2 layers100 × 92 mm
GateDriverPanel
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
368 parts2GPL-3.0
2 layers64 × 23 mm
DualGateDriver
kavionic/TeslaDriver2Firmware, support software, and CAD files for my tesla coil project.
- Size
- 64 × 23 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 17
- Pads
- 106
- Tracks, vias
- 336, 40
- Pours
- 19
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 21 Jun 2016
- Updated
- 5 Mar 2017
Overview
DualGateDriver is an open-source printed circuit board by kavionic, from the kavionic/TeslaDriver repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 64 × 23 mm with 37 parts on 17 nets, routed with 336 tracks and 40 vias.
It is built around the NXE2S1212MC-R7, L78L05ACD13 and SS210, with the ZMY12 among its other parts. Its parts include 13 capacitors, 10 resistors, 6 ICs and 6 diodes.
Main components
4
NXE2S1212MC-R7
SMD-5P,12.7x10.4mm-40℃~+85℃ 10.8V~13.2V 10uF 115kHz 12.7mm 12V 167mA 2W 3kV 55mVp-p 76.5% Short Circuit Protection SMD-5P,12.7x10.4mm Isolated Power Modules ROHSMurataIsolated Power Modules
L78L05ACD13
SOIC-80℃~+125℃@(Tj) 1 1.7V 100mA 20V 40uV 49dB@(120Hz) 5V 6mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive SOIC-8 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
SS210
SMA(DO-214AC)-55℃~+150℃ 1 Independent 100V 2A 500uA@100V 850mV@2A SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
ZMY12
DO-213AB-50℃~+150℃ 1 Independent 1.3W 11.4V~12.7V 12V 1uA@7V 4Ω ±5% DO-213AB Zener Diodes ROHSDIOTECZener Diodes
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100n | MyCapacitors:C_0603 | C5, C6, C8, C10, C11, C12 |
| 4 | 1 | MyResistors:R_1206 | R1, R2, R9, R10 |
| 4 | 3R9 | MyResistors:R_1206 | R3, R4, R6, R8 |
| 3 | 1u | MyCapacitors:C_0603 | C2, C3, C4 |
| 2 | 10u | MyCapacitors:C_1206 | C9, C13 |
| 2 | DZ2J130M0L | MyDiodes:SMini2-F5-B | D4, D6 |
| 2 | GateDriver | MyConnectors:GateDriverSub | U1, U4 |
| 2 | MountingHole | MyMechanical:MH6 | M1, M2 |
| 2 | NP | MyResistors:R_0603 | R5, R7 |
| 2 | NP | MyCapacitors:C_0603 | C1, C7 |
| 2 | NXE2S1212MC | MyFootprints:NXE2_DCDC | U5, U6 |
| 2 | SS210 | MyDiodes:Diode-SMA_Standard | D2, D5 |
| 2 | ZMY12 | MyDiodes:MELF_Standard | D1, D3 |
| 1 | L78L05ACD | MyFootprints:SOIC-8_3.9x4.9mm_Pitch1.27mm | U2 |
| 1 | SI8233 | MyFootprints:SOIC-16_7.5x10.3mm_Pitch1.27mm | U3 |
Questions
How big is the DualGateDriver PCB?
It measures 64 × 23 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DualGateDriver use?
37 parts, built around the NXE2S1212MC-R7, L78L05ACD13, SS210 and ZMY12. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DualGateDriver KiCad files?
From the kavionic/TeslaDriver repository on GitHub, at the commit this page was made from: the board is Schematics/TeslaDriverHP/DualGateDriver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DualGateDriver design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from kavionic/TeslaDriver
8- 2 layers64 × 92 mm
DualGateDriverPanel
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
148 parts2GPL-3.0 - 2 layers100 × 100 mm
TeslaDriver
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
118 parts2GPL-3.0 - 2 layers71 × 95 mm
TeslaController
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
100 parts2GPL-3.0 - 2 layers46 × 37 mm
QuadGateDriver
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
95 parts2GPL-3.0 - 2 layers80 × 100 mm
TeslaDriver
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
83 parts2GPL-3.0 - 2 layers80 × 100 mm
TeslaDriverHP
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
68 parts2GPL-3.0 - 2 layers25 × 23 mm
GateDriver
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
23 parts2GPL-3.0
Similar boards
- 2 layers
Aquarium controller
daniestevez/aquarium-controller
Arduino-based Aquarium controller
48 parts6Unlicense - 4 layers98 × 75 mm
PiFinder4
brickbots/PiFinder
A plate solving telescope finder based around a Raspberry PI and RPI HQ Camera
157 parts257GPL-3.0 - 4 layers98 × 48 mm
Esphome pressure
gcormier/esphome-pressure
esphome board with a differential pressure sensor, supporting a variety of power sources
51 parts102 - 4 layers75.2 × 99.5 mm
FOC
nordstream3/FOC
Date | Manufacturer | amount | includes | shipping & tax | price | -------- | -------- | -------- | -------- | -------- | -------- | 2024-01-17 | JLCPCB | 10 boards | All assembled excl fets and caps | YES, to EU |…
261 parts81 - 4 layers35 × 35 mm
Lemon pepper
VIPQualityPost/lemon-pepper-stepper
simplefoc all-in-one 50W hybrid stepper + bldc driver
87 parts75MIT - 4 layers53 × 39 mm
Avclan mockingboard rounded
halleysfifthinc/AVCLAN-Mockingboard
Emulate a CD Changer on a Toyota AVC LAN network
43 parts65GPL-3.0 - 6 layers76 × 46.4 mm
Rp2350 driver
sequoia-hope/rp2350-motor-controller
An RP2350 based brushless motor controller
291 parts39 - 2 layers81 × 59 mm
Alarmbuddy
gcormier/alarmbuddy
The output current for sensors is limited to a few milliamps.
34 parts22