2 layers88.9 × 106 mm
2 layers164.5 × 106 mm
Elements v02
mort13/clandestine_circuitry12Collection of diy synth projects
- Size
- 164.5 × 106 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 197
- Nets
- 132
- Pads
- 734
- Tracks, vias
- 1,770, 322
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 30 May 2024
- Updated
- 6 May 2025
Overview
Elements v02 is an open-source printed circuit board by mort13, from the mort13/clandestine_circuitry repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 164.5 × 106 mm with 197 parts on 132 nets, routed with 1,770 tracks and 322 vias.
It is built around the STM32F405RGT6, MCP6004-E/P and LME49720NA, with the MCP6002-I/P, LM1117-3.3 and 1N5819HW among its other parts. Its parts include 89 resistors, 57 capacitors, 18 connectors, 14 ICs and 4 diodes. It belongs with the STM32 boards of this library.
Main components
11
STM32F405RGT6
LQFP-64(10x10)-40℃~+85℃ 1.8V~3.6V 12bit 12bit 168MHz 192KB 1MB 32 Bit 51 ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
MCP6004-E/P
PDIP-14-40℃~+125℃ 1.8V~6V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-14 Operational Amplifier ROHSMicrochip TechnologyOperational Amplifier
LME49720NA
PDIP-8-17V~-2.5V、2.5V~17V -40℃~+85℃ 0.00003% 10mA 120dB 2-Channel PDIP-8 Operational Amplifier ROHSTexas InstrumentsAudio AmplifiersMCP6002-I/P
PDIP-8-40℃~+85℃ 1.8V~6V 100uA 1MHz 1pA 1pA 2 23mA 28nV/√Hz@1kHz 2uV/℃ 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-8 Operational Amplifier ROHSMicrochip TechnologyOperational Amplifier
LM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorised
1N5819HW
SOD-123-65℃~+150℃ 1 Independent 1A 1mA@40V 25A 40V 450mV@1A SOD-123 Schottky Diodes ROHSDiodes IncorporatedSchottky DiodesEVQQ2
UncategorisedPanasonic
LP4OA1PBCTR
插件-20℃~+70℃ 100mA DPDT Round Button Through Hole Transparent 插件 Pushbutton Switches ROHSE-SwitchPushbutton Switches
MMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
SSL-LX5093PC
插件LED Indication - DiscreteLumexSSL-LX5093TC
插件LED Indication - DiscreteLumex
README
README.mdclandestine_circuitry
Collection of diy synth projects Be aware, some schematics and boardfiles may contain errors and bugs. Especially the ones designed by me.
Parts
197| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 100n | elements_v02:C0603 | C2, C4, C13, C16, C18, C21, C22, C23, C29, C32, C33, C34, C37, C38, C39, C44 +8 |
| 18 | PJ301_THONKICONN6 | elements_v02:WQP_PJ_301M6 | J1, J2, J3, J4, J5, J6, J7, J10, J11, J12, J13, J14, J15, J16, J17, J18 +2 |
| 17 | 10kB | elements_v02:ALPS_POT_VERTICAL_PS | R3, R4, R5, R6, R7, R8, R23, R24, R25, R26, R61, R62, R63, R64, R65, R66 +1 |
| 14 | 100k | elements_v02:R0603 | R13, R16, R19, R22, R30, R33, R36, R39, R40, R43, R54, R57, R67, R71 |
| 13 | 3.3n | elements_v02:C0603 | C14, C15, C19, C20, C24, C25, C26, C27, C28, C30, C41, C42, C50 |
| 11 | 120k | elements_v02:R0603 | R14, R15, R20, R21, R32, R38, R41, R42, R55, R56, R70 |
| 11 | 20k | elements_v02:R0603 | R11, R12, R17, R18, R28, R29, R35, R46, R48, R49, R73 |
| 10 | 10kB | elements_v02:ALPS_POT_VERTICAL | R76, R77, R78, R79, R80, R81, R82, R83, R84, R85 |
| 5 | 10u | Capacitor_SMD:CP_Elec_6.3x5.4 | C40, C52, C53, C55, C56 |
| 5 | 47k | elements_v02:R0603 | R27, R51, R59, R69, R72 |
| 4 | 1.0k | elements_v02:R0603 | R1, R2, R88, R89 |
| 4 | 18p | elements_v02:C0603 | C11, C12, C43, C49 |
