2 layers100 × 92 mm
GateDriverPanel
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
368 parts2GPL-3.0
2 layers71 × 95 mm
TeslaController
kavionic/TeslaDriver2Firmware, support software, and CAD files for my tesla coil project.
- Size
- 71 × 95 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 100
- Nets
- 76
- Pads
- 364
- Tracks, vias
- 1,769, 73
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 21 Jun 2016
- Updated
- 5 Mar 2017
Overview
TeslaController is an open-source printed circuit board by kavionic, from the kavionic/TeslaDriver repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 71 × 95 mm with 100 parts on 76 nets, routed with 1,769 tracks and 73 vias.
It is built around the ATXMEGA256A3-AU, ESP-12E and AP1117DG, with the BSS138, BAT54S and BZX384-C3V6 among its other parts. Its parts include 34 resistors, 22 capacitors, 17 connectors, 9 transistors and 5 ICs. It belongs with the ESP8266 and AVR (ATmega, ATtiny) boards of this library.
Main components
6
ATXMEGA256A3-AU
LQFP-64(14x14)-40℃~+85℃ 1.6V~3.6V 16KB 256KB 32MHz 4KB 50 8/16 Bit AVR Built-in FLASH LQFP-64(14x14) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
ESP-12E
SMD,24x16mm-20℃~+70℃ -90dBm 16dBm 170mA 2.4GHz 3V~3.6V 56mA 802.11b/g/n ESP8266 Chip On-board PCB Antenna Over-the-air (OTA) update UART、SPI、I2C SMD,24x16mm WiFi Modules ROHSAi-ThinkerWiFi Modules
AP1117DG
SOT-223-40℃~+125℃@(Tj) 1 1.4V@(1A) 18V 1A 70dB@(180Hz) Adjustable、Fixed Over Current Protection、Thermal shutdown Positive SOT-223-4 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsBAT54S
SOT-231 Pair Series Connection 1V@100mA 200mA 2uA@25V 30V 600mA SOT-23 Schottky Diodes ROHSMDDSchottky Diodes
BZX384-C3V6
SOD-3231 Independent 3.4V~3.8V 3.6V 300mW 5uA@1V 85Ω SOD-323 Zener Diodes ROHSNexperiaZener Diodes
Parts
100| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 4k7 | MyResistors:R_0603 | R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27, R28 +2 |
| 12 | 100n | MyCapacitors:C_0603 | C2, C3, C6, C7, C8, C11, C14, C17, C18, C19, C20, C22 |
| 9 | BSS138 | MyFootprints:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9 |
| 4 | 1k | MyResistors:R_0603 | R7, R9, R12, R32 |
| 4 | 1n | MyCapacitors:C_0603 | C4, C10, C15, C21 |
| 3 | 10k | MyResistors:R_0603 | R1, R2, R3 |
| 2 | 100u/10V | MyCapacitors:c_elec_5x5.7 | C12, C16 |
| 2 | 100u/25V | MyCapacitors:c_elec_6.3x7.7 | C1, C5 |
| 2 | 10p | MyCapacitors:C_0603 | C9, C13 |
| 2 | 150 | MyResistors:R_0603 | R10, R29 |
| 2 | BAT54S | MyFootprints:SOT-23 | D2, D3 |
| 1 | 10k | MyResistors:Potentiometer_Tri5x5 | RV1 |
| 1 | 10u | MyMagnetics:L_1206 | L1 |
| 1 | 20k | MyResistors:R_0603 | R8 |
| 1 | 3k6 | MyResistors:R_0603 | R5 |
| 1 | 470 | MyResistors:R_0603 | R30 |
| 1 | 620 | MyResistors:R_0603 | R4 |
| 1 | 68k | MyResistors:R_0603 | R11 |
| 1 | 6k8 | MyResistors:R_0603 | R6 |
| 1 | 910 | MyResistors:R_0603 | R31 |
| 1 | AP1117 | MyFootprints:SOT-223 | U1 |
| 1 | AP1117D33 | MyFootprints:SOT-223 | U3 |
| 1 | AP1117D50 | MyFootprints:SOT-223 | U2 |
| 1 | ATXMEGA256A3-A | MyFootprints:TQFP-64_14x14mm_Pitch0.8mm | IC1 |
| 1 | BUZZER | MyFootprints:PiezoBuzzer_17mm_SMD | P6 |
| 1 | BZX384-C3V6 | MyDiodes:SOD-323 | D1 |
