

Yarns v03
Eurorack modules
- Size
- 59 × 106.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 118
- Nets
- 107
- Pads
- 423
- Tracks, vias
- 1,057, 133
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 8 Mar 2023
- Updated
- 11 Jan 2023
Overview
Yarns v03 is an open-source printed circuit board by jonstapleton, from the jonstapleton/mutable_eurorack repository on GitHub. It is a 2-layer board of 59 × 106.7 mm with 118 parts on 107 nets, routed with 1,057 tracks and 133 vias.
It is built around the STM32F103CBT6, 74AHCT1G125DBV and OPA4171AID, with the REF02DPZ, 74HC595D and LM1117-3.3 among its other parts. Its parts include 43 resistors, 27 capacitors, 11 ICs, 8 connectors and 7 diodes. It belongs with the STM32 boards of this library.
Main components
10STM32F103CBT6
LQFP-48(7x7)-40℃~+85℃ 128KB 12bit 20KB 2V~3.6V 32 Bit 37 72MHz ARM Cortex-M3 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)74AHCT1G125DBV
SOT-23-5-40℃~+125℃ 1 1 10uA 4.5V~5.5V 5.5ns@5V,15pF 74AHCT 8mA 8mA Tri-State Unidirectional SOT-23-5 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversOPA4171AID
SOIC-14-18V~-1.35V、1.35V~18V -40℃~+125℃ 1.8mV 120dB 14nV/√Hz@1kHz 15pA 2.7V~36V 25mA 2uV/℃ 3MHz 4 475uA 4pA 6V/us ESD protection、EMI filtering/RF suppression Rail-to-rail output SOP-14 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierREF02DPZ
PDIP-80℃~+70℃@(Ta) 10mA 250ppm/℃ 2mA 5V 7V~40V Built-in temperature sensor Fixed Series ±2% PDIP-8 Voltage Reference ROHSAnalog DevicesVoltage Reference74HC595D
SOP-16-40℃~+105℃ 1 100MHz 15ns@6V,50pF 2V~6V 74HC 8 Asynchronous clear function、Output enable Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSJSMSEMIShift RegistersLM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorised1N5819HW
SOD-123-65℃~+150℃ 1 Independent 1A 1mA@40V 25A 40V 450mV@1A SOD-123 Schottky Diodes ROHSDiodes IncorporatedSchottky DiodesMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)6N137SMT/R
SOP-8-6.6mm-2.54mmSOP-8-6.6mm-2.54mm Logic Output Optoisolators ROHSIsocom ComponentsLogic Output OptoisolatorsD6R40F2LFS
插件插件 Pushbutton Switches ROHSC&KPush Switches
README
README.mdMutable Instruments' Eurorack Modules.
Forked from pichenettes' version and identical except:
- Eagle brd and sch files converted to XML (making possible import into KiCad)
- For some modules, KiCad versions have been added
I have updated this repo to reflect upstream changes, but I am no longer able to convert the Eagle files, so not all are available as XML.
- Blades: Dual multimode filter.
- Blinds: Quad VC-polarizer.
- Braids: Macro-oscillator.
- Branches: Dual Bernoulli gate.
- Clouds: Texture synthesizer.
- Ears: Contact microphone.
- Edges: Quad chiptune digital oscillator.
- Elements: Modal synthesizer.
- Frames: Keyframer/mixer.
- Grids: Topographic drum sequencer.
- Kinks: Utility module - rectifier, analog logic, S&H, noise.
- Links: Utility module - buffer, mixer.
- Marbles: Random sampler.
- Peaks: Dual trigger converter.
- Plaits: Macro oscillator.
- Rings: Resonator.
- Ripples: Liquid 2-pole BP, 2-pole LP and 4-pole LP filter.
- Shades: Triple attenuverter.
- Shelves: EQ filter.
- Stages: Segment generator.
- Streams: Dual dynamics gate.
- Tides: Tidal modulator.
- Veils: Quad VCA.
- Volts: +5V power module.
- Warps: Meta-modulator.
- Yarns: MIDI interface.
License
Code (AVR projects): GPL3.0.
Code (STM32F projects): MIT license.
Hardware: cc-by-sa-3.0
By: Emilie Gillet (emilie.o.gillet@gmail.com)
Guidelines for derivative works
Mutable Instruments is a registered trademark.
The name "Mutable Instruments" should not be used on any of the derivative works you create from these files.
We do not recommend you to keep the original name of the Mutable Instruments module for your derivative works.
For example, your 5U adaptation of Mutable Instruments Clouds can be called "Foobar Modular - Particle Generator".
Parts
118| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 100 | yarns_v03:R0603 | R2, R3, R4, R5, R6, R10, R11, R12, R13, R14, R15, R16, R33, R36, R41, R42 +2 |
| 13 | 100n | yarns_v03:C0603 | C2, C5, C6, C8, C9, C11, C13, C18, C19, C20, C23, C24, C27 |
| 10 | 1.0k | yarns_v03:R0603 | R1, R9, R24, R25, R30, R31, R32, R34, R38, R43 |
| 8 | PJ301WQP | yarns_v03:WQP_PJ_301BM | J1, J2, J3, J4, J5, J6, J7, J8 |
| 6 | 18p | yarns_v03:C0603 | C7, C10, C14, C16, C21, C22 |
| 6 | 47k | yarns_v03:R0603 | R18, R19, R20, R21, R22, R23 |
| 4 | yarns_v03:LED3MM | LED1, LED2, LED3, LED4 | |
| 4 | 240k | yarns_v03:R0603 | R26, R27, R28, R29 |
| 4 | 74AHCT1G125DBV | yarns_v03:SOT23-5 | IC7, IC8, IC10, IC11 |
| 4 | FIDUCIAL1X2 | yarns_v03:FIDUCIAL-1X2 | F1, F3, F5, F6 |
| 3 | yarns_v03:3,0 | U$2, U$3, U$4 | |
| 2 | 10k | yarns_v03:R0603 | R17, R37 |
| 2 | 10u | yarns_v03:PANASONIC_A | C3, C12 |
| 2 | 1N5819HW | yarns_v03:SOD123 | D1, D2 |
| 2 | 1u | yarns_v03:C0603 | C25, C26 |
| 2 | 22u | yarns_v03:PANASONIC_C | C1, C4 |
| 2 | 51 | yarns_v03:R0603 | R39, R40 |
| 2 | 74HC595D | yarns_v03:SO16 | IC2, IC3 |
| 2 | CUI-SD-50BV | yarns_v03:SD-50BV | X1, X2 |
| 2 | D6R | yarns_v03:D6R | SW3, SW4 |
| 2 | MMBT3904 | yarns_v03:SOT23-BEC | Q1, Q2 |
| 1 | yarns_v03:2X5-1.27 | JP4 | |
| 1 | yarns_v03:ROHS | U$5 | |
| 1 | 1N4148 | yarns_v03:SOD323-W | D3 |
| 1 | 220 | yarns_v03:R0603 | R35 |
| 1 | 220n | yarns_v03:C0603 | C17 |
| 1 | 3.3u | yarns_v03:C0603 | C15 |
| 1 | 6N137SMT | yarns_v03:DIL8-SMD | OK1 |
| 1 | 8MHz | yarns_v03:HC49UP | Q3 |
| 1 | D6R40F2LFS | yarns_v03:D6R | SW2 |
| 1 | DAC8564 | yarns_v03:SOP65P640X110-16N | IC4 |
| 1 | EC12E_SW | yarns_v03:ALPS_EC12E_SW | SW1 |
| 1 | KINGBRIGHT-PDC54-11 | yarns_v03:PDC54 | DISP1 |
| 1 | LM1117-3.3 | yarns_v03:SOT223 | IC1 |
| 1 | M05X2PTH | yarns_v03:AVR_ICSP | JP2 |
| 1 | MCP1703CB | yarns_v03:SOT23 | IC9 |
| 1 | OPA4171 | yarns_v03:SO14 | IC6 |
| 1 | REF02D | yarns_v03:SO08 | IC5 |
| 1 | STM32F103CBT6 | yarns_v03:LQFP48 | UC1 |
More from jonstapleton/mutable_eurorack
12- 2 layers78.7 × 107.6 mm

