2 layers78.7 × 107.6 mm
2 layers97.8 × 102.9 mm
Edges v20
jonstapleton/mutable_eurorackEurorack modules
- Size
- 97.8 × 102.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 179
- Nets
- 118
- Pads
- 560
- Tracks, vias
- 1,308, 174
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 8 Mar 2023
- Updated
- 11 Jan 2023
Overview
Edges v20 is an open-source printed circuit board by jonstapleton, from the jonstapleton/mutable_eurorack repository on GitHub. It is a 2-layer board of 97.8 × 102.9 mm with 179 parts on 118 nets, routed with 1,308 tracks and 174 vias.
It is built around the ATXMEGA32A4U-AU, 74AHC1G125DBV and MCP6002-I/P, with the MCP3208-BI/P, MCP4822-E/P and LM1117-3.3 among its other parts. Its parts include 74 resistors, 45 capacitors, 20 connectors, 16 ICs and 7 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
9
ATXMEGA32A4U-AU
TQFP-44(10x10)-40℃~+85℃ 1.6V~3.6V 12bit 12bit 1KB 32KB 32MHz 34 4KB 8/16 Bit AVR Built-in FLASH TQFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
74AHC1G125DBV
SOT-23-5-40℃~+125℃ 1 1 10uA 2V~5.5V 74AHC 8mA 8mA 9.5ns@5V,50pF Output enable、Level shifting Tri-State Unidirectional SOT-23-5 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffer/Driver/Transceiver
MCP6002-I/P
PDIP-8-40℃~+85℃ 1.8V~6V 100uA 1MHz 1pA 1pA 2 23mA 28nV/√Hz@1kHz 2uV/℃ 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-8 Operational Amplifier ROHSMicrochip TechnologyOperational Amplifier
MCP3208-BI/P
PDIP-16-40℃~+85℃ 0.5LSB 100kHz 12 1LSB 1MHz、2MHz 2.7V~5.5V 500nA 8 External External Multiplexers、Bipolar input Not supported SAR SPI Yes PDIP-16 Analog to Digital Converters (ADC) ROHSMicrochip TechnologyAnalog To Digital Converters (ADC)MCP4822-E/P
PDIP-8-40℃~+125℃ 12 12LSB 2 2.7V~5.5V 20MHz 4.5us 415uA 50ppm/℃ Built-in Built-in SPI Voltage Buffer PDIP-8 Digital to Analog Converters (DAC) ROHSMicrochip TechnologyDigital To Analog Converters (DAC)
LM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorised
LM4040B25FTA
SOT-23-40℃~+125℃ 100ppm/℃ 15mA 2.5V 35uVrms 60uA Fixed Parallel ±0.2% SOT-23 Voltage Reference ROHSDiodes IncorporatedVoltage ReferenceMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
1N5819HW
SOD-123-65℃~+150℃ 1 Independent 1A 1mA@40V 25A 40V 450mV@1A SOD-123 Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes
README
README.mdMutable Instruments' Eurorack Modules.
Forked from pichenettes' version and identical except:
- Eagle brd and sch files converted to XML (making possible import into KiCad)
- For some modules, KiCad versions have been added
I have updated this repo to reflect upstream changes, but I am no longer able to convert the Eagle files, so not all are available as XML.
- Blades: Dual multimode filter.
- Blinds: Quad VC-polarizer.
- Braids: Macro-oscillator.
- Branches: Dual Bernoulli gate.
- Clouds: Texture synthesizer.
- Ears: Contact microphone.
- Edges: Quad chiptune digital oscillator.
- Elements: Modal synthesizer.
- Frames: Keyframer/mixer.
- Grids: Topographic drum sequencer.
- Kinks: Utility module - rectifier, analog logic, S&H, noise.
- Links: Utility module - buffer, mixer.
- Marbles: Random sampler.
- Peaks: Dual trigger converter.
- Plaits: Macro oscillator.
- Rings: Resonator.
- Ripples: Liquid 2-pole BP, 2-pole LP and 4-pole LP filter.
- Shades: Triple attenuverter.
- Shelves: EQ filter.
- Stages: Segment generator.
- Streams: Dual dynamics gate.
- Tides: Tidal modulator.
- Veils: Quad VCA.
- Volts: +5V power module.
- Warps: Meta-modulator.
- Yarns: MIDI interface.
License
Code (AVR projects): GPL3.0.
Code (STM32F projects): MIT license.
Hardware: cc-by-sa-3.0
By: Emilie Gillet (emilie.o.gillet@gmail.com)
Guidelines for derivative works
Mutable Instruments is a registered trademark.
The name "Mutable Instruments" should not be used on any of the derivative works you create from these files.
We do not recommend you to keep the original name of the Mutable Instruments module for your derivative works.
For example, your 5U adaptation of Mutable Instruments Clouds can be called "Foobar Modular - Particle Generator".