| 1 | CURRENT_SENS | MyConnectors:PinHeaderMale_2x03 | P17 |
| 1 | DEBUG | MyConnectors:PinHeader_1x04 | P5 |
| 1 | DISPLAY | MyConnectors:PinHeaderMale_2x06 | P13 |
| 1 | DSX321SH | MyFootprints:Crystal-3225 | Y1 |
| 1 | ESP-12E | MyFootprints:ESP-12E | P3 |
| 1 | EXPANSION | MyConnectors:PinHeaderMale_2x04 | P7 |
| 1 | FAN1 | MyConnectors:PinHeader_1x04 | P8 |
| 1 | FAN2 | MyConnectors:PinHeader_1x04 | P9 |
| 1 | INVERTER | MyConnectors:PinHeaderMale_2x08 | P12 |
| 1 | INV_EN | MyConnectors:PinHeader_1x03 | P14 |
| 1 | ISP | MyConnectors:PinHeaderMale_2x03 | P4 |
| 1 | KEYBOARD | MyConnectors:PinHeaderMale_2x04 | P11 |
| 1 | MicroSD | MyConnectors:MicroSD | P10 |
| 1 | PWR_IN | MyConnectors:PinHeader_1x03 | P1 |
| 1 | PWR_OUT1 | MyConnectors:PinHeaderMale_2x03 | P2 |
| 1 | TEMP1 | MyConnectors:PinHeader_1x03 | P15 |
| 1 | TEMP2 | MyConnectors:PinHeader_1x03 | P16 |
| 1 | TL431DBZ | MyFootprints:SOT-23 | U4 |
The 93 most common of 100 parts.
Questions
How big is the TeslaController PCB?
It measures 71 × 95 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TeslaController use?
100 parts, built around the ATXMEGA256A3-AU, ESP-12E, AP1117DG and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TeslaController KiCad files?
From the kavionic/TeslaDriver repository on GitHub, at the commit this page was made from: the board is Schematics/TeslaController/TeslaController.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TeslaController design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from kavionic/TeslaDriver
8- 2 layers64 × 92 mm
DualGateDriverPanel
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
148 parts2GPL-3.0 - 2 layers100 × 100 mm
TeslaDriver
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
118 parts2GPL-3.0 - 2 layers46 × 37 mm
QuadGateDriver
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
95 parts2GPL-3.0 - 2 layers80 × 100 mm
TeslaDriver
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
83 parts2GPL-3.0 - 2 layers80 × 100 mm
TeslaDriverHP
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
68 parts2GPL-3.0 - 2 layers64 × 23 mm
DualGateDriver
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
37 parts2GPL-3.0 - 2 layers25 × 23 mm
GateDriver
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
23 parts2GPL-3.0
Similar boards
- 2 layers100 × 100 mm
- 2 layers29 × 40 mm
ESP8266-12 breakout
timelab/ADEM
Mobile device for distributed measurements of particulate matter (fine dust)
19 parts13LGPL-3.0 - 2 layers52.1 × 29.8 mm
Irremote
takigama/HomeAutomationExperiments
Some of my home automation experiments involving arduino, esp, lights and other things
34 parts11 - 2 layers55 × 45.6 mm
- 4 layers100 × 74 mm
Beaglelogic standalone
abhishek-kakkar/beaglelogic-standalone
BeagleLogic implemented as a turnkey and standalone logic analyzer
260 parts15 - 2 layers46.5 × 36.6 mm
Partycat
lukecyca/partycat
ESP8266 + WS2812 controller: https://talk.vanhack.ca/t/esp8266-ws2812-partycat-controller/5129
19 parts10 - 2 layers87.5 × 95.5 mm
- 2 layers68.1 × 49.8 mm
Vwcdpic with BT
tomaskovacik/vwcdpic
This is my personal fork of k9spud vwcdpic project
102 parts29GPL-2.0