Skip to the content
2 layers49.8 × 110 mmNearness, the printed circuit board in 3D

a 6hp variation of the nearness eurorack module which adds an attenuator to each input!

Size
49.8 × 110 mm
Copper layers
2
Thickness
1.6 mm
Parts
61
Nets
39
Pads
191
Tracks, vias
288, 13
Pours
4
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
2 Aug 2018
Updated
25 Nov 2020

Overview

Nearness is an open-source printed circuit board by bmoren, from the bmoren/attenuated-nearness repository on GitHub. It is a 2-layer board of 49.8 × 110 mm with 61 parts on 39 nets, routed with 288 tracks and 13 vias.

It is built around the LME49720NA and 1N5819HW. Its parts include 24 resistors, 16 connectors, 8 capacitors, 2 ICs and 2 diodes. It belongs with the audio and music boards of this library.

Main components

2

README

readme.md

Attenuated nearness

(aka. 52800)

Nearness with attenuators for each input

The idea is to have some number of input jacks (seven, here) mixed down to two output jacks, with each input representing a fixed pan position somewhere between the two extremes represented by the outputs. Plug a signal into the topmost input to send it entirely to the top output, the middle one to send it equally to both, etc.

Attenuated nearness builds on this original idea by adding a per input attenuator. This should give more flexibility in using this as a final or only mixing stage in small systems.

More info in this discussion on llllllll.co: https://llllllll.co/t/prototyping-nearness-a-minimal-panning-mixer-module/8330

Original Nearness Repo: https://github.com/sarnesjo/nearness

Build guide

  1. Start with the surface-mount components. Mind the orientation of the ICs and diodes. (I like to do the whole backpack board first then the jack/pot board)
  2. Solder the pin headers to join the 2 boards. (Be mindful of the socket/pin relationship if you are upgrading from a stock nearness.)
  3. Place the jacks & pots on the PCB.
  4. Screw on the panel, then solder jacks and pots.

BOM

Build of Materials

Mouser Project Link: https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=e1ea3fb0a7

License

CC BY-SA 4.0.
Build and use at your own risk! I am not responsible for any damage to self or otherwise that arises from using this project!

Parts

61
QtyValueFootprintReferences
10100kmodular:R_0805_HandSoldering_TopLabelR1, R14, R15, R16, R17, R18, R19, R20, R21, R22
9PJ301M12modular:Thonkiconn_small_holesJ1, J2, J3, J4, J5, J6, J7, J8, J9
7POTmodular:tall_trimmer_pot_9mmRV1, RV2, RV3, RV4, RV5, RV6, RV7
4100nmodular:C_0805_HandSoldering_TopLabelC5, C6, C7, C8
2103kmodular:R_0805_HandSoldering_TopLabelR3, R12
2113kmodular:R_0805_HandSoldering_TopLabelR5, R10
2141kmodular:R_0805_HandSoldering_TopLabelR7, R8
21M67modular:R_0805_HandSoldering_TopLabelR2, R13
21N5819HWDiodes_SMD:D_SOD-123D1, D2
21kmodular:R_0805_HandSoldering_TopLabelR23, R24
2215kmodular:R_0805_HandSoldering_TopLabelR6, R9
222pmodular:C_0805_HandSoldering_TopLabelC1, C2
222umodular:C_0805_HandSoldering_TopLabelC3, C4
2439kmodular:R_0805_HandSoldering_TopLabelR4, R11
2CONN_01X03Pin_Headers:Pin_Header_Angled_1x03_Pitch2.54mmP5, P6
2Conn_01x05Socket_Strips:Socket_Strip_Straight_1x05_Pitch2.54mmJ13, J14
2Conn_01x05Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mmJ11, J12
2LME49720Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mmU1, U2
1Conn_02x05_Odd_EvenPin_Headers:Pin_Header_Straight_2x05_Pitch2.54mmJ10
1LOGOmodular:sun_mediumG***
1LOGOmodular:sun_smallG***

Similar boards

  • 2 layers39.4 × 106.7 mmNearness, the printed circuit board in 3D

    Nearness

    sarnesjo/nearness

    Minimal panning mixer for the Eurorack modular synthesizer system

    52 parts99
  • 2 layers18.5 × 110 mmExits board A, the printed circuit board in 3D

    Exits board A

    ramphands/Exits

    4hp DIY eurorack line and headphone output module based on the Nearness and AJH headphone amp modules

    42 parts33
  • 2 layers99.1 × 47.7 mmExits-1U, the printed circuit board in 3D

    Exits-1U

    benregnier/Exits-1U

    4hp DIY eurorack line and headphone output module based on the "Exits" module by Ramphands, 1U format with IJ outs

    70 parts4
  • 2 layers164.6 × 39.9 mmNearless, the printed circuit board in 3D

    Nearless

    rhinocerose/eurorack-1U-nearless

    1U Intellijel Rework of Nearness. 10hp.

    58 parts
  • 2 layers164.5 × 106 mmElements v02, the printed circuit board in 3D

    Elements v02

    mort13/clandestine_circuitry

    Collection of diy synth projects

    197 parts12GPL-3.0
  • 2 layers29.2 × 106.7 mmShades v30, the printed circuit board in 3D

    Shades v30

    jonstapleton/mutable_eurorack

    Eurorack modules

    77 parts
  • 2 layers38.3 × 110 mmExits, the printed circuit board in 3D

    Exits

    kitspace-test-repos/kicad6-file-collection

    66 partsMIT
  • 2 layers134 × 109.5 mmFreeDSP SMD AB plus, the printed circuit board in 3D

    FreeDSP SMD AB plus

    CyberPit/FreeDSP_Classic_SMD_AB_plus-II

    An extended version of FreeDSP Classic SMD A/B

    233 parts6

Questions

How big is the Nearness PCB?

It measures 49.8 × 110 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Nearness use?

61 parts, built around the LME49720NA and 1N5819HW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Nearness KiCad files?

From the bmoren/attenuated-nearness repository on GitHub, at the commit this page was made from: the board is pcb/nearness.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Nearness design in my own project?

Its repository states no licence, so its author keeps all rights: ask bmoren before reusing the design.