Skip to the content
PCBKitNew board
SMBJ15A on a board, in 3D

SMBJ15A

MDD

-65℃~+150℃ 15V 18.5V 1uA 24.4V 24.6A@10/1000us 600W@10/1000us TVS Unidirectional DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHS

Extended
DatasheetJLCPCBLCSCmdd/SMBJ15A
Category
ESD And Surge Protection (TVS, ESD)
Package
DO-214AA(SMB)
Pins
5

Overview

The SMBJ15A is an ESD And Surge Protection made by MDD in a DO-214AA(SMB) package with 2 pins. -65℃~+150℃ 15V 18.5V 1uA 24.4V 24.6A@10/1000us 600W@10/1000us TVS Unidirectional DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHS.

PCBKit's library has its KiCad symbol (Device:D_TVS, from KiCad's library) and its footprint (Diode_SMD:D_SMB, from KiCad's library), ready for a KiCad board. 96,324 are in stock at JLCPCB (part C113988). 82 open-source boards in 64 repositories on GitHub use it.

Symbol

Device:D_TVSFrom KiCad's library

Footprint

12
Diode_SMD:D_SMBFrom KiCad's library

Parameters

11
Clamping Voltage
24.4V
Maximum Clamping Voltage
24.4V
Number of Channels
1
Operating Temperature
-65℃~+150℃
Peak Pulse Current (Ipp)
24.6A@10/1000us
Peak Pulse Power Dissipation (Ppp)
600W@10/1000us
Polarity
Unidirectional
Reverse Leakage Current (Ir)
1uA
Reverse Stand-Off Voltage (Vrwm)
15V
Type
TVS
Voltage - Breakdown
18.5V

Order codes

2

Pinout

2
The pins of the SMBJ15A
PinNameType
1A1Passive
2A2Passive

Open-source boards using it

All 82
  • 6 layers36 × 124 mmOpenDual Reader, the printed circuit board in 3D

    OpenDual Reader

    nuerolynx/embedded-systems-lab

    Arduino UNO R4 WiFi and ESP32 prototypes for access control, automation, displays, monitoring, and Bluetooth audio.

    74 parts4
  • 8 layers217.5 × 187.5 mmBoard c openroute partial, the printed circuit board in 3D

    Board c openroute partial

    ajisrawi/passive-radar-counter-drone

    Passive radar for counter-drone using DVB-T, 4G and 5G: simulation, receiver hardware, FPGA micro-Doppler firmware, antennas, enclosure

    314 parts3
  • 2 layers170.6 × 121.1 mmEIM, the printed circuit board in 3D

    EIM

    bhorst519/bluecar

    232 parts3
  • 4 layers220 × 120 mmCandidate filled profile, the printed circuit board in 3D

    Candidate filled profile

    misko/prompt2device

    The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.

    569 parts3MIT
  • 4 layers100 × 100 mmPCB Design, the printed circuit board in 3D

    PCB Design

    ConquerToFreedom/SwasthEdge

    Low-cost self-diagnosing edge controller for industrial sensor reliability

    89 parts2
  • 4 layers150 × 112 mmBoard v3-83pct, the printed circuit board in 3D

    Board v3-83pct

    dmz006/brain-drain

    Standalone four-bay (plus M.2) NIST 800-88 disk sanitizer: Raspberry Pi CM5 carrier board, Python service, 3D-printed enclosure

    302 parts2
  • 6 layers268 × 230 mmRf board, the printed circuit board in 3D

    Rf board

    PE1RGU/hf-antenna-switch

    Remote HF antenna switch: 3 radios x 4 antennas (path to 8), outdoor relay unit with a hardware safety chain, controlled over Cat6 from a shack interface. KiCad 10, open hardware, designed together with an AI.

    357 parts2CERN-OHL-S-2.0
  • 4 layers100 × 100 mmBrain, the printed circuit board in 3D

    Brain

    Pegoku/SarcasmOS

    Personal assistant characterized by Bender from Futurama

    225 parts2

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/mdd/SMBJ15A" title="SMBJ15A in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/mdd/SMBJ15A.jpg" alt="SMBJ15A" width="1200" height="900">
A picture that opens the part, for a README
[![SMBJ15A](https://pcbkit.io/embed/parts/mdd/SMBJ15A.jpg?size=s)](https://pcbkit.io/parts/mdd/SMBJ15A)

Questions

Is there a KiCad symbol and footprint for the SMBJ15A?

Yes. The symbol is Device:D_TVS and the footprint Diode_SMD:D_SMB, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SMBJ15A?

DO-214AA(SMB), with 2 pins. Its footprint is drawn on this page.

Where is the SMBJ15A datasheet?

MDD publishes it: the Datasheet link on this page opens it.

Where can I order the SMBJ15A?

JLCPCB lists it as part C113988, with 96,324 in stock; the sellers' links on this page open their listings.

What can replace the SMBJ15A?

Parts like it in the library: the SMBJ15CA by MDD, the SMBJ15CA/TR13 by Brightking, the SMBJ15CA by Shandong Jingdao Microelectronics and the SMBJ15A by hongjiacheng. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SMBJ15A?

82 boards in 64 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8