2 layers124 × 112 mm
Overview
The MCP6002-I/P is an operational Amplifier made by Microchip Technology in a PDIP-8 package with 8 pins. -40℃~+85℃ 1.8V~6V 100uA 1MHz 1pA 1pA 2 23mA 28nV/√Hz@1kHz 2uV/℃ 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-8 Operational Amplifier ROHS.
PCBKit's library has its KiCad symbol (dk_Linear-Amplifiers-Instrumentation-OP-Amps-Buffer-Amps:MCP6002-I_P, from Digikey) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 42 are in stock at JLCPCB (part C640394). 103 open-source boards in 75 repositories on GitHub use it.
Symbol
Footprint
Parameters
15- Common Mode Rejection Ratio(CMRR)
- 76dB
- Features
- ESD Protection
- Gain Bandwidth Product
- 1MHz
- Ib - Input Bias Current
- 1pA
- Input Offset Current(Ios)
- 1pA
- Input Offset Voltage Drift(Vos TC)
- 2uV/℃
- Input Voltage Noise Density
- 28nV/√Hz@1kHz
- Number of Channels
- 2
- Operating Temperature
- -40℃~+85℃
- Output Current
- 23mA
- Quiescent Current
- 100uA
- Rail to Rail
- Rail-to-Rail Input, Rail-to-Rail Output
- Single supply
- 1.8V~6V
- Slew Rate
- 600V/ms
- Vos - Input Offset Voltage
- 4.5mV
Order codes
1- MCP6002-I/PLCSC C640394
Pinout
8| Pin | Name | Type |
|---|---|---|
| 1 | — | Output |
| 2 | — | Input |
| 3 | — | Input |
| 4 | VDD | Power in |
| 5 | — | Input |
| 6 | — | Input |
| 7 | — | Output |
| 8 | VSS | Power in |
Open-source boards using it
All 103- 2 layers144 × 80 mm
DVDLaserScanner
GaudiLabs/OpenLaserScanningMicroscope
Open Source Laser Scanning Microscope
83 parts345GPL-3.0 - 2 layers50.8 × 107.9 mm
- 4 layers60 × 95 mm
STM32H7 GuitarPedal
GuitarML/GuitarPedalSTM32
Guitar pedal using a stm32h7 microcontroller programmed with CubeIDE (PCB and Firmware)
101 parts100MIT - 2 layers72.4 × 91.4 mm
Pedal pi Robin
thawney/PedalPiV2
Pedal Pi V2 by Thawney is an all new and regularly maintained Pedal-Pi by electrosmash; a lo-fi programmable guitar pedal that works with the Raspberry Pi ZERO Board.
54 parts45GPL-3.0 - 2 layers97 × 77.5 mm
ESPlant
CCHS-Melbourne/ESPlant
Environmental Sensor Plant - solar WiFi gardening/meteorological sensor using ESP8266
77 parts37 - 2 layers48 × 110 mm
- 2 layers65 × 56 mm
Show this part on your page
<iframe src="https://pcbkit.io/embed/parts/microchip/MCP6002-I/P" title="MCP6002-I/P in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/microchip/MCP6002-I/P.jpg" alt="MCP6002-I/P" width="1200" height="900">[](https://pcbkit.io/parts/microchip/MCP6002-I/P)Questions
Is there a KiCad symbol and footprint for the MCP6002-I/P?
Yes. The symbol is dk_Linear-Amplifiers-Instrumentation-OP-Amps-Buffer-Amps:MCP6002-I_P and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the MCP6002-I/P?
PDIP-8, with 8 pins. Its footprint is drawn on this page.
Where is the MCP6002-I/P datasheet?
Microchip Technology publishes it: the Datasheet link on this page opens it.
Where can I order the MCP6002-I/P?
JLCPCB lists it as part C640394, with 42 in stock; the sellers' links on this page open their listings.
What can replace the MCP6002-I/P?
Parts like it in the library: the LM358N by HGSEMI, the LM358N/NOPB by Texas Instruments, the LM741CN/NOPB by Texas Instruments and the NE5532P by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the MCP6002-I/P?
103 boards in 75 repositories on GitHub; the most starred are listed on this page, with their KiCad files.
Parts like it
8
LM358N
DIP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 30mA 3V~36V 50nA 7mV 800uA 80dB Built-in compensation DIP-8 Operational Amplifier ROHSHGSEMIOperational AmplifierLM358N/NOPB
PDIP-8-16V~-1.5V、1.5V~16V 0℃~+70℃ 1MHz 1mA 2 2mV 3V~32V 40mA 45nA 5nA 65dB 7uV/℃ Built-in compensation PDIP-8 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierLM741CN/NOPB
DIP-8-18V~18V 0℃~+70℃ 1 1.5MHz 1.7mA 25mA 2mV 300nA 500V/ms 7.5uV/℃ 80nA 90dB Overvoltage protection DIP-8 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierNE5532P
PDIP-8-15V~15V 0℃~+70℃ 100dB 10MHz 150nA 16mA 1uA 2 38mA 4mV 5nV/√Hz@1kHz 5uV/℃ 9V/us Built-in compensation PDIP-8 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierLM358N(XBLW)
DIP-8-12V~-1.5V、1.5V~12V 0℃~+70℃ 2 3V~24V 3nA 40mA 45nA 500uA 5mV 600V/ms 7uV/℃ 90dB DIP-8 Operational Amplifier ROHSXBLWOperational AmplifierUA741CP(XBLW)
DIP-8-22V~22V 0℃~+70℃ 1 1.7mA 200nA 25mA 500V/ms 6mV 800nA 96dB DIP-8 Operational Amplifier ROHSXBLWOperational AmplifierUA741CP
PDIP-8-15V~15V -5V~15V 0℃~+70℃ 1 2.8mA 200nA 40mA 500V/ms 500nA 6mV 90dB Built-in compensation PDIP-8 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierLM358AN
DIP-8-18V~18V -40℃~+85℃ 2 20nA 2nA 3mV 500uA 50mA 5V~36V 700V/ms 700kHz 7uV/℃ 80dB DIP-8 Operational Amplifier ROHSHGSEMIOperational Amplifier