

Confluence
Collection of diy synth projects
- Size
- 90.3 × 113.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 69
- Nets
- 50
- Pads
- 238
- Tracks, vias
- 355, 84
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 30 May 2024
- Updated
- 6 May 2025
Overview
Confluence is an open-source printed circuit board by mort13, from the mort13/clandestine_circuitry repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 90.3 × 113.3 mm with 69 parts on 50 nets, routed with 355 tracks and 84 vias.
Its parts include 24 resistors, 20 capacitors, 15 connectors, 3 ICs and 2 diodes.
README
README.mdclandestine_circuitry
Collection of diy synth projects Be aware, some schematics and boardfiles may contain errors and bugs. Especially the ones designed by me.
Parts
69| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R4, R5, R6, R10, R11, R12, R15, R16, R17, R18, R19, R20, R23, R24 +2 |
| 12 | 10pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12 |
| 6 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17, C18, C19, C22, C23, C24 |
| 6 | 50k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R8, R13, R14, R21, R22 |
| 3 | TL074 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1, U2, U3 |
| 2 | 10uF / 25 | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C25, C26 |
| 2 | 1N5819 | Diode_THT:D_DO-41_SOD81_P2.54mm_Vertical_AnodeUp | D1, D2 |
| 2 | AudioBus | mort_mix:Pins_2x05_2.54mm_TH_Europower_shrouded | J3, J4 |
| 1 | Left Out | mort_mix:PJ398SM | J6 |
| 1 | Left in | mort_mix:PJ398SM | J1 |
| 1 | Main Volume | mort_mix:Potentiometer_Alpha_RD901F-40-00D_dual_Vertical_withhole | RV4 |
| 1 | Panning | mort_mix:Potentiometer_Alpha_RD901F-40-00D_dual_Vertical_withhole | RV1 |
| 1 | Power | mort_mix:Pins_2x05_2.54mm_TH_Europower_shrouded | J16 |
| 1 | Return 1 L | mort_mix:PJ398SM | J12 |
| 1 | Return 1 R | mort_mix:PJ398SM | J13 |
| 1 | Return 2 L | mort_mix:PJ398SM | J14 |
| 1 | Return 2 R | mort_mix:PJ398SM | J15 |
| 1 | Right Out | mort_mix:PJ398SM | J5 |
| 1 | Right in | mort_mix:PJ398SM | J2 |
| 1 | Send | mort_mix:Potentiometer_Alpha_RD901F-40-00D_dual_Vertical_withhole | RV3 |
| 1 | Send 1 L | mort_mix:PJ398SM | J8 |
| 1 | Send 1 R | mort_mix:PJ398SM | J9 |
| 1 | Send 1/2 | PCM_4ms_Switch:Switch_Toggle_DPDT_SubMini | SW1 |
| 1 | Send 2 L | mort_mix:PJ398SM | J10 |
| 1 | Send 2 R | mort_mix:PJ398SM | J11 |
| 1 | Volume | mort_mix:Potentiometer_Alpha_RD901F-40-00D_dual_Vertical_withhole | RV2 |
More from mort13/clandestine_circuitry
12- 2 layers88.9 × 106 mm

- 2 layers164.5 × 106 mm

- 2 layers69.2 × 107 mm

- 4 layers88.9 × 109.9 mm

- 2 layers88.9 × 106 mm

- 2 layers69.2 × 106.7 mm

- 2 layers39.3 × 106.7 mm

- 2 layers48.8 × 110 mm

- 2 layers38.7 × 106.7 mm

- 2 layers35.6 × 110 mm

- 2 layers43 × 110 mm

- 2 layers19 × 108.4 mm

Similar boards
- 2 layers117.3 × 54.5 mm

- 2 layers100 × 96 mm

Backlight
jackw01/scanlight
A better light source for scanning color negative film
69 parts397CERN-OHL-W-2.0 - 2 layers135.9 × 102.2 mm

Ergo42
Biacco42/Ergo42
7x4 ortho linear split keyboard - The Answer to the Ultimate Question of Life, the Universe, and at least Keyboards
69 parts218 - 2 layers104.1 × 71.1 mm

Minifp
eigenco/frankenpi
This is an experimental project to connect Raspberry Pi with the help of cheap Cyclone IV FPGA board to 8-bit ISA bus to act as multiple different devices.
69 parts139 - 2 layers90 × 140 mm

Drumkid
mattybrad/drumkid
Version 4 was the first successful working design, with full code, schematics, Gerbers, etc available on GitHub.
69 parts137 - 2 layers120 × 60 mm

Overglade Badges
KaiPereira/Overglade-Badges
NFC hackathon badges for the Overglade game jam in Singapore!
69 parts126 - 2 layers142 × 20 mm

DeskController
BerkeleyHCI/PolymorphicBlocks
A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.
69 parts94BSD-3-Clause - 2 layers163.1 × 111.9 mm

Questions
How big is the Confluence PCB?
It measures 90.3 × 113.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Confluence use?
69 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Confluence KiCad files?
From the mort13/clandestine_circuitry repository on GitHub, at the commit this page was made from: the board is Confluence/Confluence.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Confluence design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).