
GateDriverPanel
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.

Firmware, support software, and CAD files for my tesla coil project.
TeslaDriver is an open-source printed circuit board by kavionic, from the kavionic/TeslaDriver repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 100 mm with 118 parts on 19 nets, routed with 946 tracks and 452 vias.
It is built around the IRFP4310ZPBF and STPS30SM120SR. Its parts include 68 capacitors, 18 resistors, 16 connectors, 5 diodes and 4 transistors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | 2.2u/100V | MyCapacitors:C_1210 | C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25 +16 |
| 32 | 3n9/250V | MyCapacitors:C_0805 | C37, C38, C39, C40, C41, C42, C43, C44, C45, C46, C47, C48, C49, C50, C51, C52 +16 |
| 16 | 1 | MyResistors:R_2512 | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16 |
| 4 | 1000u/63V | MyCapacitors:C_Radial_D16_L25_P7.5 | C1, C2, C3, C4 |
| 4 | IRFP4310ZPbF | MyFootprints:TO-247 | Q1, Q2, Q3, Q4 |
| 4 | MountingHole | MyMechanical:MH7x3 | M1, M2, M3, M4 |
| 4 | STPS30SM120S | MyFootprints:TO-220 | D1, D2, D3, D4 |
| 2 | 4k7 | MyResistors:R_1206 | R17, R18 |
| 2 | CUR SENS | MyConnectors:PinHeader_1x02 | P14, P15 |
| 2 | HEATSINK | MyMechanical:Heatsink12Fin73x60x25 | HS1, HS2 |
| 2 | PWR_OUT_L2_A | MyConnectors:TermBlock6.35mm2P | P11, P12 |
| 1 | CUR_SENSE | MyConnectors:PinHeader_1x02 | P16 |
| 1 | CurrentTrans3P | MyMagnetics:CurrentTrans3P27x10 | T1 |
| 1 | GDriver1H | MyConnectors:SimpleGateDriver | P4 |
| 1 | GDriver1L | MyConnectors:SimpleGateDriver | P9 |
| 1 | GDriver2H | MyConnectors:SimpleGateDriver | P10 |
| 1 | GDriver2L | MyConnectors:SimpleGateDriver | P13 |
| 1 | OUTL_CTIN | MyConnectors:CurrentSensConnector | P6 |
| 1 | OUTL_CTOUT | MyConnectors:CurrentSensConnector | P7 |
| 1 | PWR | MyDiodes:LED_0805 | D5 |
| 1 | PWR_GND | MyConnectors:TermBlock6.35mm2P | P3 |
| 1 | PWR_IN+ | MyConnectors:TermBlock6.35mm2P | P1 |
| 1 | PWR_OUT_L1_A | MyConnectors:TermBlock6.35mm2P | P5 |
| 1 | PWR_OUT_L1_B | MyConnectors:TermBlock6.35mm2P | P8 |
| 1 | PWR_S | MyConnectors:TermBlock6.35mm2P | P2 |

kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.

kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.

kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.

kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.

kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.

kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.

kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.

kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.

Testato/ADB-3020-CDV
CDV (Community Digital Version) of the switching power supply ADB-3020


TweetyDaBird/Lotus-58-Classic
A split ergo linear keyboard derived from the Lily58 family

ZeroPhone/ZeroPhone-PCBs
PCB files for ZeroPhone - for gerbers and schematics, go to "Releases" tab!

BerkeleyHCI/PolymorphicBlocks
A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.


OPRobots/FujitoraBot
Robotracer - siguelíneas de alto rendimiento; con succión, tracción brushless en sistema tetra y procesador STM32F4

richardeoin/ax
This repository contains hardware and software for the AX5043 and AX5243 radios from AxSemi (now ON Semiconductor). They are probably the same die, but the AX5243 has fewer pins.
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
118 parts, built around the IRFP4310ZPBF and STPS30SM120SR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the kavionic/TeslaDriver repository on GitHub, at the commit this page was made from: the board is Schematics/TeslaDriverHP2/TeslaDriver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).