
GateDriverPanel
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.

Firmware, support software, and CAD files for my tesla coil project.
TeslaDriverHP is an open-source printed circuit board by kavionic, from the kavionic/TeslaDriver repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 80 × 100 mm with 68 parts on 22 nets, routed with 755 tracks and 245 vias.
It is built around the DS18B20, IRFP4310ZPBF and SK520. Its parts include 30 capacitors, 15 resistors, 6 ICs, 5 connectors and 4 diodes.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 3n9/250V | MyCapacitors:C_0805 | C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25 +8 |
| 12 | 1 | MyResistors:R_2512 | R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13 |
| 4 | GateDriver | MyConnectors:GateDriverMain | U1, U2, U3, U4 |
| 4 | IRFP4310ZPbF | MyFootprints:TO-247 | Q1, Q2, Q3, Q4 |
| 4 | MountingHole | MyMechanical:MH7x3 | M1, M2, M3, M4 |
| 4 | SK520 | MyDiodes:DO-214AB | D1, D2, D3, D4 |
| 3 | 4k7 | MyResistors:R_0603 | R1, R14, R15 |
| 2 | 1000u/63V | MyCapacitors:C_Radial_D16_L25_P7.5 | C1, C2 |
| 2 | 100n | MyCapacitors:C_0603 | C29, C30 |
| 2 | 2.2u/63V | MyCapacitors:C_Rect_L18_W8_P15 | C3, C4 |
| 2 | DS18B20 | MyFootprints:TO-92_Inline_Narrow_Oval | U5, U6 |
| 1 | CONTROL | MyConnectors:PinHeaderMale_2x08 | P3 |
| 1 | PWR_GND | MyConnectors:PowerPad15_5_via | P2 |
| 1 | PWR_IN+ | MyConnectors:PowerPad15_5_via | P1 |
| 1 | PWR_OUT_L1 | MyConnectors:PowerPad15_5_via | P4 |
| 1 | PWR_OUT_L2 | MyConnectors:PowerPad15_5_via | P5 |

kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.

kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.

kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.

kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.

kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.

kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.

kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.

kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.

Testato/ADB-3020-CDV
CDV (Community Digital Version) of the switching power supply ADB-3020

UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

pablozg/freeds
Derivador de energía solar excedente creado por Pablo Zerón, Diseño PCB por Amcalo, Tester original por Aeizoon, Wiki por Zoilo Mora

AK-Homberger/NMEA2000WifiGateway-with-ESP32
This repository shows how to build a NMEA2000 WiFi Gateway with voltage and temperature alarms.

fehlfarbe/arduino-motorfocus
Arduino motorfocus with moonlite protocol for telescopes



felixwittwer/homeassistant_automaic_greenhouse
A cool Project to make your greenhouse smart. What about automaic irrigation and collecting enviromental data right from your garden.
It measures 80 × 100 mm and has 2 copper layers, 1.6 mm thick.
68 parts, built around the DS18B20, IRFP4310ZPBF and SK520. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the kavionic/TeslaDriver repository on GitHub, at the commit this page was made from: the board is Schematics/TeslaDriverHP/TeslaDriverHP.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).