4 layers99.7 × 108 mm
2 layers30 × 46 mm
Repository for PCB Design Projects
- Size
- 30 × 46 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 93
- Nets
- 82
- Pads
- 302
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 Feb 2020
- Updated
- 26 May 2021
Overview
XESC is an open-source printed circuit board by embeddedalpha, from the embeddedalpha/PCB-Design repository on GitHub, published under the MIT licence. It is a 2-layer board of 30 × 46 mm with 93 parts on 82 nets.
It is built around the STM32G473CEU6, IR2101PBF and ADP2302ARDZ-3.3-R7, with the SP0504BAHTG among its other parts. Its parts include 28 resistors, 22 capacitors, 21 diodes, 7 connectors and 5 ICs. It belongs with the interfaces and adapters and microcontroller boards boards and the STM32 boards of this library.
Main components
4
STM32G473CEU6
UFQFPN-48(7x7)-40℃~+85℃ 1.71V~3.6V 128KB 12bit 12bit 170MHz 32 Bit 42 512KB ARM Cortex-M4 Built-in FLASH UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
IR2101PBF
PDIP-8-40℃~+125℃ 100ns 10V~20V 130mA 150ns 150uA 160ns 2 270mA 50ns Half-Bridge IGBT、MOSFET Under Voltage Protection PDIP-8 Gate Drivers ROHSInfineon TechnologiesGate Drivers
ADP2302ARDZ-3.3-R7
SOIC-8-EP-40℃~+125℃@(TJ) 1 2A 3.3V 3V~20V 700kHz Buck Buck Built-in Fixed No SOIC-8-EP DC-DC Converters ROHSAnalog DevicesDC-DC Converters
SP0504BAHTG
SOT-23-5-55℃~+125℃ 100pF 10A@8/20us 11V、15V 150W@8/20us 5V 8.4V 80nA IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 SOT-23-5 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
README
STM32L433CBT_Developement_Board/README.mdSTM32L433CBTx Development Board
More views
Front Copper
Back Copper
Parts
93| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 100 | Resistor_SMD:R_0805_2012Metric | R6, R7, R8, R10, R11, R15, R16, R17, R18, R19, R20, R21, R22, R23, R27, R28 +1 |
| 13 | 100N | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C3, C10, C11, C12, C13, C16, C17, C19, C20, C21, C22 |
| 8 | D_TVS | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D12, D13, D14, D15, D16, D17, D18, D19 |
| 6 | 1K | Resistor_SMD:R_0805_2012Metric | R4, R5, R12, R13, R14, R26 |
| 6 | DIODE | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3, D11, D20, D21 |
| 6 | IRFR3504ZPbF | Package_TO_SOT_SMD:TO-252-2 | H1, H2, H3, L1, L2, L3 |
| 4 | 10K | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R24 |
| 3 | 1U | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C14, C15, C18 |
| 3 | 4.7U | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4, C5, C6 |
| 3 | IR2101 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U2, U3 |
| 3 | PHASE A | ASSETS:PAD_7X6.75 | J1, J2, J3 |
| 2 | 100N | Capacitor_THT:CP_Radial_D25.0mm_P10.00mm_SnapIn | C23, C24 |
| 1 | 20MHz | Crystal:Crystal_SMD_SeikoEpson_FA238-4Pin_3.2x2.5mm | Y1 |
| 1 | ADP2302ARDZ-3.3 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U4 |
| 1 | BLUE_LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D7 |
| 1 | C_Small | Capacitor_SMD:C_0201_0603Metric | C25 |
| 1 | D_Zener_Small | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D9 |
| 1 | Fuse | Diode_SMD:D_0603_1608Metric | F1 |
| 1 | GND | ASSETS:PAD_7X6.75 | J5 |
| 1 | GREEN_LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D8 |
| 1 | INDC_LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D5 |
| 1 | L_Small | Inductor_SMD:L_Bourns_SRR1260 | L4 |
| 1 | POWER_ON_LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 1 | PWR_IN | ASSETS:PAD_7X6.75 | J4 |
| 1 | QM6015D | Package_TO_SOT_SMD:TO-252-2 | Q1 |
| 1 | RED_LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D6 |
| 1 | R_Small | Resistor_SMD:R_0805_2012Metric | R25 |
| 1 | SP0504BAHT | Package_TO_SOT_SMD:SOT-23-5 | D10 |
| 1 | STM32G473CEU6 | ASSETS:STM32G47CEU6x | IC1 |
| 1 | SWD | ASSETS:SWD_PINS | J7 |
| 1 | UART | Connector_JST:JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J6 |
Questions
How big is the XESC PCB?
It measures 30 × 46 mm and has 2 copper layers, 1.6 mm thick.
What parts does the XESC use?
93 parts, built around the STM32G473CEU6, IR2101PBF, ADP2302ARDZ-3.3-R7 and SP0504BAHTG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the XESC KiCad files?
From the embeddedalpha/PCB-Design repository on GitHub, at the commit this page was made from: the board is XESC v1/XESC.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the XESC design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from embeddedalpha/PCB-Design
12- 4 layers93.6 × 32 mm
- 2 layers40 × 90 mm
- 2 layers34.8 × 30 mm
- 2 layers80 × 50 mm
- 2 layers74.4 × 30 mm
- 2 layers48.3 × 38.1 mm
- 2 layers40 × 25.5 mm
- 2 layers35 × 20 mm
- 2 layers30.2 × 50.3 mm
- 2 layers44.5 × 19.7 mm
- 4 layers
Similar boards
- 4 layers20 × 30 mm
- 4 layers40 × 40 mm
Atmos fc
cypamigon/atmos_fc
Drone flight controller based on STM32G4 with IMU (ICM-468-P), barometer (DPS-386), OSD (MAX7456) and 32MB flash memory for blackbox logging — running Betaflight.
112 parts1MIT - 2 layers27.9 × 31.8 mm
Ee198 final project
ahadrauf2020/microsd_bluetooth_audiobook
Our class project for EE 198: a MicroSD card audiobook reader, transmitted over Bluetooth
23 parts - 2 layers95 × 34 mm
- 8 layers38 × 38 mm
Ridge3-lite
offgridevices/offgrid-hardware
Open hardware from OffGrid Devices. One folder per board. CERN-OHL-S.
260 partsCERN-OHL-S-2.0 - 4 layers
- 2 layers60 × 90 mm
Logger
voltlog/Voltlogger
More info about this project in Voltlog #368. If you would like to order one of these boards ready assembled, check out my Tindie store.
111 parts17GPL-3.0 - 4 layers93.7 × 43.7 mm
Flight Computer
SunDevilRocketry/Flight-Computer
General purpose flight computer for high powered rocketry projects.
113 parts5