

RCCAR IF Board GPS
The RISE Self-Driving Model Vehicle Platform
- Size
- 81 × 55 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 173
- Nets
- 186
- Pads
- 709
- Tracks, vias
- 2,695, 457
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20170123)
- Created
- 6 Apr 2017
- Updated
- 16 Jan 2024
Overview
RCCAR IF Board GPS is an open-source printed circuit board by vedderb, from the vedderb/rise_sdvp repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 81 × 55 mm with 173 parts on 186 nets, routed with 2,695 tracks and 457 vias.
It is built around the CC2520RHD, AP131-33WG and CC1120, with the TJA1051TK/3/1 among its other parts. Its parts include 78 capacitors, 34 resistors, 18 inductors, 17 connectors and 14 ICs. It belongs with the radio and wireless boards and the STM32 boards of this library.
Main components
4CC2520RHD
VQFN-28-EP(5x5)-40℃~+125℃ -98dBm 1.8V~3.8V 18.5mA 2.394GHz~2.507GHz 2.44GHz 250Kbps 33.6mA 8dBm SPI、ADC Supports RSSI function、CRC check function、Input sync word detection function、Automatic response function ZigBee、802.15.4 transceiver QFN-28-EP(5x5) RF Transceiver ICs ROHSTexas InstrumentsRF Transceiver ICsAP131-33WG
SOT-25-40℃~+85℃@(Ta) 1 100uA 3.3V 300mA 5.5V 500mV@(300mA) 60dB@(100Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Noise bypass terminal、Built-in soft-start Positive SOT-25 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsCC1120
UncategorisedTexas InstrumentsTJA1051TK/3/1
-UncategorisedNXP Semiconductors
README
Hardware/f9p_board/README.mdUBLOX ZED F9P based positioning controller (Work in progress!).
Parts
173| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | 2.2u | Capacitors_SMD:C_0603 | C2, C3, C6, C10, C11, C12, C19, C20, C29, C52, C53, C55, C57, C58, C60, C61 +14 |
| 17 | 100n | Capacitors_SMD:C_0402 | C13, C14, C15, C17, C27, C28, C32, C33, C34, C35, C36, C37, C38, C39, C41, C42 +1 |
| 9 | 1k | Resistors_SMD:R_0603 | R1, R2, R6, R10, R24, R25, R26, R27, R35 |
| 6 | 100n | Capacitors_SMD:C_0603 | C5, C54, C59, C65, C75, C76 |
| 6 | 15p | Capacitors_SMD:C_0603 | C1, C4, C16, C18, C30, C31 |
| 5 | 220R | Resistors_SMD:R_0603 | R17, R18, R19, R33, R34 |
| 5 | 22R | Resistors_SMD:R_0603 | R7, R9, R21, R22, R23 |
| 4 | 0R | Resistors_SMD:R_0603 | R15, R16, R28, R29 |
| 4 | P*** | crf1:1pin_4mm | 1PIN, 1PIN, 1PIN, 1PIN |
| 3 | 10k | Resistors_SMD:R_0603 | R4, R14, R31 |
| 3 | 2.2p | Capacitors_SMD:C_0402 | C23, C24, C47 |
| 3 | 5.1p | Capacitors_SMD:C_0402 | C48, C49, C50 |
| 3 | 56n | Resistors_SMD:R_0402 | L5, L6, L18 |
| 3 | BEAD | Resistors_SMD:R_0603 | L1, L8, L17 |
| 3 | SMA | crf1:sma_90_crf | J1, J2, J3 |
| 2 | 100u | Capacitors_Tantalum_SMD:Tantalum_Case-B_EIA-3528-21_Wave | C56, C69 |
| 2 | 12p | Capacitors_SMD:C_0402 | C22, C72 |
| 2 | 15n | Resistors_SMD:R_0402 | L7, L12 |
| 2 | 1n | Capacitors_SMD:C_0402 | C21, C71 |
| 2 | 22U | w_smd_inductors:inductor_smd_4.8x2.8mm | L14, L16 |
| 2 | 27n | Resistors_SMD:R_0402 | L9, L10 |
| 2 | 32M | Crystals:Crystal_SMD_5032_4Pads | X2, X3 |
| 2 | 56k | Resistors_SMD:R_0603 | R5, R11 |
| 2 | CAN | w_conn_jst-ph:b4b-ph-kl | P8, P9 |
| 2 | MCP16311/2 | Housings_SSOP:MSOP-8_3x3mm_Pitch0.65mm | U5, U6 |
| 2 | RED | LEDs:LED_0603 | D1, D4 |
| 2 | USB_SUPPLY | Buttons_Switches_SMD:SW_SPDT_PCM12 | U9, U11 |
| 1 | 0.2p | Capacitors_SMD:C_0402 | C26 |
| 1 | 1.8n | Capacitors_SMD:C_0402 | C40 |
| 1 | 100p | Capacitors_SMD:C_0402 | C46 |
| 1 | 18R | Resistors_SMD:R_0402 | R12 |
| 1 | 18p | Capacitors_SMD:C_0402 | C25 |
| 1 | 1n | Resistors_SMD:R_0402 | L3 |
| 1 | 22n | Resistors_SMD:R_0402 | L13 |
| 1 | 2n | Resistors_SMD:R_0402 | L4 |
| 1 | 3.9k | Resistors_SMD:R_0603 | R8 |
| 1 | 33k | Resistors_SMD:R_0603 | R30 |
| 1 | 39p | Capacitors_SMD:C_0402 | C44 |
| 1 | 4.7R | Resistors_SMD:R_0603 | R20 |
| 1 | 4.7n | Resistors_SMD:R_0402 | L2 |
| 1 | 43n | Resistors_SMD:R_0402 | L11 |
| 1 | 4R7 | Resistors_SMD:R_0603 | R3 |
| 1 | 52.3k | Resistors_SMD:R_0603 | R13 |
| 1 | 56p | Capacitors_SMD:C_0402 | C45 |
| 1 | 6.2p | Capacitors_SMD:C_0402 | C51 |
| 1 | 8M | Crystals:Crystal_SMD_5032_4Pads | X1 |
| 1 | ADC_GPIO | w_conn_jst-ph:b6b-ph-kl | P7 |
| 1 | AP131-33 | TO_SOT_Packages_SMD:SOT-23-5 | U12 |
| 1 | Address | crf1:SW_DIP_SMD_x8_Slide | SW1 |
| 1 | BLUE | LEDs:LED_0603 | D3 |
| 1 | CC1120 | Housings_DFN_QFN:QFN-32-1EP_5x5mm_Pitch0.5mm | U4 |
| 1 | CC2520 | Housings_DFN_QFN:QFN-28-1EP_5x5mm_Pitch0.5mm | U2 |
| 1 | CC2592 | Housings_DFN_QFN:QFN-16-1EP_4x4mm_Pitch0.65mm | U3 |
| 1 | DNM | Resistors_SMD:R_0402 | L15 |
| 1 | GREEN | LEDs:LED_0603 | D2 |
| 1 | I2C | w_conn_jst-ph:b4b-ph-kl | P3 |
| 1 | I2C_VOLTAGE | Buttons_Switches_SMD:SW_SPDT_PCM12 | U10 |
| 1 | MPU9150 | Housings_DFN_QFN:QFN-24-1EP_4x4mm_Pitch0.5mm | U8 |
| 1 | MPU9250 | Housings_DFN_QFN:QFN-24_3x3mm_Pitch0.4mm | U14 |
| 1 | NRF_SPI | w_conn_jst-ph:b8b-ph-kl | P5 |
| 1 | OUT_1 | Pin_Headers:Pin_Header_Straight_1x03 | P11 |
| 1 | OUT_2 | Pin_Headers:Pin_Header_Straight_1x03 | P12 |
| 1 | OUT_3 | Pin_Headers:Pin_Header_Straight_1x03 | P14 |
| 1 | OUT_4 | Pin_Headers:Pin_Header_Straight_1x03 | P15 |
| 1 | POWER | w_conn_jst-ph:b4b-ph-kl | P1 |
| 1 | STM32F40X_LQFP100 | Housings_QFP:LQFP-100_14x14mm_Pitch0.5mm | U1 |
| 1 | SWD | w_conn_jst-ph:b6b-ph-kl | P6 |
| 1 | TJA1051TK3 | Housings_DFN_QFN:DFN-8-1EP_3x3mm_Pitch0.65mm | U7 |
| 1 | UART | w_conn_jst-ph:b4b-ph-kl | P4 |
| 1 | USB_STM | Connectors:USB_Mini-B | P2 |
| 1 | USB_UBLOX | Connectors:USB_Mini-B | P13 |
| 1 | ublox_neo_m8p | crf1:ublox_neo | U13 |
More from vedderb/rise_sdvp
4- 4 layers75 × 41 mm

