Skip to the content
12

SMBJ15CA

MDDExtended

-65℃~+150℃ 15V 18.5V 1uA 24.4V 24.6A@10/1000us 600W@10/1000us Bidirectional TVS DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHS

Part id
mdd/SMBJ15CA
Category
ESD And Surge Protection (TVS, ESD)
Package
DO-214AA(SMB)
Pins
5
In stock
145,823 at JLCPCB (C113989)
Used on
19 open-source boards

Overview

The SMBJ15CA is an ESD And Surge Protection made by MDD in a DO-214AA(SMB) package with 2 pins. -65℃~+150℃ 15V 18.5V 1uA 24.4V 24.6A@10/1000us 600W@10/1000us Bidirectional TVS DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHS.

PCBKit's library has its KiCad symbol (Device:D_TVS, from KiCad's library) and its footprint (Diode_SMD:D_SMB, from KiCad's library), ready for a KiCad board. 145,823 are in stock at JLCPCB (part C113989). 19 open-source boards in 18 repositories on GitHub use it.

Symbol

Device:D_TVSFrom KiCad's library

Footprint

12
Diode_SMD:D_SMBFrom KiCad's library

Pinout

2
The pins of the SMBJ15CA
PinNameType
1A1Passive
2A2Passive

Open-source boards using it

19See all 19
  • 4 layers241.7 × 56.7 mmDaisy studio, the printed circuit board in 3D

    Daisy studio

    squeedee/daisy-studio

    Daisy Seed Carrier for Balanced Pro Audio

    141 parts14MIT
  • 4 layers78.5 × 91 mmFuSa1, the printed circuit board in 3D

    FuSa1

    engrtech/STM32_RC01_PCB

    PCB on KiKad 9

    119 parts1
  • 2 layers88.6 × 69.9 mmExpressionController, the printed circuit board in 3D

    ExpressionController

    amonbenson/expad

    A four-jack USB MIDI adapter for expression and sustain pedals, built on a Raspberry Pi Pico 2 W. It works out what is plugged into each jack - whichever contact a pedal's wiper is on, and whether it is a potentiometer…

    147 partsMIT
  • 4 layers145 × 73 mmDashboard, the printed circuit board in 3D

    Dashboard

    broncoracing/dashboard

    BR23 Dashboard PCB/Firmware

    284 parts
  • 2 layers53.3 × 68.6 mmArduino uno, the printed circuit board in 3D

    Arduino uno

    Chicken-Fried/Cave-Uno

    Modernized Arduino Uno R3 compatible board powered by Microchip ATmega328PB. Features driverless USB-C, 1.5A sync buck, ideal-diode OR-ing, dual I2C/SPI/UART, and LiDAR topographic artwork.

    85 parts
  • 2 layers82 × 70 mmNODO ACCESO, the printed circuit board in 3D

    NODO ACCESO

    DavidManzano04/control-acceso-iot

    Sistema IoT de control de acceso y asistencia docente con RFID: firmware ESP32 + Hikvision y plataforma web Flask (trabajo de grado UCEVA)

    58 parts
  • 2 layers106.7 × 78.4 mmADC, the printed circuit board in 3D

    ADC

    Dinh-Dai/ADC-converter

    199 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SMBJ15CA?

Yes. The symbol is Device:D_TVS and the footprint Diode_SMD:D_SMB, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SMBJ15CA?

DO-214AA(SMB), with 2 pins. Its footprint is drawn on this page.

Where is the SMBJ15CA datasheet?

MDD publishes it: the Datasheet link on this page opens it.

Where can I order the SMBJ15CA?

JLCPCB lists it as part C113989, with 145,823 in stock; the sellers' links on this page open their listings.

What can replace the SMBJ15CA?

Parts like it in the library: the SMBJ15CA/TR13 by Brightking, the SMBJ15CA by Shandong Jingdao Microelectronics, the SMBJ15A by MDD and the SMBJ15A by hongjiacheng. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SMBJ15CA?

19 boards in 18 repositories on GitHub; the most starred are listed on this page, with their KiCad files.