Skip to the content
12345678

NCP81071AD

onsemiExtended

-40℃~+140℃ 1.4mA 1.8V~2.2V 2 4.5V~20V 5A 5A 800mV~1.2V 8ns 8ns Low Side MOSFET Under Voltage Protection SOIC-8 Gate Drivers ROHS

Part id
onsemi/NCP81071AD
Category
Gate Drivers
Package
SOIC-8
Pins
8
In stock
0 at JLCPCB (C603796)
Used on
3 open-source boards

Overview

The NCP81071AD is a gate Driver made by onsemi in a SOIC-8 package with 8 pins. -40℃~+140℃ 1.4mA 1.8V~2.2V 2 4.5V~20V 5A 5A 800mV~1.2V 8ns 8ns Low Side MOSFET Under Voltage Protection SOIC-8 Gate Drivers ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:UCC27624VQDRQ1, from EasyEDA) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C603796). 3 open-source boards in 1 repository on GitHub use it.

Symbol

1ENA2INA3GND4INB5OUTB6VDD7OUTA8ENB
EasyEDA_Cloud:UCC27624VQDRQ1From EasyEDA

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the NCP81071AD
PinNameType
1ENAUnspecified
2INAUnspecified
3GNDUnspecified
4INBUnspecified
5OUTBUnspecified
6VDDUnspecified
7OUTAUnspecified
8ENBUnspecified

Open-source boards using it

3
  • 2 layers100 × 92 mmGateDriverPanel, the printed circuit board in 3D

    GateDriverPanel

    kavionic/TeslaDriver

    Firmware, support software, and CAD files for my tesla coil project.

    368 parts2GPL-3.0
  • 2 layers25 × 23 mmGateDriver, the printed circuit board in 3D

    GateDriver

    kavionic/TeslaDriver

    Firmware, support software, and CAD files for my tesla coil project.

    23 parts2GPL-3.0
  • 2 layers80 × 100 mmTeslaDriver, the printed circuit board in 3D

    TeslaDriver

    kavionic/TeslaDriver

    Firmware, support software, and CAD files for my tesla coil project.

    83 parts2GPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the NCP81071AD?

Yes. The symbol is EasyEDA_Cloud:UCC27624VQDRQ1 and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the NCP81071AD?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the NCP81071AD datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the NCP81071AD?

JLCPCB lists it as part C603796, with 0 in stock; the sellers' links on this page open their listings.

What can replace the NCP81071AD?

Parts like it in the library: the EG2131 by EG, the SLM2186CA-DG by Sillumin, the UCC27524D by Texas Instruments and the IR2104STRPBF by Infineon Technologies. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the NCP81071AD?

3 boards in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.