- 2 layers127 × 36.2 mm

- 4 layers64 × 27 mm

- 2 layers56 × 34.5 mm

Similar boards
- 4 layers92.5 × 92.5 mm

- 4 layers100 × 99.9 mm

- 4 layers40 × 40 mm

- 2 layers67 × 50 mm

QuadcopterMain
vedderb/QuadcopterSystem
The hardware and software for our quadcopter system
95 parts30GPL-3.0 - 2 layers41 × 70.5 mm

Trx antena pcb
Juanvmont/Poncho-EDU-CIAA-NXP-RF-2.4GHz-Antena-PCB
Este circuito de poncho implementa una unidad de radio que opera en la banda de frecuencias abierta de 2.4GHz y compila con aplicaciones de la EDU-CIAA NXP que soportan el estándar IEEE 802.15.4: IEEE Standards…
52 parts1 - 4 layers137.8 × 105.3 mm

- 2 layers150 × 100 mm

Home automation final
ginomcfino/home-automation-controller
STM32 home automation controller with Ethernet, Zigbee, relay control, and sensor interfaces. Designed in KiCad.
95 parts - 4 layers35 × 20 mm

Blixten
Alli-Ekundayo/scpt-rl
SCPT-RL trains a cross-attention transformer policy to place PCB components sequentially on a discrete grid. Training has two phases:
60 partsMIT
Questions
How big is the RCCAR IF Board GPS PCB?
It measures 81 × 55 mm and has 4 copper layers, 1.6 mm thick.
What parts does the RCCAR IF Board GPS use?
173 parts, built around the CC2520RHD, AP131-33WG, CC1120 and TJA1051TK/3/1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RCCAR IF Board GPS KiCad files?
From the vedderb/rise_sdvp repository on GitHub, at the commit this page was made from: the board is Hardware/Controller/RCCAR_IF_Board_GPS.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the RCCAR IF Board GPS design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).