2 layers78.7 × 107.6 mm
2 layers78.7 × 106.7 mm
Braids v50
jonstapleton/mutable_eurorackEurorack modules
- Size
- 78.7 × 106.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 120
- Nets
- 110
- Pads
- 461
- Tracks, vias
- 1,464, 230
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 8 Mar 2023
- Updated
- 11 Jan 2023
Overview
Braids v50 is an open-source printed circuit board by jonstapleton, from the jonstapleton/mutable_eurorack repository on GitHub. It is a 2-layer board of 78.7 × 106.7 mm with 120 parts on 110 nets, routed with 1,464 tracks and 230 vias.
It is built around the STM32F103CBT6, MCP3204-CI/P and MCP6004-E/P, with the TL072, 74HC595D and LM1117-3.3 among its other parts. Its parts include 56 resistors, 31 capacitors, 10 ICs, 6 transistors and 6 connectors. It belongs with the STM32 boards of this library.
Main components
9
STM32F103CBT6
LQFP-48(7x7)-40℃~+85℃ 128KB 12bit 20KB 2V~3.6V 32 Bit 37 72MHz ARM Cortex-M3 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
MCP3204-CI/P
PDIP-14-40℃~+85℃ 0.5LSB 100kHz 12 1MHz、2MHz 2.7V~5.5V 2LSB 4 External External Multiplexers Not supported SAR SPI Yes PDIP-14 Analog to Digital Converters (ADC) ROHSMicrochip TechnologyAnalog To Digital Converters (ADC)MCP6004-E/P
PDIP-14-40℃~+125℃ 1.8V~6V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-14 Operational Amplifier ROHSMicrochip TechnologyOperational Amplifier
TL072
SOP-8-18V~18V 0℃~+70℃ 1.4mA 1.5nA 10V/us 10mV 2 2.5nA 3MHz 85dB SOP-8 Operational Amplifier ROHSGcoreOperational Amplifier
74HC595D
SOP-16-40℃~+105℃ 1 100MHz 15ns@6V,50pF 2V~6V 74HC 8 Asynchronous clear function、Output enable Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSJSMSEMIShift Registers
LM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorised
LM4040B25FTA
SOT-23-40℃~+125℃ 100ppm/℃ 15mA 2.5V 35uVrms 60uA Fixed Parallel ±0.2% SOT-23 Voltage Reference ROHSDiodes IncorporatedVoltage ReferenceMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
1N5819HW
SOD-123-65℃~+150℃ 1 Independent 1A 1mA@40V 25A 40V 450mV@1A SOD-123 Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes
README
README.mdMutable Instruments' Eurorack Modules.
Forked from pichenettes' version and identical except:
- Eagle brd and sch files converted to XML (making possible import into KiCad)
- For some modules, KiCad versions have been added
I have updated this repo to reflect upstream changes, but I am no longer able to convert the Eagle files, so not all are available as XML.
- Blades: Dual multimode filter.
- Blinds: Quad VC-polarizer.
- Braids: Macro-oscillator.
- Branches: Dual Bernoulli gate.
- Clouds: Texture synthesizer.
- Ears: Contact microphone.
- Edges: Quad chiptune digital oscillator.
- Elements: Modal synthesizer.
- Frames: Keyframer/mixer.
- Grids: Topographic drum sequencer.
- Kinks: Utility module - rectifier, analog logic, S&H, noise.
- Links: Utility module - buffer, mixer.
- Marbles: Random sampler.
- Peaks: Dual trigger converter.
- Plaits: Macro oscillator.
- Rings: Resonator.
- Ripples: Liquid 2-pole BP, 2-pole LP and 4-pole LP filter.
- Shades: Triple attenuverter.
- Shelves: EQ filter.
- Stages: Segment generator.
- Streams: Dual dynamics gate.
- Tides: Tidal modulator.
- Veils: Quad VCA.
- Volts: +5V power module.
- Warps: Meta-modulator.
- Yarns: MIDI interface.
License
Code (AVR projects): GPL3.0.
Code (STM32F projects): MIT license.
Hardware: cc-by-sa-3.0
By: Emilie Gillet (emilie.o.gillet@gmail.com)
Guidelines for derivative works
Mutable Instruments is a registered trademark.
The name "Mutable Instruments" should not be used on any of the derivative works you create from these files.
We do not recommend you to keep the original name of the Mutable Instruments module for your derivative works.
For example, your 5U adaptation of Mutable Instruments Clouds can be called "Foobar Modular - Particle Generator".
