

BarraCorto
Repositorio temporal de diseños PCB propios
- Size
- 250.2 × 88.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 54
- Nets
- 39
- Pads
- 152
- Tracks, vias
- 340, 10
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 16 Jan 2024
- Updated
- 17 Jan 2024
Overview
BarraCorto is an open-source printed circuit board by hernangmol, from the hernangmol/temp_PCB repository on GitHub. It is a 2-layer board of 250.2 × 88.9 mm with 54 parts on 39 nets, routed with 340 tracks and 10 vias.
It is built around the LDD-1000L, L7805 and SMBJ15A, with the SMBJ20A among its other parts. Its parts include 16 capacitors, 11 resistors, 6 connectors, 5 ICs and 3 inductors.
Main components
4LDD-1000L
-- ROHSMWPower Module/Power SupplyL7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSMBJ15A
DO-214AA(SMB)-65℃~+150℃ 15V 18.5V 1uA 24.4V 24.6A@10/1000us 600W@10/1000us TVS Unidirectional DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHSMDDESD And Surge Protection (TVS/ESD)SMBJ20A
DO-214AA(SMB)-65℃~+150℃ 18.6A 1uA 20V 24.5V 32.4V 600W TVS Unidirectional DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHSMDDESD And Surge Protection (TVS/ESD)
README
README.mdtemp_PCB
Repositorio temporal de diseños PCB propios
Carpeta SMTB:
Contiene el trabajo "Sistema de monitoreo térmico de bogies", realizado en el marco de la Especialización en Sistemas Embebidos (FIUBA) para Trenes Argentinos Operaciones. Se trata de un desarrollo para sustitución de importación de un sistema incluido en el equipamiento original de las locomotoras CNR - CKD 8G/H. (Ver repositorio github/hernangmol/SMTB.git)
Carpeta Barra_cortocircuito:
Se trata del desarrollo realizado en CENADIF de una barra de cortocircuito para tercer riel. La misma mantiene la condición segura mientras se realizan tareas de mantenimiento de tercer riel. Incorpora además un detector de tensión y luces de aviso de riel energizado.
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 1M/2W | Resistor_THT:R_Axial_DIN0516_L15.5mm_D5.0mm_P20.32mm_Horizontal | R101, R102, R103, R104, R105, R106, R107, R108, R109 |
| 4 | 47uF/400V | Capacitor_THT:CP_Radial_D18.0mm_P7.50mm | C101, C102, C103, C104 |
| 4 | 47uF/450V | Capacitor_THT:CP_Radial_D18.0mm_P7.50mm | C105, C106, C107, C108 |
| 2 | 0.1uF | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C109, C110 |
| 2 | 0.33uF | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C113, C114 |
| 2 | 10 mH | Inductor_THT:L_CommonMode_Toroid_Vertical_L21.0mm_W10.0mm_Px5.08mm_Py12.70mm_Murata_5100 | L102, L103 |
| 2 | 1K | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV102, RV103 |
| 2 | 1N4001 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D101, D102 |
| 2 | 1uF | Capacitor_THT:C_Disc_D8.0mm_W2.5mm_P5.00mm | C111, C115 |
| 2 | 1Ω | Resistor_THT:R_Axial_DIN0516_L15.5mm_D5.0mm_P20.32mm_Horizontal | R110, R111 |
| 2 | BorneraTornillo_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J104, J105 |
| 2 | L7805 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U102, U103 |
| 2 | LDD-1000L | BarraCC:LDD-1000L | U104, U105 |
| 1 | 10D - 11 | Varistor:RV_Disc_D12mm_W7.9mm_P7.5mm | NTC101 |
| 1 | 10D - 20 | Varistor:RV_Disc_D21.5mm_W7.1mm_P10mm | NTC102 |
| 1 | 120uF | Capacitor_THT:CP_Radial_D18.0mm_P7.50mm | C116 |
| 1 | 20K multivueltas | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV101 |
| 1 | 220uF | Capacitor_THT:CP_Radial_D18.0mm_P7.50mm | C112 |
| 1 | 4.7mH/0.38A | Inductor_THT:L_Radial_D27.9mm_P19.05mm_Vishay_IHB-3 | L101 |
| 1 | AE15-EW-S12 | AE15-EW-S12:AE15_EW_S12 | U101 |
| 1 | Bornera_Tornillo_01x04 | TerminalBlock:TerminalBlock_bornier-4_P5.08mm | J101 |
| 1 | Conn_01x03 | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J102 |
| 1 | Conn_01x04 | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J_M101 |
| 1 | HRG3F-S-DC5V | Relay_THT:Relay_SPDT_Finder_40.11 | K101 |
| 1 | S14K880 | Varistor:RV_Disc_D15.5mm_W11mm_P7.5mm | MOV101 |
| 1 | S20K1000 | Varistor:RV_Disc_D21.5mm_W11.4mm_P10mm | MOV102 |
| 1 | SMBJ15A | Diode_SMD:D_SMB | TVS102 |
| 1 | SMBJ20A | Diode_SMD:D_SMB | TVS101 |
| 1 | USB_A | Connector_USB:USB_A_Molex_67643_Horizontal | J106 |
| 1 | USB_B_Micro | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J103 |
More from hernangmol/temp_PCB
4- 2 layers98 × 77.1 mm

- 2 layers240 × 40 mm

- 2 layers140 × 40 mm

- 2 layers35.1 × 118.1 mm

Similar boards
- 2 layers150 × 100 mm

Home automation final
ginomcfino/home-automation-controller
STM32 home automation controller with Ethernet, Zigbee, relay control, and sensor interfaces. Designed in KiCad.
95 parts - 6 layers158 × 158 mm

Fpv drone
zeodotdev/zeo-boards
ESP32-S3 development board with onboard BME280 (temperature, humidity, pressure) and LSM6DS3 (6-axis IMU) sensors. This repo contains the designs, ESP-IDF firmware, and a Python plotter for visualization.
158 parts3 - 2 layers59 × 22 mm

Buck converter automotive
MG-5/buck-converter-automotive
12V-to-5V buck converter for automotive purposes
36 parts2MIT - 2 layers350 × 235 mm

Dogrudan sdr C
kocer/direct-sampling-sdr
Direct-sampling SDR transceiver with four phase-coherent channels, and a class-A power amplifier for 1.8 to 54 MHz.
406 parts1 - 4 layers100 × 100 mm

Pcb AMY
Rivercraft911/R-01_Raster_Laser_Projector
Red, blue and green lasers combine through two dichroc mirrors and bounce off a spinning polygon mirror, which each mirror facet makes one scanline.
159 parts1 - 8 layers140 × 314.2 mm

- 6 layers140 × 90 mm

Atlas drive
AtlasAutoware/carv2
Atlas Autoware car v2: drive board (ESC, BMS, USB-C charging), Jetson carrier, printed kit
409 parts - 4 layers80.3 × 80.3 mm

AutoTiller
JoeyStrandnes/AutoTiller
Open source DIY device for steering boats with tillers
66 partsGPL-3.0
Questions
How big is the BarraCorto PCB?
It measures 250.2 × 88.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BarraCorto use?
54 parts, built around the LDD-1000L, L7805, SMBJ15A and SMBJ20A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BarraCorto KiCad files?
From the hernangmol/temp_PCB repository on GitHub, at the commit this page was made from: the board is Barra_cortocircuito/Placa_principal 2_2/BarraCorto.kicad_pcb and its schematic Barra_cortocircuito/Esquematico 2_2/BarraCorto.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BarraCorto design in my own project?
Its repository states no licence, so its author keeps all rights: ask hernangmol before reusing the design.