

Home automation final
STM32 home automation controller with Ethernet, Zigbee, relay control, and sensor interfaces. Designed in KiCad.
- Size
- 150 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 95
- Nets
- 167
- Pads
- 438
- Tracks, vias
- 728, 83
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 28 Oct 2026
- Updated
- 28 Oct 2026
Overview
Home automation final is an open-source printed circuit board by ginomcfino, from the ginomcfino/home-automation-controller repository on GitHub. It is a 2-layer board of 150 × 100 mm with 95 parts on 167 nets, routed with 728 tracks and 83 vias.
It is built around the STM32F407VGT6, CC2520RHD and AMS1117-3.3, with the L7805, W5500 and BC337 among its other parts. Its parts include 35 capacitors, 15 resistors, 11 connectors, 9 diodes and 5 ICs. It belongs with the home automation and IoT and interfaces and adapters boards and the STM32 boards of this library.
Main components
8STM32F407VGT6
LQFP-100(14x14)-40℃~+85℃ 1.8V~3.6V 12bit 12bit 168MHz 192KB 1MB 32 Bit 82 ARM Cortex-M4 Built-in FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)CC2520RHD
VQFN-28-EP(5x5)-40℃~+125℃ -98dBm 1.8V~3.8V 18.5mA 2.394GHz~2.507GHz 2.44GHz 250Kbps 33.6mA 8dBm SPI、ADC Supports RSSI function、CRC check function、Input sync word detection function、Automatic response function ZigBee、802.15.4 transceiver QFN-28-EP(5x5) RF Transceiver ICs ROHSTexas InstrumentsRF Transceiver ICsAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsL7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsW5500
LQFP-48_7x7-40℃~+85℃ 10BASE-T、100BASE-TX 3.3V 32KB SPI SPI Wake-up function、Programmable LED indication、Low-power mode Yes LQFP-48(7x7) Ethernet Controllers ROHSWIZNETEthernet ControllersBC337
TO-92-31 NPN 100 100MHz 100nA 45V 5V 625mW 700mV 800mA NPN TO-92-3 Bipolar (BJT) ROHSFoshan Blue Rocket ElecBipolar (BJT)PESD3V3U1UL
DFN1006-2(SOD-882)-55℃~+150℃ 1 1nA 2.6pF 3.3V 4.5V ESD IEC 61000-4-2 Unidirectional DFN1006-2(SOD-882) ESD and Surge Protection (TVS/ESD) ROHSNexperiaESD And Surge Protection (TVS/ESD)SMBJ15A
DO-214AA(SMB)-65℃~+150℃ 15V 18.5V 1uA 24.4V 24.6A@10/1000us 600W@10/1000us TVS Unidirectional DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHSMDDESD And Surge Protection (TVS/ESD)
README
README.mdHome Automation Controller
An STM32-based home automation controller design combining Ethernet, a radio interface, relay outputs, and sensor connections.
Status: CAD design study
This is my manually developed circuit and PCB design. Component libraries, manufacturer models, and other supplied assets retain their original attribution.
- Hardware source: schematics, PCB, project, and required local libraries.
- Schematic PDF: all schematic sheets.
- Visual guide: labeled board and schematic views.
- Check notes: packaging checks and current automated-check results.
Open hardware/home_automation_final.kicad_pro with KiCad 10 and its standard symbol, footprint, and 3D model libraries.
Parts
95| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 100nF | Capacitor_SMD:C_0603_1608Metric | C4, C5, C10, C11, C12, C13, C14, C15, C16, C17, C27, C31, C32, C33, C34, C35 +1 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R4, R8, R14, R15 |
| 4 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D4, D5, D6, D7 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric | R10, R11, R12, R13 |
| 4 | BC337 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2, Q3, Q4 |
| 4 | G5V-1 | Relay_THT:Relay_SPDT_Omron_G5V-1 | K1, K2, K3, K4 |
| 2 | 10pF | Capacitor_SMD:C_0603_1608Metric | C28, C29 |
| 2 | 15pF | Capacitor_SMD:C_0603_1608Metric | C25, C26 |
| 2 | 18pF | Capacitor_SMD:C_0603_1608Metric | C20, C21 |
| 2 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C8, C9 |
| 2 | 20pF | Capacitor_SMD:C_0603_1608Metric | C18, C19 |
| 2 | 22uF 10V | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C3, C6 |
| 2 | 470R | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 75R 1% | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 2 | PESD3V3U1UL | Diode_SMD:D_SOD-882 | D8, D9 |
| 1 | 100uF 25V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C22 |
| 1 | 12.4k 1% | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 1nF / 2kV | Capacitor_SMD:C_1812_4532Metric | C24 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C30 |
| 1 | 25MHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y2 |
| 1 | 3.9nH | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | 32MHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y3 |
| 1 | 330nF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C23 |
| 1 | 56k 1% | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 8MHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | BOOT0 SELECT | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | CC2520 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U5 |
| 1 | DC_12V_INPUT | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | ETC1-1-13 4.5-3000MHz | Transformer_SMD:Transformer_MACOM_SM-22 | TR2 |
| 1 | GREEN | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | L7805 | Package_TO_SOT_SMD:TO-252-3_TabPin2 | U1 |
| 1 | OUT1_COM_NO | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J6 |
| 1 | OUT2_COM_NO | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J7 |
| 1 | OUT3_COM_NO | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J8 |
| 1 | OUT4_COM_NO | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J9 |
| 1 | PT61017PEL 10/100BASE-T | Transformer_SMD:Transformer_Ethernet_Bourns_PT61017PEL | TR1 |
| 1 | RED | LED_SMD:LED_0805_2012Metric | D3 |
| 1 | RESET | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | RJ45 8P8C | Connector_RJ:RJ45_Amphenol_RJHSE5380 | J4 |
| 1 | SENSOR1 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J10 |
| 1 | SENSOR2 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J11 |
| 1 | SMA 2.4GHz 50R | Connector_Coaxial:SMA_Molex_73251-2200_Horizontal | J5 |
| 1 | SMBJ15A | Diode_SMD:D_SMB | D1 |
| 1 | STM32F407VGT6 | Package_QFP:LQFP-100_14x14mm_P0.5mm | U3 |
| 1 | SWD_HEADER | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | UART_DEBUG | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | W5500 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U4 |
The 91 most common of 95 parts.
Similar boards
- 4 layers144.3 × 143.8 mm

