6 layers90 × 180 mm
Dvk mx8m bsb
gralco/dvk-mx8m-bsb
Librem 5 Developer Kit using EmCraft's i.MX 8M System-on-Module.
684 parts7GPL-3.0
2 layers
Aquarium controller
daniestevez/aquarium-controller6Arduino-based Aquarium controller
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 48
- Nets
- 61
- Pads
- 193
- Tracks, vias
- 473, 85
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 16 Apr 2016
- Updated
- 12 May 2019
Overview
Aquarium controller is an open-source printed circuit board by daniestevez, from the daniestevez/aquarium-controller repository on GitHub, published under the Unlicense licence. It is a 2-layer board with 48 parts on 61 nets, routed with 473 tracks and 85 vias.
It is built around the ATMEGA328PB-AU, DS3231MZ+ and L78L05ACD13, with the 2N7002E and DB2J20900L among its other parts. Its parts include 16 capacitors, 12 resistors, 5 ICs, 5 connectors and 3 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5
ATMEGA328PB-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 27 2KB 32KB 8 Bit AVR Built-in FLASH Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、External pin reset (NRST)、Built-in general-purpose timer、Programmable watchdog、Touch function TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
DS3231MZ+
SOIC-8-40℃~+85℃ 2.3V~5.5V I2C Temperature compensation、Backup power management and battery charging、Alarm function、Periodic interrupt output SOIC-8 Real Time Clocks ROHSMaxim Integrated (Analog Devices)Real Time ClocksL78L05ACD13
SOIC-80℃~+125℃@(Tj) 1 1.7V 100mA 20V 40uV 49dB@(120Hz) 5V 6mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive SOIC-8 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
2N7002E
SOT-23-55℃~+150℃ 1 N-channel 2.5V 225mW 3.5Ω@5V 300mA 60V N-Channel SOT-23 MOSFETs ROHSSlkorMOSFETs
DB2J20900L
SC-90A20V 30uA@10V 500mA 500mV@500mA Standalone SC-90A Diodes - General Purpose ROHSPanasonicDiodes - General Purpose
README
README.mdaquarium-controller
Arduino-based Aquarium controller
Libraries required for the Arduino software:
- Time, DS1307RTC from http://playground.arduino.cc/Code/Time
- Timer from http://playground.arduino.cc/Code/Timer
- Timezone from https://github.com/JChristensen/Timezone
- Keypad from http://playground.arduino.cc/Code/Keypad
- U8glib from https://github.com/olikraus/u8glib
- OneWireNoResistor from https://github.com/bigjosh/OneWireNoResistor
Parts
48| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1u | Capacitors_SMD:C_0805 | C5, C9, C11, C12, C13, C14, C15, C16 |
| 6 | 100 | Resistors_SMD:R_0805 | R4, R5, R8, R9, R10, R11 |
| 5 | 100n | Capacitors_SMD:C_0805 | C1, C3, C4, C8, C10 |
| 3 | 100K | Resistors_SMD:R_0805 | R6, R7, R12 |
| 3 | 10k | Resistors_SMD:R_0805 | R1, R2, R3 |
| 3 | 2N7002E | TO_SOT_Packages_SMD:SOT-23 | Q1, Q2, Q3 |
| 3 | CONN_01X02 | Socket_Strips:Socket_Strip_Straight_1x02 | P1, P2, P4 |
| 2 | 22p | Capacitors_SMD:C_0805 | C6, C7 |
| 2 | DB2J20900L | SMini2:SMini2-F5-B | D1, D2 |
| 1 | 16MHz | Crystals:Crystal_HC49-SD_SMD | Y1 |
| 1 | 330n | Capacitors_SMD:C_0805 | C2 |
| 1 | 4050 | Housings_SSOP:TSSOP-16_4.4x5mm_Pitch0.65mm | U4 |
| 1 | ATMEGA328PB | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | IC1 |
| 1 | AVR-ISP-6 | Pin_Headers:Pin_Header_Straight_2x03 | ICSP1 |
| 1 | BARREL_JACK | Connect:BARREL_JACK | CON1 |
| 1 | Battery | BC501SM:BC501SM | BT1 |
| 1 | CONN_01X08 | Socket_Strips:Socket_Strip_Straight_1x08 | P3 |
| 1 | DOGM128-6 | LED55X46:LED55X46 | LCD1 |
| 1 | DS3231M | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U1 |
| 1 | L78L05ACD | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U2 |
| 1 | MIC5504 | TO_SOT_Packages_SMD:SOT-23-5 | U3 |
The 47 most common of 48 parts.
Questions
What parts does the Aquarium controller use?
48 parts, built around the ATMEGA328PB-AU, DS3231MZ+, L78L05ACD13 and 2N7002E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Aquarium controller KiCad files?
From the daniestevez/aquarium-controller repository on GitHub, at the commit this page was made from: the board is hardware/aquarium-controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Aquarium controller design in my own project?
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers64 × 23 mm
DualGateDriver
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
37 parts2GPL-3.0 - 6 layers31.7 × 110 mm
Eurorack pmod pcb
apfaudio/eurorack-pmod
A eurorack-friendly audio frontend compatible with many FPGA boards, based on the AK4619VN audio CODEC.
155 parts241 - 2 layers35 × 54 mm
Evoluent
mon/evoluent_better_pcb
PCBs using better sensor for Evoluent VerticalMouse products
30 parts11MIT - 4 layers34.8 × 36 mm
Atmxt2952td breakout
EvanKrall/ipad_touchscreen_driver
A PCB designed to interface with the iPad (A1219) touchscreen
53 parts7 - 2 layers98.4 × 93.7 mm
Air Quality PCB
burnettlab/Indoor-Air-Quality-Monitor
2023 Portland State University Indoor Air Quality Monitor Capstone Project
48 parts3GPL-3.0 - 6 layers216 × 127 mm
Pufferfish Controller-1
pez-globo/pufferfish-electronics
Circuit schematics and PCB layouts for the Pufferfish ventilator.
559 parts3 - 4 layers70.1 × 122.2 mm
Gbc cm4-aio
will-tm/gbc-cm4-aio
This project is a drop-in replacement board that fits and Gameboy Color shell and use the same IPS display as used in GBC kits.
130 parts2