Skip to the content
2 layersAquarium controller, the printed circuit board in 3D

Arduino-based Aquarium controller

Copper layers
2
Thickness
1.6 mm
Parts
48
Nets
61
Pads
193
Tracks, vias
473, 85
Pours
1
Routed
Yes
KiCad
KiCad 4
Created
16 Apr 2016
Updated
12 May 2019

Overview

Aquarium controller is an open-source printed circuit board by daniestevez, from the daniestevez/aquarium-controller repository on GitHub, published under the Unlicense licence. It is a 2-layer board with 48 parts on 61 nets, routed with 473 tracks and 85 vias.

It is built around the ATMEGA328PB-AU, DS3231MZ+ and L78L05ACD13, with the 2N7002E and DB2J20900L among its other parts. Its parts include 16 capacitors, 12 resistors, 5 ICs, 5 connectors and 3 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

5

README

README.md

aquarium-controller

Arduino-based Aquarium controller

More information

Libraries required for the Arduino software:

Parts

48
QtyValueFootprintReferences
81uCapacitors_SMD:C_0805C5, C9, C11, C12, C13, C14, C15, C16
6100Resistors_SMD:R_0805R4, R5, R8, R9, R10, R11
5100nCapacitors_SMD:C_0805C1, C3, C4, C8, C10
3100KResistors_SMD:R_0805R6, R7, R12
310kResistors_SMD:R_0805R1, R2, R3
32N7002ETO_SOT_Packages_SMD:SOT-23Q1, Q2, Q3
3CONN_01X02Socket_Strips:Socket_Strip_Straight_1x02P1, P2, P4
222pCapacitors_SMD:C_0805C6, C7
2DB2J20900LSMini2:SMini2-F5-BD1, D2
116MHzCrystals:Crystal_HC49-SD_SMDY1
1330nCapacitors_SMD:C_0805C2
14050Housings_SSOP:TSSOP-16_4.4x5mm_Pitch0.65mmU4
1ATMEGA328PBHousings_QFP:TQFP-32_7x7mm_Pitch0.8mmIC1
1AVR-ISP-6Pin_Headers:Pin_Header_Straight_2x03ICSP1
1BARREL_JACKConnect:BARREL_JACKCON1
1BatteryBC501SM:BC501SMBT1
1CONN_01X08Socket_Strips:Socket_Strip_Straight_1x08P3
1DOGM128-6LED55X46:LED55X46LCD1
1DS3231MHousings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mmU1
1L78L05ACDHousings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mmU2
1MIC5504TO_SOT_Packages_SMD:SOT-23-5U3

The 47 most common of 48 parts.

Similar boards

  • 6 layers90 × 180 mmDvk mx8m bsb, the printed circuit board in 3D

    Dvk mx8m bsb

    gralco/dvk-mx8m-bsb

    Librem 5 Developer Kit using EmCraft's i.MX 8M System-on-Module.

    684 parts7GPL-3.0
  • 2 layers64 × 23 mmDualGateDriver, the printed circuit board in 3D

    DualGateDriver

    kavionic/TeslaDriver

    Firmware, support software, and CAD files for my tesla coil project.

    37 parts2GPL-3.0
  • 6 layers31.7 × 110 mmEurorack pmod pcb, the printed circuit board in 3D

    Eurorack pmod pcb

    apfaudio/eurorack-pmod

    A eurorack-friendly audio frontend compatible with many FPGA boards, based on the AK4619VN audio CODEC.

    155 parts241
  • 2 layers35 × 54 mmEvoluent, the printed circuit board in 3D

    Evoluent

    mon/evoluent_better_pcb

    PCBs using better sensor for Evoluent VerticalMouse products

    30 parts11MIT
  • 4 layers34.8 × 36 mmAtmxt2952td breakout, the printed circuit board in 3D

    Atmxt2952td breakout

    EvanKrall/ipad_touchscreen_driver

    A PCB designed to interface with the iPad (A1219) touchscreen

    53 parts7
  • 2 layers98.4 × 93.7 mmAir Quality PCB, the printed circuit board in 3D

    Air Quality PCB

    burnettlab/Indoor-Air-Quality-Monitor

    2023 Portland State University Indoor Air Quality Monitor Capstone Project

    48 parts3GPL-3.0
  • 6 layers216 × 127 mmPufferfish Controller-1, the printed circuit board in 3D

    Pufferfish Controller-1

    pez-globo/pufferfish-electronics

    Circuit schematics and PCB layouts for the Pufferfish ventilator.

    559 parts3
  • 4 layers70.1 × 122.2 mmGbc cm4-aio, the printed circuit board in 3D

    Gbc cm4-aio

    will-tm/gbc-cm4-aio

    This project is a drop-in replacement board that fits and Gameboy Color shell and use the same IPS display as used in GBC kits.

    130 parts2

Questions

What parts does the Aquarium controller use?

48 parts, built around the ATMEGA328PB-AU, DS3231MZ+, L78L05ACD13 and 2N7002E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Aquarium controller KiCad files?

From the daniestevez/aquarium-controller repository on GitHub, at the commit this page was made from: the board is hardware/aquarium-controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Aquarium controller design in my own project?

Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).