- 4 layers80 × 49 mm

- 4 layers184.6 × 108.2 mm

- 4 layers100 × 80 mm

Low Power Cellular ePaper Device ESP32-S3 SIM7600
xmyoot/cellular-epaper-esp32s3-sim7600
Low-Power Cellular ePaper Device with ESP32-S3 and SIM7600 LTE Cat-1
108 parts - 4 layers81 × 55 mm

- 2 layers67 × 50 mm

QuadcopterMain
vedderb/QuadcopterSystem
The hardware and software for our quadcopter system
95 parts30GPL-3.0 - 2 layers41 × 70.5 mm

Trx antena pcb
Juanvmont/Poncho-EDU-CIAA-NXP-RF-2.4GHz-Antena-PCB
Este circuito de poncho implementa una unidad de radio que opera en la banda de frecuencias abierta de 2.4GHz y compila con aplicaciones de la EDU-CIAA NXP que soportan el estándar IEEE 802.15.4: IEEE Standards…
52 parts1 - 4 layers137.8 × 105.3 mm

Questions
How big is the Home automation final PCB?
It measures 150 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Home automation final use?
95 parts, built around the STM32F407VGT6, CC2520RHD, AMS1117-3.3 and L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Home automation final KiCad files?
From the ginomcfino/home-automation-controller repository on GitHub, at the commit this page was made from: the board is hardware/home_automation_final.kicad_pcb and its schematic hardware/ethernet_radio.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Home automation final design in my own project?
Its repository states no licence, so its author keeps all rights: ask ginomcfino before reusing the design.