6.3VCapacitor_SMD:C_0603_1608MetricC302
12N7002Package_TO_SOT_SMD:SOT-23Q801
14.7RResistor_SMD:R_0603_1608MetricR601
14.7nF/50VCapacitor_SMD:C_0402_1005MetricC602
14.7uF/50VCapacitor_SMD:C_1206_3216MetricC604
147uF/6.3VCapacitor_SMD:C_1206_3216MetricC607
1AH1902Package_TO_SOT_SMD:SOT-553U801
1Analog IOConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ303
1Aux PCB Conn FemaleConnector_PinSocket_2.54mm:PinSocket_2x06_P2.54mm_VerticalJ102
1Aux PCB Conn MaleConnector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_VerticalJ101
1BLUE LEDLED_SMD:LED_0603_1608MetricD802
1CBC3225T100KRInductor_SMD:L_1210_3225MetricL601
1Conn_01x04Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ501
1Conn_01x05SH-ESP32:M12-5A_Male_Horizontal_PCB_HysikJ201
1Conn_02x03_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ701
1Digital IOConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ302
1ESP32-WROOM-32ESH-wg:ESP32-WROOM-32-HandSolderU301
1GZ2012D601TFInductor_SMD:L_0805_2012MetricFB601
1Hat Labs logoSH-wg:Hat_Labs_20mmG402
1Hat Labs logo largeSH-wg:Hat_Labs_25.4mmG403
1Hat Labs pictogramSH-wg:HL_pictogram_6.3mmG401
1JTAGConnector_IDC:IDC-Header_2x05_P2.54mm_VerticalJ301
1MountingHoleSH-wg:MountingHole_3.2mm_M3_no_copperH404
1OSHW logoSymbol:OSHW-Logo2_9.8x8mm_SilkScreenG405
1PowerConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ401
1RED LEDLED_SMD:LED_0603_1608MetricD805
1SMBJ33CADiode_SMD:D_SMBD601
1SMMS0650-470MSH-wg:SMMS0650-1R0ML602
1SN65HVD231DRPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU201
1WEEE logoSymbol:WEEE-Logo_5.6x8mm_SilkScreenG404
1XL1509-3.3Package_SO:SOP-8_3.9x4.9mm_P1.27mmU601
1YELLOW LEDLED_SMD:LED_0603_1608MetricD801
1mSMD050-60VFuse:Fuse_1812_4532MetricF601

The 76 most common of 85 parts.

Similar boards

  • 4 layers89 × 58 mmSH ESP32, the printed circuit board in 3D

    SH ESP32

    kitspace-test-repos/kicad6-file-collection

    308 partsMIT
  • 4 layers89 × 58 mmHALMET, the printed circuit board in 3D

    HALMET

    hatlabs/HALMET-hardware

    Hat Labs Marine Engine & Tank interface hardware design files

    227 parts8CC-BY-4.0
  • 4 layers89 × 58 mmSH ESP32, the printed circuit board in 3D

    SH ESP32

    hatlabs/SH-ESP32-hardware

    Sailor Hat for ESP32 hardware

    321 parts49
  • 2 layers127 × 71 mmRgb input, the printed circuit board in 3D

    Rgb input

    hoeken/yarrboard-hardware

    Hardware for the Yarrboard open hardware project

    118 parts4GPL-3.0
  • 4 layers90.8 × 58.8 mmHALSER, the printed circuit board in 3D

    HALSER

    hatlabs/HALSER-hardware

    Hat Labs Serial Interface Device hardware design files

    199 partsCC-BY-4.0
  • 4 layers70 × 60 mmCAN Logger V2.0, the printed circuit board in 3D

    CAN Logger V2.0

    deep-th/CAN_Logger

    This is a compact and reliable CAN logger board built for automotive and industrial applications. It features the ESP32-S3 microcontroller and MCP25625 CAN controller with integrated transceiver, supporting two…

    138 parts3
  • 2 layers131.1 × 149.9 mmHEDC B001, the printed circuit board in 3D

    HEDC B001

    Thaddeus-Maximus/dotclock

    An ESP32-based alarm clock with a dot matrix LED display, rotary encoder interface, MP3 audio playback, and a web configuration UI.

    70 parts

Questions

How big is the SH wg PCB?

It measures 54.6 × 99.3 mm and has 4 copper layers, 1.6 mm thick.

What parts does the SH wg use?

85 parts, built around the ESP32-WROOM-32E, SN65HVD231DR-JSM, XL1509-3.3 and AH1902-Z. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SH wg KiCad files?

From the hatlabs/SH-wg-hardware repository on GitHub, at the commit this page was made from: the board is SH-wg.kicad_pcb and its schematic ESP32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the SH wg design in my own project?

Its repository states no licence, so its author keeps all rights: ask hatlabs before reusing the design.