2 layers78.7 × 107.6 mm
2 layers48.9 × 106.7 mm
Warps v30
jonstapleton/mutable_eurorackEurorack modules
- Size
- 48.9 × 106.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 127
- Nets
- 85
- Pads
- 410
- Tracks, vias
- 969, 107
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 8 Mar 2023
- Updated
- 11 Jan 2023
Overview
Warps v30 is an open-source printed circuit board by jonstapleton, from the jonstapleton/mutable_eurorack repository on GitHub. It is a 2-layer board of 48.9 × 106.7 mm with 127 parts on 85 nets, routed with 969 tracks and 107 vias.
It is built around the STM32F405RGT6, MCP6004-E/P and TL072, with the LM1117-3.3, 1N5819HW and BAT54S among its other parts. Its parts include 45 capacitors, 43 resistors, 8 connectors, 6 ICs and 5 diodes. It belongs with the STM32 boards of this library.
Main components
8
STM32F405RGT6
LQFP-64(10x10)-40℃~+85℃ 1.8V~3.6V 12bit 12bit 168MHz 192KB 1MB 32 Bit 51 ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
MCP6004-E/P
PDIP-14-40℃~+125℃ 1.8V~6V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-14 Operational Amplifier ROHSMicrochip TechnologyOperational Amplifier
TL072
SOP-8-18V~18V 0℃~+70℃ 1.4mA 1.5nA 10V/us 10mV 2 2.5nA 3MHz 85dB SOP-8 Operational Amplifier ROHSGcoreOperational Amplifier
LM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorised
1N5819HW
SOD-123-65℃~+150℃ 1 Independent 1A 1mA@40V 25A 40V 450mV@1A SOD-123 Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes
BAT54S
SOT-231 Pair Series Connection 1V@100mA 200mA 2uA@25V 30V 600mA SOT-23 Schottky Diodes ROHSMDDSchottky Diodes
WP115VEGW
插件,D=3mm-40℃~+85℃ 20mA 2V、2.2V 30mcd、30mcd 3mm Round Lens 565nm、627nm 568nm、617nm 60° 62.5mW、75mW Frosted White Lens Red, Yellow Green 插件,D=3mm LED Indication - Discrete ROHSKingbrightLED Indication - Discrete
WP154A4SUREQBFZGC
插件,D=5mm50° Common Cathode 插件,D=5mm RGB LEDs ROHSKingbrightRGB LEDs
README
README.mdMutable Instruments' Eurorack Modules.
Forked from pichenettes' version and identical except:
- Eagle brd and sch files converted to XML (making possible import into KiCad)
- For some modules, KiCad versions have been added
I have updated this repo to reflect upstream changes, but I am no longer able to convert the Eagle files, so not all are available as XML.
- Blades: Dual multimode filter.
- Blinds: Quad VC-polarizer.
- Braids: Macro-oscillator.
- Branches: Dual Bernoulli gate.
- Clouds: Texture synthesizer.
- Ears: Contact microphone.
- Edges: Quad chiptune digital oscillator.
- Elements: Modal synthesizer.
- Frames: Keyframer/mixer.
- Grids: Topographic drum sequencer.
- Kinks: Utility module - rectifier, analog logic, S&H, noise.
- Links: Utility module - buffer, mixer.
- Marbles: Random sampler.
- Peaks: Dual trigger converter.
- Plaits: Macro oscillator.
- Rings: Resonator.
- Ripples: Liquid 2-pole BP, 2-pole LP and 4-pole LP filter.
- Shades: Triple attenuverter.
- Shelves: EQ filter.
- Stages: Segment generator.
- Streams: Dual dynamics gate.
- Tides: Tidal modulator.
- Veils: Quad VCA.
- Volts: +5V power module.
- Warps: Meta-modulator.
- Yarns: MIDI interface.
License
Code (AVR projects): GPL3.0.
Code (STM32F projects): MIT license.
Hardware: cc-by-sa-3.0
By: Emilie Gillet (emilie.o.gillet@gmail.com)
Guidelines for derivative works
Mutable Instruments is a registered trademark.
The name "Mutable Instruments" should not be used on any of the derivative works you create from these files.
We do not recommend you to keep the original name of the Mutable Instruments module for your derivative works.
For example, your 5U adaptation of Mutable Instruments Clouds can be called "Foobar Modular - Particle Generator".
