Skip to the content
2 layers151.4 × 128.5 mmEnvelope generator, the printed circuit board in 3D

Analog3 envelope generator

Size
151.4 × 128.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
128
Nets
95
Pads
374
Tracks, vias
1,250, 194
Pours
269
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
30 Nov 2025
Updated
2 May 2026

Overview

Envelope generator is an open-source printed circuit board by naokiiwakami, from the naokiiwakami/envelope-generator repository on GitHub, published under the MIT licence. It is a 2-layer board of 151.4 × 128.5 mm with 128 parts on 95 nets, routed with 1,250 tracks and 194 vias.

It is built around the STM32G0B1CET6, TCAN3413D and MC34063AD, with the MCP6004-E/P, TL072 and CD4051BE among its other parts. Its parts include 41 resistors, 22 capacitors, 10 ICs, 10 connectors and 8 diodes. It belongs with the audio and music boards and the STM32 boards of this library.

Main components

12

Parts

128
QtyValueFootprintReferences
810kSynth:ALPHA_9MMRV1, RV2, RV3, RV4, RV5, RV6, RV7, RV8
636kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR5, R8, R25, R26, R34, R36
5180Resistor_SMD:R_0603_1608MetricR14, R15, R18, R27, R30
4100kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR9, R24, R28, R33
4100nCapacitor_SMD:C_0603_1608MetricC4, C5, C7, C16
3100nCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC11, C14, C20
3100uCapacitor_SMD:CP_Elec_6.3x5.4_NichiconC1, C2, C6
310kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR19, R20, R21
3330Resistor_SMD:R_0603_1608MetricR16, R17, R29
210kResistor_SMD:R_0603_1608MetricR40, R41
216kResistor_SMD:R_0603_1608MetricR6, R10
2180Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR38, R39
218kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR35, R37
21kResistor_SMD:R_0603_1608MetricR1, R13
21nCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC18, C19
227kResistor_SMD:R_0603_1608MetricR7, R11
2330pCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC21, C22
24.7nCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC10, C15
2470kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR22, R23
29pCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC12, C13
2LM4040DBZ-3.0Package_TO_SOT_SMD:SOT-23U4, U7
11.5Resistor_SMD:R_0603_1608MetricR2
110uCapacitor_SMD:C_0805_2012MetricC9
1128x64OLEDPanel_Utilities:128x64 OLED WindowSSD1306
1150pCapacitor_SMD:C_0603_1608MetricC3
115kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR32
116MHzCrystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mmY1
11N4148WSDiode_SMD:D_SOD-323D5
11uCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC8
12.0kResistor_SMD:R_0603_1608MetricR3
12.2uCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC17
12.7kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR4
1220uInductor_SMD:L_1210_3225MetricL1
13.3kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR31
13.3kResistor_SMD:R_0603_1608MetricR12
1Analog SRC 2Synth:LED_D3.0mmD10
1Analog SRC 1Synth:LED_D3.0mmD7
1CANConnector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_VerticalJ6
1CD4051BPackage_SO:TSSOP-16_4.4x5mm_P0.65mmU10
1CV 1 InSynth:ThonkiconnJ9
1CV 2 InSynth:ThonkiconnJ10
1Conn_01x03_SocketConnector_PinSocket_1.27mm:PinSocket_1x03_P1.27mm_VerticalJ3
1Dual or Voice 1 OutSynth:Thonkiconn_StereoJ2
1EG 2 OutSynth:ThonkiconnJ4
1Gate 1Synth:LED_D3.0mmD2
1Gate 1 InSynth:ThonkiconnJ5
1Gate 2Synth:LED_D3.0mmD3
1Gate 2 InSynth:ThonkiconnJ7
1LM393Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU8
1MC34063ADPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU2
1MCP6004Package_SO:SOIC-14_3.9x8.7mm_P1.27mmU3
1PEL12D-4225S-S2024PEL12D:TO_4225S-S2024U6
1Power busConnector_IDC:IDC-Header_2x05_P2.54mm_VerticalJ1
1RB521S30T1GDiode_SMD:D_SOD-523D1
1RESET_SWTactile_Switches:Panasonic_EVQ_Q2SW1
1SSD1306SSD1306:128x64OLED_akiBrd1
1STM32G0B1CET6Package_QFP:LQFP-48_7x7mm_P0.5mmU5
1SWDConnector_Synth:CONN_2x10_3220-10-0100-00_CNCJ8
1TCAN3413Package_TO_SOT_SMD:TSOT-23-8U9
1TL072Package_TO_SOT_SMD:SOT-23-8U1
1USER_SWTactile_Switches:SW4_1825910-B_TECSW3
1WP115VEGWSynth:LED-3.0mm-3D6
1XLMDKCBD34MSynth:LED-3.0mm-3D4

The 105 most common of 128 parts.

Similar boards

  • 2 layers69.2 × 106.7 mmRings v30, the printed circuit board in 3D

    Rings v30

    mort13/clandestine_circuitry

    Collection of diy synth projects

    148 parts12GPL-3.0
  • 2 layers69.2 × 106.7 mmTides v40, the printed circuit board in 3D

    Tides v40

    jonstapleton/mutable_eurorack

    Eurorack modules

    140 parts
  • 2 layers152.3 × 128.5 mmCv depot, the printed circuit board in 3D

    Cv depot

    naokiiwakami/cv-depot

    Source of control voltages for euro rack synth system

    206 parts1MIT
  • 4 layers100 × 60 mmT1conv, the printed circuit board in 3D

    T1conv

    ajefferies2/t1conv

    100BASE-T1 ↔ 100BASE-TX media converter + dual CAN FD/USB adapter on one board.

    125 parts
  • 2 layers50 × 50 mmCan proto, the printed circuit board in 3D

    Can proto

    fahrrad-camper/anhaenger

    232 parts
  • 4 layers65 × 55 mmGateway, the printed circuit board in 3D

    Gateway

    opensimgear/device-gateway

    Work-in-progress STM32 Cyphal/CAN-to-USB gateway with automatic input/output enrollment, ordered HID controllers, guarded configuration/leased action/event routing and native/Pico debug simulation.

    45 parts
  • 2 layers65 × 56 mmIndustrial hat rpi4, the printed circuit board in 3D

    Industrial hat rpi4

    V2gkr/industrial_hat_rpi4

    hat to communicate via rs232, rs485, can fd with galvanic isolation

    52 parts
  • 4 layers85 × 75 mmStarter, the printed circuit board in 3D

    Starter

    opensimgear/device-template

    Work-in-progress STM32G0B1 input/output module with USB HID or CDC-only profiles, Cyphal/CAN, persistent settings, ordered panel events, leased LED/display actions, KiCad hardware and native simulation.

    111 parts

Questions

How big is the Envelope generator PCB?

It measures 151.4 × 128.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Envelope generator use?

128 parts, built around the STM32G0B1CET6, TCAN3413D, MC34063AD and MCP6004-E/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Envelope generator KiCad files?

From the naokiiwakami/envelope-generator repository on GitHub, at the commit this page was made from: the board is hardware/envelope-generator.kicad_pcb and its schematic hardware/envelope-generator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Envelope generator design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).