- 2 layers69.2 × 106.7 mm

- 2 layers97.8 × 102.9 mm

- 2 layers88.9 × 101.6 mm

- 2 layers58.7 × 107.6 mm

- 2 layers59.1 × 106.7 mm

- 2 layers69.2 × 106.7 mm

- 2 layers48.9 × 106.7 mm

- 2 layers78.7 × 106.7 mm

- 2 layers78.1 × 102.9 mm

- 2 layers19 × 108.4 mm

- 2 layers19 × 108.4 mm

Similar boards
- 2 layers88.9 × 106 mm

- 2 layers100 × 28.6 mm

- 2 layers171.5 × 106.7 mm

Sequencer
westlicht/performer-hardware
PER|FORMER Eurorack Sequencer - Hardware Design Files
435 parts110 - 2 layers57.3 × 105 mm

- 2 layers99 × 128.5 mm

- 4 layers202.5 × 110 mm

- 2 layers100 × 100 mm

Mist1010
UzixLS/mist1010-board
10x10cm PCB variant of MIST FPGA project for G738/G706 enclosure
273 parts43MIT - 2 layers170 × 64 mm

Questions
How big is the Yarns v03 PCB?
It measures 59 × 106.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Yarns v03 use?
118 parts, built around the STM32F103CBT6, 74AHCT1G125DBV, OPA4171AID and REF02DPZ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Yarns v03 KiCad files?
From the jonstapleton/mutable_eurorack repository on GitHub, at the commit this page was made from: the board is yarns/hardware_design/pcb/KiCad/yarns_v03.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Yarns v03 design in my own project?
Its repository states no licence, so its author keeps all rights: ask jonstapleton before reusing the design.