Parts
127| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 100n | warps_v30:C0603 | C5, C13, C16, C17, C18, C20, C21, C24, C25, C28, C30, C31, C33, C34, C40, C42 +2 |
| 8 | PJ301_THONKICONN6 | warps_v30:WQP_PJ_301M6 | J1, J2, J3, J4, J5, J6, J7, J8 |
| 7 | 10u | warps_v30:PANASONIC_A | C23, C29, C32, C36, C37, C39, C43 |
| 6 | 18p | warps_v30:C0603 | C10, C11, C26, C35, C38, C41 |
| 4 | 100k | warps_v30:R0603 | R8, R9, R17, R18 |
| 4 | 200k | warps_v30:R0603 | R19, R20, R32, R35 |
| 4 | 36k | warps_v30:R0603 | R12, R13, R37, R38 |
| 4 | 4.7n | warps_v30:C0603 | C7, C8, C12, C14 |
| 4 | 47k | warps_v30:R0603 | R28, R30, R31, R33 |
| 4 | 47u | warps_v30:PANASONIC_D | C1, C2, C3, C4 |
| 4 | 6.8k | warps_v30:R0603 | R29, R34, R36, R39 |
| 4 | FIDUCIAL1X2 | warps_v30:FIDUCIAL-1X2 | F1, F2, F3, F4 |
| 4 | TEST-POINT3X5 | warps_v30:PAD.03X.05 | TP1, TP2, TP3, TP4 |
| 3 | warps_v30:0603 | L1, L2, L3 | |
| 3 | 100 | warps_v30:R0603 | R3, R4, R5 |
| 2 | warps_v30:EVQ-Q2 | SW1, SW2 | |
| 2 | 1.0k | warps_v30:R0603 | R42, R43 |
| 2 | 10k | warps_v30:R0603 | R2, R14 |
| 2 | 10kB | warps_v30:ALPS_POT_VERTICAL | R26, R27 |
| 2 | 10kB | warps_v30:ALPS_POT_VERTICAL_PS | R7, R23 |
| 2 | 120k | warps_v30:R0603 | R10, R11 |
| 2 | 180 | warps_v30:R0603 | R21, R22 |
| 2 | 1N5819HW | warps_v30:SOD123 | D1, D2 |
| 2 | 1u | warps_v30:C0603 | C15, C27 |
| 2 | 2.2k | warps_v30:R0603 | R24, R25 |
| 2 | 2.2u | warps_v30:C0805 | C19, C22 |
| 2 | 220p | warps_v30:C0603 | C44, C45 |
| 2 | 33k | warps_v30:R0603 | R15, R16 |
| 2 | DNP | warps_v30:R0603 | R40, R41 |
| 1 | warps_v30:1X06 | JP2 | |
| 1 | warps_v30:ROHS_BIG | U$2 | |
| 1 | warps_v30:TACTILE-PTH | SW3 | |
| 1 | 12.288MHz | warps_v30:HC49UP | Q2 |
| 1 | 4.7 | warps_v30:R1206 | R1 |
| 1 | 4.7k | warps_v30:R0603 | R6 |
| 1 | 8MHz | warps_v30:HC49UP | Q1 |
| 1 | BAT54S | warps_v30:SOT23 | D3 |
| 1 | LM1117-3.3 | warps_v30:TO252 | IC1 |
| 1 | LM4040B10 | warps_v30:DBZ_R-PDSO-G3 | IC2 |
| 1 | M05X2MINIJTAG | warps_v30:2X5-1.27 | JP1 |
| 1 | M05X2PTH | warps_v30:AVR_ICSP | JP3 |
| 1 | MCP6004 | warps_v30:SO14 | IC3 |
| 1 | STM32F405RGT6 | warps_v30:TQFP-10X10-64 | IC4 |
| 1 | TL072 | warps_v30:SO08 | IC6 |
| 1 | WM8731 | warps_v30:SSOP28 | IC5 |
| 1 | WP115VEGW | warps_v30:LED-BICOLOR-THROUGHHOLE | LED2 |
| 1 | WP154A4SUREQBFZG | warps_v30:LED-TRICOLOR-THROUGHHOLE | LED1 |
Questions
How big is the Warps v30 PCB?
It measures 48.9 × 106.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Warps v30 use?
127 parts, built around the STM32F405RGT6, MCP6004-E/P, TL072 and LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Warps v30 KiCad files?
From the jonstapleton/mutable_eurorack repository on GitHub, at the commit this page was made from: the board is warps/hardware_design/pcb/KiCad/warps_v30.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Warps v30 design in my own project?
Its repository states no licence, so its author keeps all rights: ask jonstapleton before reusing the design.
More from jonstapleton/mutable_eurorack
12- 2 layers69.2 × 106.7 mm
- 2 layers97.8 × 102.9 mm
- 2 layers88.9 × 101.6 mm
- 2 layers58.7 × 107.6 mm
- 2 layers59.1 × 106.7 mm
- 2 layers69.2 × 106.7 mm
- 2 layers78.7 × 106.7 mm
- 2 layers59 × 106.7 mm
- 2 layers78.1 × 102.9 mm
- 2 layers19 × 108.4 mm
- 2 layers19 × 108.4 mm
Similar boards
- 2 layers69.2 × 106.7 mm
- 2 layers151.4 × 128.5 mm
- 2 layers171.5 × 106.7 mm
Sequencer
westlicht/performer-hardware
PER|FORMER Eurorack Sequencer - Hardware Design Files
435 parts110 - 4 layers154.9 × 128.4 mm
Daisy hardware v1
rafkhan/lowstepper
Dual phase manipulation low frequency oscillator by Okay Synthesizer.
161 parts9 - 4 layers127.4 × 141.4 mm
Authenticator2.0
Hypernova-Oy/emb-toveri
Weatherproof embedded user authenticator and authorizator device
54 partsGPL-3.0 - 2 layers25 × 25 mm
Sl25
TECHOTAKU182/Pilot-Light
本版与 ../../enclosure/sl25trafficrevb/ 外壳配套，取代 Rev A 的偏上小灯珠设计。PCB 正面只有一颗位于几何中心的 WS2812B-V5，其他电子元件和 USB-C 均在背面。 板框仍为 25×25 mm，双层、1.6 mm 厚，两个 M2 孔的位置保持原接口。
24 parts1 - 4 layers65 × 90 mm
ROSE PILK v1
Thornbots/Electrical
Here is where we store all relevant files for the Electrical team. In here you will store all of the KiCad files that you produce through out the year.
51 parts - 2 layers101.3 × 108.5 mm
