2 layers100 × 92 mm
GateDriverPanel
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
368 parts2GPL-3.0
2 layers46 × 37 mm
QuadGateDriver
kavionic/TeslaDriver2Firmware, support software, and CAD files for my tesla coil project.
- Size
- 46 × 37 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 95
- Nets
- 38
- Pads
- 234
- Tracks, vias
- 892, 67
- Pours
- 36
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 21 Jun 2016
- Updated
- 5 Mar 2017
Overview
QuadGateDriver is an open-source printed circuit board by kavionic, from the kavionic/TeslaDriver repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 46 × 37 mm with 95 parts on 38 nets, routed with 892 tracks and 67 vias.
It is built around the NXE2S1212MC-R7, DS18B20 and SMA6F12A. Its parts include 26 capacitors, 22 resistors, 10 ICs, 9 diodes and 6 connectors.
Main components
3
NXE2S1212MC-R7
SMD-5P,12.7x10.4mm-40℃~+85℃ 10.8V~13.2V 10uF 115kHz 12.7mm 12V 167mA 2W 3kV 55mVp-p 76.5% Short Circuit Protection SMD-5P,12.7x10.4mm Isolated Power Modules ROHSMurataIsolated Power Modules
DS18B20
TO-92-55℃~+125℃ 12bit 3V~5.5V 750ms Single-bus ±0.4℃ TO-92 Temperature Sensors ROHSUMWTemperature Sensors
SMA6F12A
SMA-flat-55℃~+175℃ 12V 13.3V 19.9V 200nA 31A 4kW@8/20us IEC 61000-4-2、IEC 61000-4-4 TVS Unidirectional SMA-flat ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsTVS
Parts
95| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 100n | MyCapacitors:C_0603 | C2, C3, C4, C5, C9, C11, C12, C13, C16, C19, C20, C21, C23, C24, C25, C26 |
| 8 | 3R9 | MyResistors:R_1206 | R5, R8, R9, R10, R12, R14, R15, R17 |
| 5 | 4k7 | MyResistors:R_0603 | R7, R18, R19, R20, R21 |
| 4 | 10u | MyCapacitors:C_1206 | C10, C14, C17, C22 |
| 4 | 2R | MyResistors:R_1206 | R1, R2, R3, R4 |
| 4 | DS18B20 | MyFootprints:TO-92_Inline_Narrow_Oval | U7, U8, U9, U10 |
| 4 | DZ2J130M0L | MyDiodes:SMini2-F5-B | D3, D4, D6, D8 |
| 4 | NP | MyResistors:R_0603 | R6, R11, R13, R16 |
| 4 | NP | MyCapacitors:C_0603 | C7, C8, C15, C18 |
| 4 | NXE2S1212MC | MyFootprints:NXE2_DCDC | U2, U3, U5, U6 |
| 4 | SMA6F12A | MyDiodes:DO-221AC | D1, D2, D5, D7 |
| 2 | 1u | MyCapacitors:C_0603 | C1, C6 |
| 2 | IN1G | MyConnectors:TestPoint06 | W12, W14 |
| 2 | IN2G | MyConnectors:TestPoint06 | W8, W10 |
| 2 | SI8233 | MyFootprints:SOIC-16_7.5x10.3mm_Pitch1.27mm | U1, U4 |
| 1 | 180 | MyResistors:R_0603 | R22 |
| 1 | 1HD | MyConnectors:TestPoint06 | W17 |
| 1 | 1HG | MyConnectors:TestPoint06 | W16 |
| 1 | 1HS | MyConnectors:TestPoint06 | W15 |
| 1 | 1LD | MyConnectors:TestPoint06 | W20 |
| 1 | 1LG | MyConnectors:TestPoint06 | W19 |
| 1 | 1LS | MyConnectors:TestPoint06 | W18 |
| 1 | 2HD | MyConnectors:TestPoint06 | W3 |
| 1 | 2HG | MyConnectors:TestPoint06 | W2 |
| 1 | 2HS | MyConnectors:TestPoint06 | W1 |
| 1 | 2LD | MyConnectors:TestPoint06 | W6 |
| 1 | 2LG | MyConnectors:TestPoint06 | W5 |
| 1 | 2LS | MyConnectors:TestPoint06 | W4 |
| 1 | CN | MyConnectors:TestPoint | W21 |
| 1 | CONTROL | MyConnectors:PinHeaderMale_2x10 | P4 |
| 1 | CP | MyConnectors:TestPoint | W22 |
