4 layers100 × 74 mm
Beaglelogic standalone
abhishek-kakkar/beaglelogic-standalone
BeagleLogic implemented as a turnkey and standalone logic analyzer
260 parts15
2 layers46.5 × 36.6 mm
Partycat
lukecyca/partycat10ESP8266 + WS2812 controller: https://talk.vanhack.ca/t/esp8266-ws2812-partycat-controller/5129
- Size
- 46.5 × 36.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 19
- Pads
- 72
- Tracks, vias
- 190, 30
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Nov 2016
- Updated
- 30 Dec 2019
Overview
Partycat is an open-source printed circuit board by lukecyca, from the lukecyca/partycat repository on GitHub. It is a 2-layer board of 46.5 × 36.6 mm with 19 parts on 19 nets, routed with 190 tracks and 30 vias.
It is built around the AP1117DG and BSS138. Its parts include 6 resistors, 3 capacitors, 3 connectors, 2 ICs and 2 switches. It belongs with the lEDs and displays boards and the ESP8266 boards of this library.
Main components
2
AP1117DG
SOT-223-40℃~+125℃@(Tj) 1 1.4V@(1A) 18V 1A 70dB@(180Hz) Adjustable、Fixed Over Current Protection、Thermal shutdown Positive SOT-223-4 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
README
README.mdpartycat led controller
Partycat is a small ESP8266-based controller for WS2812 LED strips.
Features
- Level-shifted GPIO pins, including one for a WS2812 strip
- A footprint that lets you solder the end of the strip right to the board
- WS2812 is on the I2S port, so it can use DMA using this hack (or the Arduino-compatible version)
- Programming using a standard 6-pin FTDI cable (no onboard USB you wuss)
Illustration Credit: http://nedroid.com/2009/05/party-cat-full-series/
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistors_SMD:R_0603_HandSoldering | R1, R3, R4, R5 |
| 2 | SW_PUSH | Buttons_Switches_SMD:SW_SPST_PTS645 | SW1, SW2 |
| 1 | 330 | Resistors_SMD:R_0603_HandSoldering | R2 |
| 1 | 4.7k | Resistors_SMD:R_0603_HandSoldering | R6 |
| 1 | AP1117 | TO_SOT_Packages_SMD:SOT-223 | U1 |
| 1 | BSS138 | TO_SOT_Packages_SMD:SOT-23 | Q1 |
| 1 | CONN_01X02 | Terminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-2pol | P1 |
| 1 | CONN_01X03 | WS2812:WS2812_Strip | P2 |
| 1 | CONN_01X06 | Pin_Headers:Pin_Header_Straight_1x06 | FTDI |
| 1 | CONN_01X10 | Pin_Headers:Pin_Header_Straight_1x10 | P6 |
| 1 | CP | Capacitors_THT:CP_Radial_D5.0mm_P2.50mm | C3 |
| 1 | CP | Capacitors_THT:CP_Radial_D12.5mm_P5.00mm | C1 |
| 1 | C_Small | Capacitors_SMD:C_0603_HandSoldering | C2 |
| 1 | ESP-12 | ESP8266:ESP-07v2-smd | U2 |
| 1 | LED | LEDs:LED_0805 | D1 |
Questions
How big is the Partycat PCB?
It measures 46.5 × 36.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Partycat use?
19 parts, built around the AP1117DG and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Partycat KiCad files?
From the lukecyca/partycat repository on GitHub, at the commit this page was made from: the board is partycat.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Partycat design in my own project?
Its repository states no licence, so its author keeps all rights: ask lukecyca before reusing the design.
Similar boards
- 2 layers87.5 × 95.5 mm
- 2 layers100 × 100 mm
- 2 layers68.1 × 49.8 mm
Vwcdpic with BT
tomaskovacik/vwcdpic
This is my personal fork of k9spud vwcdpic project
102 parts29GPL-2.0 - 2 layers41.9 × 15.2 mm
- 2 layers29 × 40 mm
ESP8266-12 breakout
timelab/ADEM
Mobile device for distributed measurements of particulate matter (fine dust)
19 parts13LGPL-3.0 - 2 layers71 × 95 mm
TeslaController
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
100 parts2GPL-3.0 - 4 layers50.8 × 25.4 mm