Parts
120| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 100 | braids_v50:R0603 | R4, R5, R6, R7, R8, R9, R10, R12, R13, R14, R15, R16, R17, R18 |
| 14 | 100n | braids_v50:C0603 | C1, C2, C3, C4, C5, C7, C11, C18, C20, C23, C26, C27, C28, C31 |
| 11 | 24.9k | braids_v50:R0603 | R30, R31, R34, R35, R41, R42, R43, R44, R50, R52, R53 |
| 6 | 1.0k | braids_v50:R0603 | R1, R2, R3, R11, R23, R55 |
| 6 | 100k | braids_v50:R0603 | R24, R29, R47, R48, R54, R56 |
| 6 | 10kB | braids_v50:ALPS_POT_VERTICAL_PS | R19, R20, R21, R36, R37, R38 |
| 6 | PJ301_THONKICONN6 | braids_v50:WQP_PJ_301M6 | J1, J2, J3, J4, J5, J6 |
| 5 | MMBT3904 | braids_v50:SOT23-BEC | Q1, Q2, Q3, Q4, Q6 |
| 4 | 1n | braids_v50:C0603 | C13, C14, C16, C17 |
| 3 | 10k | braids_v50:R0603 | R22, R27, R33 |
| 3 | 200k | braids_v50:R0603 | R28, R32, R40 |
| 2 | braids_v50:EVQ-Q2 | SW2, SW3 | |
| 2 | 100p | braids_v50:C0603 | C21, C22 |
| 2 | 18p | braids_v50:C0603 | C9, C10 |
| 2 | 1N5819HW | braids_v50:SOD123 | D1, D2 |
| 2 | 1u | braids_v50:C0603 | C6, C12 |
| 2 | 22u | braids_v50:PANASONIC_C | C15, C19 |
| 2 | 39k | braids_v50:R0603 | R45, R46 |
| 2 | 47u | braids_v50:PANASONIC_D | C25, C30 |
| 2 | 49.9k | braids_v50:R0603 | R25, R26 |
| 2 | 74HC595D | braids_v50:SO16 | IC1, IC2 |
| 2 | KINGBRIGHT-PDC54-11 | braids_v50:PDC54 | DISP1, DISP2 |
| 1 | braids_v50:1X06 | JP3 | |
| 1 | 10u | braids_v50:PANASONIC_B | C24 |
| 1 | 120k | braids_v50:R0603 | R39 |
| 1 | 330 | braids_v50:R0603 | R51 |
| 1 | 4.7 | braids_v50:R1206 | R49 |
| 1 | 470n | braids_v50:C0603 | C8 |
| 1 | 47p | braids_v50:C0603 | C29 |
| 1 | 8MHz | braids_v50:HC49UP | Q5 |
| 1 | DAC8551 | braids_v50:MSOP-8 | IC5 |
| 1 | EC12E_SW | braids_v50:ALPS_EC12E_SW | SW1 |
| 1 | LM1117-3.3 | braids_v50:TO252 | IC6 |
| 1 | LM4040B10 | braids_v50:DBZ_R-PDSO-G3 | IC8 |
| 1 | LM4040B25 | braids_v50:DBZ_R-PDSO-G3 | IC3 |
| 1 | M05X2MINIJTAG | braids_v50:2X5-1.27 | JP2 |
| 1 | M05X2PTH | braids_v50:AVR_ICSP | JP1 |
| 1 | MCP3204 | braids_v50:SO14 | IC4 |
| 1 | MCP6004 | braids_v50:SO14 | IC7 |
| 1 | STM32F103CBT6 | braids_v50:LQFP48 | UC1 |
| 1 | TL072 | braids_v50:SO08 | IC10 |
| 1 | TL074D | braids_v50:SO14 | IC9 |
More from jonstapleton/mutable_eurorack
12- 2 layers69.2 × 106.7 mm
- 2 layers97.8 × 102.9 mm
- 2 layers88.9 × 101.6 mm
- 2 layers58.7 × 107.6 mm
- 2 layers59.1 × 106.7 mm
- 2 layers69.2 × 106.7 mm
- 2 layers48.9 × 106.7 mm
- 2 layers59 × 106.7 mm
- 2 layers78.1 × 102.9 mm
- 2 layers19 × 108.4 mm
- 2 layers19 × 108.4 mm
Similar boards
- 2 layers38.7 × 106.7 mm
- 2 layers100 × 28.6 mm
- 4 layers59.2 × 106.4 mm
- 2 layers171.5 × 106.7 mm
Sequencer
westlicht/performer-hardware
PER|FORMER Eurorack Sequencer - Hardware Design Files
435 parts110 - 4 layers154.9 × 128.4 mm
Daisy hardware v1
rafkhan/lowstepper
Dual phase manipulation low frequency oscillator by Okay Synthesizer.
161 parts9 - 4 layers80 × 80 mm
- 2 layers60 × 110 mm
- 2 layers90 × 110 mm
Questions
How big is the Braids v50 PCB?
It measures 78.7 × 106.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Braids v50 use?
120 parts, built around the STM32F103CBT6, MCP3204-CI/P, MCP6004-E/P and TL072. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Braids v50 KiCad files?
From the jonstapleton/mutable_eurorack repository on GitHub, at the commit this page was made from: the board is braids/hardware_design/pcb/KiCad/braids_v50.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Braids v50 design in my own project?
Its repository states no licence, so its author keeps all rights: ask jonstapleton before reusing the design.