4 layers81 × 55 mm
CC2520RHD
Texas InstrumentsExtended
-40℃~+125℃ -98dBm 1.8V~3.8V 18.5mA 2.394GHz~2.507GHz 2.44GHz 250Kbps 33.6mA 8dBm SPI、ADC Supports RSSI function、CRC check function、Input sync word detection function、Automatic response function ZigBee、802.15.4 transceiver QFN-28-EP(5x5) RF Transceiver ICs ROHS
- Part id
- ti/CC2520RHD
- Category
- RF Transceiver ICs
- Package
- VQFN-28-EP(5x5)
- Pins
- 29
- In stock
- 538 at JLCPCB (C8783)
- Used on
- 8 open-source boards
Overview
The CC2520RHD is a RF Transceiver IC made by Texas Instruments in a VQFN-28-EP(5x5) package with 29 pins. -40℃~+125℃ -98dBm 1.8V~3.8V 18.5mA 2.394GHz~2.507GHz 2.44GHz 250Kbps 33.6mA 8dBm SPI、ADC Supports RSSI function、CRC check function、Input sync word detection function、Automatic response function ZigBee、802.15.4 transceiver QFN-28-EP(5x5) RF Transceiver ICs ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:CC2520RHDT, from EasyEDA) and its footprint (Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm, from KiCad's library), ready for a KiCad board. 538 are in stock at JLCPCB (part C8783). 8 open-source boards in 6 repositories on GitHub use it.
Symbol
Footprint
Pinout
29| Pin | Name | Type |
|---|---|---|
| 1 | SO | Unspecified |
| 2 | SI | Unspecified |
| 3 | CSn | Unspecified |
| 4 | GPIO5 | Unspecified |
| 5 | GPIO4 | Unspecified |
| 6 | GPIO3 | Unspecified |
| 7 | GPIO2 | Unspecified |
| 8 | DVDD | Unspecified |
| 9 | GPIO1 | Unspecified |
| 10 | GPIO0 | Unspecified |
| 11 | AVDD5 | Unspecified |
| 12 | XOSC32M_Q2 | Unspecified |
| 13 | XOSC32M_Q1 | Unspecified |
| 14 | AVDD3 | Unspecified |
| 15 | NC | Unspecified |
| 16 | AVDD2 | Unspecified |
| 17 | RF_P | Unspecified |
| 18 | NC | Unspecified |
| 19 | RF_N | Unspecified |
| 20 | AVDD1 | Unspecified |
| 21 | NC | Unspecified |
| 22 | AVDD4 | Unspecified |
| 23 | RBIAS | Unspecified |
| 24 | AVDD_GUARD | Unspecified |
| 25 | RESETn | Unspecified |
| 26 | VREG_EN | Unspecified |
| 27 | DCOUPL | Unspecified |
| 28 | SCLK | Unspecified |
| 29 | DCOUPL | Unspecified |
Open-source boards using it
8- 2 layers67 × 50 mm
QuadcopterMain
vedderb/QuadcopterSystem
The hardware and software for our quadcopter system
95 parts30GPL-3.0 - 2 layers41 × 70.5 mm
Trx antena pcb
Juanvmont/Poncho-EDU-CIAA-NXP-RF-2.4GHz-Antena-PCB
Este circuito de poncho implementa una unidad de radio que opera en la banda de frecuencias abierta de 2.4GHz y compila con aplicaciones de la EDU-CIAA NXP que soportan el estándar IEEE 802.15.4: IEEE Standards…
52 parts1 - 4 layers137.8 × 105.3 mm
- 2 layers150 × 100 mm
Home automation final
ginomcfino/home-automation-controller
STM32 home automation controller with Ethernet, Zigbee, relay control, and sensor interfaces. Designed in KiCad.
95 parts - 4 layers64 × 27 mm
- 4 layers35 × 20 mm
Blixten
Alli-Ekundayo/scpt-rl
SCPT-RL trains a cross-attention transformer policy to place PCB components sequentially on a discrete grid. Training has two phases:
60 partsMIT - 4 layers70.6 × 42 mm
Base raw
Alli-Ekundayo/scpt-rl
SCPT-RL trains a cross-attention transformer policy to place PCB components sequentially on a discrete grid. Training has two phases:
165 partsMIT
Parts like it
1
Questions
Is there a KiCad symbol and footprint for the CC2520RHD?
Yes. The symbol is EasyEDA_Cloud:CC2520RHDT and the footprint Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the CC2520RHD?
VQFN-28-EP(5x5), with 29 pins. Its footprint is drawn on this page.
Where is the CC2520RHD datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the CC2520RHD?
JLCPCB lists it as part C8783, with 538 in stock; the sellers' links on this page open their listings.
What can replace the CC2520RHD?
Parts like it in the library: the AX5043-1-TA05 by onsemi. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the CC2520RHD?
8 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.