Skip to the content
12345678

L78L05ACD13

STMicroelectronicsExtended

0℃~+125℃@(Tj) 1 1.7V 100mA 20V 40uV 49dB@(120Hz) 5V 6mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive SOIC-8 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
st/L78L05ACD13
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOIC-8
Pins
8
In stock
297,470 at JLCPCB (C7543)
Used on
3 open-source boards

Overview

The L78L05ACD13 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by STMicroelectronics in a SOIC-8 package with 8 pins. 0℃~+125℃@(Tj) 1 1.7V 100mA 20V 40uV 49dB@(120Hz) 5V 6mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive SOIC-8 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Pro:L78L05ACD13TR, from EasyEDA Pro) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 297,470 are in stock at JLCPCB (part C7543). 3 open-source boards in 2 repositories on GitHub use it.

Symbol

8VIN3GND1VOUT4NC5NC6GND7GND2GND
EasyEDA_Pro:L78L05ACD13TRFrom EasyEDA Pro

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

From the datasheet

10
Supply, least
7 V · VI, operating range at IO = 1 to 40 mA, min · p. 16
Supply, most
20 V · VI, operating range at IO = 1 to 40 mA, max · p. 16
Supply, absolute maximum
30 V · VI, absolute maximum for VO = 5 V · p. 5
Junction, hottest
125 °C · AC operating junction temperature, max · p. 16
Takes working
6 mA · quiescent current, VI = 10 V, IO = 40 mA, TJ = 25 °C, max · p. 16
Gives
100 mA · output current with adequate heat sinking, max · p. 1
Output
5 V · fixed output, VI = 10 V, IO = 40 mA, TJ = 25 °C, typical · p. 16
Dropout
1.7 V · IO = 40 mA, typical · p. 16
Junction to air (SO-8)
55 K/W · junction to ambient, 6 cm² copper board heat sink, max · p. 5
Junction to case (SO-8)
20 K/W · junction to case, max · p. 5

Open-source boards using it

3
  • 2 layersAquarium controller, the printed circuit board in 3D

    Aquarium controller

    daniestevez/aquarium-controller

    Arduino-based Aquarium controller

    48 parts6Unlicense
  • 2 layers64 × 23 mmDualGateDriver, the printed circuit board in 3D

    DualGateDriver

    kavionic/TeslaDriver

    Firmware, support software, and CAD files for my tesla coil project.

    37 parts2GPL-3.0
  • 2 layers64 × 92 mmDualGateDriverPanel, the printed circuit board in 3D

    DualGateDriverPanel

    kavionic/TeslaDriver

    Firmware, support software, and CAD files for my tesla coil project.

    148 parts2GPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the L78L05ACD13?

Yes. The symbol is EasyEDA_Pro:L78L05ACD13TR and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the L78L05ACD13?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the L78L05ACD13 datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the L78L05ACD13?

JLCPCB lists it as part C7543, with 297,470 in stock; the sellers' links on this page open their listings.

What can replace the L78L05ACD13?

Parts like it in the library: the L78L05ABD13 by STMicroelectronics, the LM78L05ACMX by Texas Instruments, the MC78L05ABD by onsemi and the UA78L05ACD by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the L78L05ACD13?

3 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.