| 4 | 2.2k | elements_v02:R0603 | R44, R47, R52, R53 |
| 4 | 22u | Capacitor_SMD:CP_Elec_6.3x5.9 | C1, C3, C9, C10 |
| 4 | 4051PW | elements_v02:TSSOP16 | IC3, IC5, IC8, IC11 |
| 4 | 6.8k | elements_v02:R0603 | R58, R68, R74, R87 |
| 4 | FIDUCIAL1X2 | elements_v02:FIDUCIAL-1X2 | F1, F2, F3, F4 |
| 3 | 10k | elements_v02:R0603 | R45, R50, R60 |
| 3 | 1u | elements_v02:C0603 | C17, C36, C48 |
| 3 | MCP6004 | elements_v02:SO14 | IC6, IC7, IC13 |
| 2 | 1N5819HW | elements_v02:SOD123 | D1, D2 |
| 2 | 2.2u | elements_v02:C0805 | C31, C35 |
| 2 | 220p | elements_v02:C0603 | C54, C57 |
| 2 | 36k | elements_v02:R0603 | R75, R86 |
| 2 | EVQQ2 | elements_v02:EVQ-Q2 | SW2, SW3 |
| 2 | LM1117-3.3 | elements_v02:SOT223 | IC2, IC4 |
| 2 | WE-CBF_0603 | elements_v02:0603 | L1, L2 |
| 1 | 180k | elements_v02:R0603 | R37 |
| 1 | 200k | elements_v02:R0603 | R31 |
| 1 | 33 | elements_v02:R0603 | R10 |
| 1 | 33k | elements_v02:R0603 | R34 |
| 1 | 8MHz | elements_v02:HC49UP | Q1 |
| 1 | ADC_TEST | elements_v02:PAD.03X.03 | TP1 |
| 1 | LM4040B10 | elements_v02:DBZ_R-PDSO-G3 | IC1 |
| 1 | LME49720 | elements_v02:SO08 | IC14 |
| 1 | LP4OA1PBCT | elements_v02:LP4OA1PBCT | SW1 |
| 1 | M05X2MINIJTAG | elements_v02:2X5-1.27 | JP1 |
| 1 | M05X2PTH | elements_v02:AVR_ICSP | JP3 |
| 1 | M06SIP | elements_v02:1X06 | JP2 |
| 1 | MCP6002 | elements_v02:SO08 | IC9 |
| 1 | MMBT3904 | elements_v02:SOT23-BEC | Q2 |
| 1 | SSL-LX5093PC | elements_v02:LED5MM | LED2 |
| 1 | SSL-LX5093TC | elements_v02:LED5MM | LED1 |
| 1 | STM32F405RGT6 | elements_v02:TQFP-10X10-64 | IC10 |
| 1 | WM8731 | elements_v02:SSOP28 | IC12 |
More from mort13/clandestine_circuitry
12- 2 layers69.2 × 107 mm
- 4 layers88.9 × 109.9 mm
- 2 layers88.9 × 106 mm
- 2 layers69.2 × 106.7 mm
- 2 layers39.3 × 106.7 mm
- 2 layers48.8 × 110 mm
- 2 layers38.7 × 106.7 mm
- 2 layers35.6 × 110 mm
- 2 layers43 × 110 mm
- 2 layers90.3 × 113.3 mm
- 2 layers19 × 108.4 mm
Similar boards
- 2 layers78.1 × 102.9 mm
- 2 layers171.5 × 106.7 mm
Sequencer
westlicht/performer-hardware
PER|FORMER Eurorack Sequencer - Hardware Design Files
435 parts110 - 2 layers77.4 × 128.5 mm
- 2 layers90 × 110 mm
- 2 layers39.4 × 106.7 mm
Nearness
sarnesjo/nearness
Minimal panning mixer for the Eurorack modular synthesizer system
52 parts99 - 2 layers18.5 × 110 mm
Exits board A
ramphands/Exits
4hp DIY eurorack line and headphone output module based on the Nearness and AJH headphone amp modules
42 parts33 - 2 layers49.8 × 110 mm
Nearness
bmoren/attenuated-nearness
a 6hp variation of the nearness eurorack module which adds an attenuator to each input!
61 parts17 - 2 layers99.1 × 47.7 mm
Exits-1U
benregnier/Exits-1U
4hp DIY eurorack line and headphone output module based on the "Exits" module by Ramphands, 1U format with IJ outs
70 parts4
Questions
How big is the Elements v02 PCB?
It measures 164.5 × 106 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Elements v02 use?
197 parts, built around the STM32F405RGT6, MCP6004-E/P, LME49720NA and MCP6002-I/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Elements v02 KiCad files?
From the mort13/clandestine_circuitry repository on GitHub, at the commit this page was made from: the board is elements/hardware_design/pcb/KiCad/elements_v02.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Elements v02 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).