Parts
179| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 100n | edges_v20:C0603 | C3, C11, C13, C14, C15, C20, C21, C22, C24, C27, C30, C34, C36, C37, C40, C41 +4 |
| 17 | 100k | edges_v20:R0603 | R14, R21, R22, R24, R29, R30, R34, R36, R37, R38, R40, R50, R56, R57, R59, R66 +1 |
| 17 | PJ301_THONKICONN6 | edges_v20:WQP_PJ_301M6 | J1, J2, J3, J4, J5, J6, J7, J8, J10, J11, J12, J13, J14, J15, J16, J17 +1 |
| 12 | 200k | edges_v20:R0603 | R16, R19, R25, R26, R27, R28, R51, R55, R61, R63, R64, R65 |
| 9 | 10k | edges_v20:R0603 | R2, R9, R10, R15, R18, R45, R46, R53, R60 |
| 8 | 100p | edges_v20:C0603 | C4, C6, C10, C12, C23, C26, C29, C31 |
| 8 | 10kB | edges_v20:ALPS_POT_VERTICAL_PS | R4, R5, R31, R32, R41, R42, R68, R69 |
| 8 | 24.9k | edges_v20:R0603 | R8, R12, R17, R23, R44, R47, R52, R58 |
| 7 | 1k | edges_v20:R0603 | R6, R7, R20, R33, R43, R49, R62 |
| 4 | edges_v20:TACTILE-PTH | SW4, SW5, SW6, SW7 | |
| 4 | edges_v20:LED3MM | LED1, LED2, LED3, LED4 | |
| 4 | 100 | edges_v20:R0603 | R71, R72, R73, R74 |
| 4 | 10u | edges_v20:PANASONIC_B | C8, C9, C25, C28 |
| 4 | 18p | edges_v20:C0603 | C16, C17, C42, C44 |
| 4 | 33k | edges_v20:R0603 | R11, R13, R35, R48 |
| 4 | 47u | edges_v20:PANASONIC_D | C18, C19, C38, C39 |
| 4 | FIDUCIAL1X2 | edges_v20:FIDUCIAL-1X2 | JP1, JP2, JP3, JP4 |
| 4 | MCP6002 | edges_v20:SO08 | IC3, IC4, IC10, IC12 |
| 4 | MMBT3904 | edges_v20:SOT23-BEC | Q1, Q2, Q3, Q4 |
| 3 | edges_v20:ES_100SP1T6B11M2QEH_SMALL | SW1, SW2, SW3 | |
| 3 | 1N5819HW | edges_v20:SOD123 | D1, D2, D3 |
| 3 | 470n | edges_v20:C0603 | C1, C2, C32 |
| 3 | TL072D | edges_v20:SO08 | IC2, IC7, IC9 |
| 2 | edges_v20:2X3 | J18, J20 | |
| 2 | 1u | edges_v20:C0603 | C33, C35 |
| 2 | 39k | edges_v20:R0603 | R39, R70 |
| 2 | 74AHC1G86DBV | edges_v20:SOT23-5 | IC6, IC8 |
| 1 | edges_v20:0603 | L1 | |
| 1 | 2k | edges_v20:R0603 | R1 |
| 1 | 300 | edges_v20:R0603 | R3 |
| 1 | 74AHC1G125DBV | edges_v20:SOT23-5 | IC5 |
| 1 | 82k | edges_v20:R0603 | R54 |
| 1 | 8MHz | edges_v20:HC49U70 | Q5 |
| 1 | ATXMEGA32A4U-AU | edges_v20:TQFP44 | IC16 |
| 1 | LM1117-3.3 | edges_v20:SOT223 | IC14 |
| 1 | LM4040 10V | edges_v20:DBZ_R-PDSO-G3 | IC1 |
| 1 | LM4040B25 | edges_v20:DBZ_R-PDSO-G3 | IC11 |
| 1 | M05X2PTH | edges_v20:AVR_ICSP | J19 |
| 1 | MCP3208 | edges_v20:SO16 | IC13 |
| 1 | MCP4822 | edges_v20:SO08 | IC15 |
More from jonstapleton/mutable_eurorack
12- 2 layers69.2 × 106.7 mm
- 2 layers88.9 × 101.6 mm
- 2 layers58.7 × 107.6 mm
- 2 layers59.1 × 106.7 mm
- 2 layers69.2 × 106.7 mm
- 2 layers48.9 × 106.7 mm
- 2 layers78.7 × 106.7 mm
- 2 layers59 × 106.7 mm
- 2 layers78.1 × 102.9 mm
- 2 layers19 × 108.4 mm
- 2 layers19 × 108.4 mm
Similar boards
- 2 layers38.7 × 106.7 mm
- 2 layers100 × 28.6 mm
- 4 layers59.2 × 106.4 mm
- 2 layers53 × 68 mm
In Board Gnia
MbFredys/PCB-designs-for-PLATZI-course
PCB design exercises completed during a structured training course, documenting schematic capture, layout, and manufacturing outputs.
99 parts1MIT - 2 layers60.3 × 128.3 mm
- 2 layers61 × 81 mm
- 2 layers65.5 × 65.5 mm
Adafruit adafruit particle spark neopixel ring pcb adafruit neoparticle24
oomlout/oomlout_oomp_project_bot_v_2
59 parts - 4 layers80 × 80 mm
Questions
How big is the Edges v20 PCB?
It measures 97.8 × 102.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Edges v20 use?
179 parts, built around the ATXMEGA32A4U-AU, 74AHC1G125DBV, MCP6002-I/P and MCP3208-BI/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Edges v20 KiCad files?
From the jonstapleton/mutable_eurorack repository on GitHub, at the commit this page was made from: the board is edges/hardware_design/pcb/KiCad/edges_v20.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Edges v20 design in my own project?
Its repository states no licence, so its author keeps all rights: ask jonstapleton before reusing the design.