2 layers64 × 92 mm
DualGateDriverPanel
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
148 parts2GPL-3.0
2 layers100 × 92 mm
GateDriverPanel
kavionic/TeslaDriver2Firmware, support software, and CAD files for my tesla coil project.
- Size
- 100 × 92 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 368
- Nets
- 14
- Pads
- 912
- Tracks, vias
- 3,136, 336
- Pours
- 512
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 21 Jun 2016
- Updated
- 5 Mar 2017
Overview
GateDriverPanel is an open-source printed circuit board by kavionic, from the kavionic/TeslaDriver repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 92 mm with 368 parts on 14 nets, routed with 3,136 tracks and 336 vias.
It is built around the NCP81071AD, SS210 and ZMY12. Its parts include 176 capacitors, 64 resistors, 64 diodes and 32 ICs.
Main components
3
NCP81071AD
SOIC-8-40℃~+140℃ 1.4mA 1.8V~2.2V 2 4.5V~20V 5A 5A 800mV~1.2V 8ns 8ns Low Side MOSFET Under Voltage Protection SOIC-8 Gate Drivers ROHSonsemiGate Drivers
SS210
SMA(DO-214AC)-55℃~+150℃ 1 Independent 100V 2A 500uA@100V 850mV@2A SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
ZMY12
DO-213AB-50℃~+150℃ 1 Independent 1.3W 11.4V~12.7V 12V 1uA@7V 4Ω ±5% DO-213AB Zener Diodes ROHSDIOTECZener Diodes
Parts
368| Qty | Value | Footprint | References |
|---|---|---|---|
| 80 | 100n | MyCapacitors:C_0603 | C11, C11, C11, C11, C11, C11, C11, C11, C11, C11, C11, C11, C11, C11, C11, C11 +64 |
| 48 | 1u | MyCapacitors:C_0603 | C10, C10, C10, C10, C10, C10, C10, C10, C10, C10, C10, C10, C10, C10, C10, C10 +32 |
| 32 | 1 | MyResistors:R_1206 | R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2 +16 |
| 32 | 4 | MyResistors:R_1206 | R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1 +16 |
| 32 | NP | MyCapacitors:C_0603 | C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1 +16 |
| 32 | SS210 | MyDiodes:Diode-SMA_Standard | D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1 +16 |
| 32 | ZMY12 | MyDiodes:MELF_Standard | D3, D3, D3, D3, D3, D3, D3, D3, D3, D3, D3, D3, D3, D3, D3, D3 +16 |
| 16 | 1u | Capacitors_SMD:C_0603 | C5, C5, C5, C5, C5, C5, C5, C5, C5, C5, C5, C5, C5, C5, C5, C5 |
| 16 | GateDriver | MyConnectors:GateDriverSub | U2, U2, U2, U2, U2, U2, U2, U2, U2, U2, U2, U2, U2, U2, U2, U2 |
| 16 | GateTR10x4 | MyMagnetics:GateTR10x4_HV | T1, T1, T1, T1, T1, T1, T1, T1, T1, T1, T1, T1, T1, T1, T1, T1 |
| 16 | MountingHole | MyMechanical:MH6 | M1, M1, M1, M1, M1, M1, M1, M1, M1, M1, M1, M1, M1, M1, M1, M1 |
| 16 | NCP81071A | MyFootprints:SOIC-8_3.9x4.9mm_Pitch1.27mm | U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1 |
More from kavionic/TeslaDriver
8- 2 layers100 × 100 mm
TeslaDriver
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
118 parts2GPL-3.0 - 2 layers71 × 95 mm
TeslaController
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
100 parts2GPL-3.0 - 2 layers46 × 37 mm
QuadGateDriver
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
95 parts2GPL-3.0 - 2 layers80 × 100 mm
TeslaDriver
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
83 parts2GPL-3.0 - 2 layers80 × 100 mm
TeslaDriverHP
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
68 parts2GPL-3.0 - 2 layers64 × 23 mm
DualGateDriver
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
37 parts2GPL-3.0 - 2 layers25 × 23 mm
GateDriver
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
23 parts2GPL-3.0
Similar boards
- 4 layers98 × 75 mm
PiFinder4
brickbots/PiFinder
A plate solving telescope finder based around a Raspberry PI and RPI HQ Camera
157 parts257GPL-3.0 - 4 layers98 × 48 mm
Esphome pressure
gcormier/esphome-pressure
esphome board with a differential pressure sensor, supporting a variety of power sources
51 parts102 - 4 layers75.2 × 99.5 mm
FOC
nordstream3/FOC
Date | Manufacturer | amount | includes | shipping & tax | price | -------- | -------- | -------- | -------- | -------- | -------- | 2024-01-17 | JLCPCB | 10 boards | All assembled excl fets and caps | YES, to EU |…
261 parts81 - 4 layers35 × 35 mm
Lemon pepper
VIPQualityPost/lemon-pepper-stepper
simplefoc all-in-one 50W hybrid stepper + bldc driver
87 parts75MIT - 4 layers53 × 39 mm
Avclan mockingboard rounded
halleysfifthinc/AVCLAN-Mockingboard
Emulate a CD Changer on a Toyota AVC LAN network
43 parts65GPL-3.0 - 6 layers76 × 46.4 mm
Rp2350 driver
sequoia-hope/rp2350-motor-controller
An RP2350 based brushless motor controller
291 parts39 - 2 layers81 × 59 mm
Alarmbuddy
gcormier/alarmbuddy
The output current for sensors is limited to a few milliamps.
34 parts22 - 4 layers55.5 × 0 mm
Questions
How big is the GateDriverPanel PCB?
It measures 100 × 92 mm and has 2 copper layers, 1.6 mm thick.
What parts does the GateDriverPanel use?
368 parts, built around the NCP81071AD, SS210 and ZMY12. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GateDriverPanel KiCad files?
From the kavionic/TeslaDriver repository on GitHub, at the commit this page was made from: the board is Schematics/TeslaDriverHP/GateDriverPanel.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the GateDriverPanel design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).