| 1 | CUR_SENS | MyConnectors:PinHeader_1x02 | P1 |
| 1 | GDriver1H | MyConnectors:SimpleGateDriverOut | P5 |
| 1 | GDriver1L | MyConnectors:SimpleGateDriverOut | P6 |
| 1 | GDriver2H | MyConnectors:SimpleGateDriverOut | P2 |
| 1 | GDriver2L | MyConnectors:SimpleGateDriverOut | P3 |
| 1 | IN1H | MyConnectors:TestPoint06 | W11 |
| 1 | IN1L | MyConnectors:TestPoint06 | W13 |
| 1 | IN2H | MyConnectors:TestPoint06 | W7 |
| 1 | IN2L | MyConnectors:TestPoint06 | W9 |
| 1 | LED 0805 GREEN | MyDiodes:LED_0805 | D9 |
Questions
How big is the QuadGateDriver PCB?
It measures 46 × 37 mm and has 2 copper layers, 1.6 mm thick.
What parts does the QuadGateDriver use?
95 parts, built around the NXE2S1212MC-R7, DS18B20 and SMA6F12A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the QuadGateDriver KiCad files?
From the kavionic/TeslaDriver repository on GitHub, at the commit this page was made from: the board is Schematics/TeslaDriverHP2/QuadGateDriver_R1/QuadGateDriver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the QuadGateDriver design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from kavionic/TeslaDriver
8- 2 layers64 × 92 mm
DualGateDriverPanel
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
148 parts2GPL-3.0 - 2 layers100 × 100 mm
TeslaDriver
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
118 parts2GPL-3.0 - 2 layers71 × 95 mm
TeslaController
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
100 parts2GPL-3.0 - 2 layers80 × 100 mm
TeslaDriver
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
83 parts2GPL-3.0 - 2 layers80 × 100 mm
TeslaDriverHP
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
68 parts2GPL-3.0 - 2 layers64 × 23 mm
DualGateDriver
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
37 parts2GPL-3.0 - 2 layers25 × 23 mm
GateDriver
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
23 parts2GPL-3.0
Similar boards
- 2 layers33.7 × 97.8 mm
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 2 layers121 × 68 mm
Freeds sanchez
pablozg/freeds
Derivador de energía solar excedente creado por Pablo Zerón, Diseño PCB por Amcalo, Tester original por Aeizoon, Wiki por Zoilo Mora
42 parts108 - 2 layers80 × 54.9 mm
ESP32WifiAisTempVolt2
AK-Homberger/NMEA2000WifiGateway-with-ESP32
This repository shows how to build a NMEA2000 WiFi Gateway with voltage and temperature alarms.
18 parts94GPL-3.0 - 2 layers52 × 61 mm
Arduino motorfocus
fehlfarbe/arduino-motorfocus
Arduino motorfocus with moonlite protocol for telescopes
23 parts58MIT - 2 layers69 × 57 mm
- 2 layers26 × 34.8 mm
- 2 layers162 × 60 mm
Esp shield
felixwittwer/homeassistant_automaic_greenhouse
A cool Project to make your greenhouse smart. What about automaic irrigation and collecting enviromental data right from your garden.
20 parts27 - 2 layers123 × 87.5 mm
FastLOGIC
Neumi/fastLOGIC
An affordable Arduino-based board designed for straightforward (industrial) logic control, ideal for building small-scale automation and control solutions.
180 parts23MIT