

STM32F405RGT6-Breakout
Following along with Phil's Lab: https://www.youtube.com/watch?v=t5phi3nT8OU
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 62
- Nets
- 76
- Pads
- 276
- Tracks, vias
- 363, 108
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 13 Nov 2021
- Updated
- 23 Nov 2021
Overview
STM32F405RGT6-Breakout is an open-source printed circuit board by MURPHYENGINEERING, from the MURPHYENGINEERING/STM32F405RGT6-Breakout repository on GitHub. It is a 4-layer board with 62 parts on 76 nets, routed with 363 tracks and 108 vias.
It is built around the STM32F405RGT6, W25Q128JVSIQ and AMS1117-3.3, with the USBLC6-2SC6, TS-1187A-B-A-B and SI2301CDS among its other parts. Its parts include 20 capacitors, 13 resistors, 11 connectors, 4 ICs and 3 diodes. It belongs with the interfaces and adapters boards and the STM32 boards of this library.
Main components
7STM32F405RGT6
LQFP-64(10x10)-40℃~+85℃ 1.8V~3.6V 12bit 12bit 168MHz 192KB 1MB 32 Bit 51 ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)TS-1187A-B-A-B
SMD-4P,5.1x5.1mm-30℃~+85℃ 1.5mm 1.6N 100,000 cycles 12V 5.1mm 5.1mm 50mA Gold No Round Button SPST Surface Mount,Vertical Without Bracket SMD-4P,5.1x5.1mm Tactile Switches ROHSXKB ConnectionTactile SwitchesSI2301CDS
SOT-23-55℃~+150℃ 1 P-Channel 142mΩ@2.5V 20V 3A 400mV 400mW 500pF 6.6nC@4.5V 80pF SOT-23 MOSFETs ROHSFUXINSEMIMOSFETsZMM5V6
LL-34-55℃~+175℃ 1 Independent 100nA 25Ω 450Ω 5.2V~6V 5.6V 500mW LL-34 Zener Diodes ROHSSTMicroelectronicsZener Diodes
README
README.mdPhil's STM32F4 Breakout board
Following along with this excellent video from Phil's Lab
Also check out his very cool fixed wing and multirotor projects.
Parts
62| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100u | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7, C8 |
| 4 | 2.2k | Resistor_SMD:R_0402_1005Metric | R3, R4, R5, R6 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_4.3mm_M4_Pad_Via | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R8, R13, R17 |
| 3 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical_SMD_Pin1Left | J8, J9, J10 |
| 2 | 100n | Capacitor_SMD:C_0402_1005Metric | C14, C18 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R9 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C16, C17 |
| 2 | 12p | Capacitor_SMD:C_0402_1005Metric | C12, C13 |
| 2 | 2.2u | Capacitor_SMD:C_0603_1608Metric | C10, C11 |
| 2 | Red | Diode_SMD:D_0603_1608Metric | D2, D3 |
| 2 | TS-1187A-B-A-B | TS-1187A-B-A-B:SW_TS-1187A-B-A-B | SW1, SW2 |
| 1 | 100 @ 100 MHz | Inductor_SMD:L_0805_2012Metric | FB2 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 100 @ 100 MHz | Inductor_SMD:L_0805_2012Metric | FB1 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C19 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric | C15 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | HSE1 |
| 1 | 220 | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 22k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric | C20 |
| 1 | 5.1k | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 500mA | Fuse:Fuse_0603_1608Metric | F1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Conn_01x03 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical_SMD_Pin1Left | J11 |
| 1 | I2C1 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical_SMD_Pin1Left | J6 |
| 1 | I2C2 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical_SMD_Pin1Left | J7 |
| 1 | PWR OUT | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical_SMD_Pin1Left | J2 |
| 1 | SPI1 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical_SMD_Pin1Left | J5 |
| 1 | STM32F405RGT6 | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | SWD/JTAG | Connector_PinSocket_1.27mm:PinSocket_2x05_P1.27mm_Vertical_SMD | J3 |
| 1 | Si2301CDS | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | USART6 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical_SMD_Pin1Left | J4 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U4 |
| 1 | ZMM5V6 | Diode_SMD:D_MiniMELF | D1 |
Similar boards
- 2 layers175 × 60 mm

- 4 layers65 × 45 mm

03-final E
ramtuc/rp2040-logic-analyzer
RP2040 + TXU0104 16ch logic analyzer board for PulseView (sigrok-pico), 4-layer, JLCPCB PCBA
82 partsCERN-OHL-P-2.0 - 2 layers121 × 75.5 mm

Jlctest
cjheath/jlcbasic
JLC Basic parts library for Kicad fetched and converted from EasyEDA
46 parts5 - 4 layers74.5 × 69.2 mm

- 4 layers100 × 100 mm

- 2 layers99.1 × 59.7 mm

LaserHarp3 - Rev3.1
amonbenson/laserharp
Setup a virtual environment and install the dependencies:
134 parts1 - 4 layers36 × 36 mm

Rl fc f405.routed
GabuGravin41/rlpcb
RL PCB sits beside KiCad and works like a senior hardware engineer looking over your shoulder. You describe what you want to build; it helps you choose real parts from your KiCad libraries, works out the values, places…
65 parts2 - 4 layers40 × 40 mm

AeroHawk FC
sbbxiii/The-Eagle
The Eagle: Custom STM32F405 4-Layer Autonomous Avionics Flight Controller PCB
76 parts1MIT
Questions
What parts does the STM32F405RGT6-Breakout use?
62 parts, built around the STM32F405RGT6, W25Q128JVSIQ, AMS1117-3.3 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the STM32F405RGT6-Breakout KiCad files?
From the MURPHYENGINEERING/STM32F405RGT6-Breakout repository on GitHub, at the commit this page was made from: the board is kicad/STM32F405RGT6-Breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the STM32F405RGT6-Breakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask MURPHYENGINEERING before reusing the design.