4 layers99.7 × 108 mm
4 layers93.6 × 32 mm
ArmTrax
embeddedalpha/PCB-Design77Repository for PCB Design Projects
- Size
- 93.6 × 32 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 98
- Nets
- 98
- Pads
- 478
- Tracks, vias
- 810, 203
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 Feb 2020
- Updated
- 26 May 2021
Overview
ArmTrax is an open-source printed circuit board by embeddedalpha, from the embeddedalpha/PCB-Design repository on GitHub, published under the MIT licence. It is a 4-layer board of 93.6 × 32 mm with 98 parts on 98 nets, routed with 810 tracks and 203 vias.
It is built around the BGA725L6E6327FTSA1, PE4259-63 and TESEO-LIV3F, with the W25Q32JVSSIQ and DS2782E+ among its other parts. Its parts include 46 capacitors, 12 resistors, 10 ICs, 9 inductors and 4 connectors. It belongs with the interfaces and adapters and microcontroller boards boards and the STM32 boards of this library.
Main components
5
BGA725L6E6327FTSA1
DFN-6(0.7x1.1)-15dBm -2dBm -40℃~+85℃ 0.65dB 1.55GHz~1.615GHz 1.5V~3.6V 14dB 20dB 20dB 3.6mA Low-power mode、Digital control interface、Electrostatic protection DFN-6(0.7x1.1) RF Amplifiers ROHSInfineon TechnologiesRF Amplifiers
PE4259-63
SC-70-6-40℃~+85℃ 0.35dB 1.8V~3.3V 10MHz~3GHz 30dB 33.5dBm Integrated control logic SPDT SC-70-6 RF Switches ROHSpSemiRF Switches
TESEO-LIV3F
LCC-18(9.7x10.1)-163dBm -40℃~+85℃ 2.1V~4.3V GPS、BeiDou、Galileo、GLONASS RTC backup power UART、I2C LCC-18(9.7x10.1) GNSS Modules ROHSSTMicroelectronicsGNSS Modules
W25Q32JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 133MHz 1uA 2.7V~3.6V 20 Years 32Mbit 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
DS2782E+
TSSOP-8-40℃~+85℃ 1 1uA 2.5V~4.5V I2C Lithium Battery Support TSSOP-8 Battery Management ROHSMaxim Integrated (Analog Devices)Battery Management ICs
README
STM32L433CBT_Developement_Board/README.mdSTM32L433CBTx Development Board
More views
Front Copper
Back Copper
Parts
98| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | X | Capacitor_SMD:C_0201_0603Metric | C20, C23, C25, C33, C35, C36, C38, C40, C42, C43, C44, C45 |
| 7 | 2.2pF | Capacitor_SMD:C_0201_0603Metric | C1, C2, C3, C4, C5, C46, C47 |
| 6 | X | Inductor_SMD:L_0201_0603Metric | L2, L4, L5, L7, L8, L9 |
| 5 | 1K | Resistor_SMD:R_0402_1005Metric | R5, R6, R7, R8, R9 |
| 5 | 1nF | Capacitor_SMD:C_0201_0603Metric | C13, C16, C22, C27, C29 |
| 4 | 100nF | Capacitor_SMD:C_0201_0603Metric | C24, C26, C30, C34 |
| 4 | 2.2pF | Capacitor_SMD:C_0402_1005Metric | C9, C10, C11, C12 |
| 4 | 56pF | Capacitor_SMD:C_0201_0603Metric | C28, C31, C37, C39 |
| 3 | 120pF | Capacitor_SMD:C_0201_0603Metric | C21, C32, C41 |
| 3 | Crystal_GND23 | Crystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Y1, Y2, Y3 |
| 3 | TestPoint | TestPoint:TestPoint_Keystone_5015_Micro-Minature | TP1, TP2, TP3 |
| 2 | 100MHz | Inductor_SMD:L_0402_1005Metric | FB1, FB2 |
| 2 | 1pF | Capacitor_SMD:C_0201_0603Metric | C7, C8 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C6, C15 |
| 2 | 22pF | Capacitor_SMD:C_0402_1005Metric | C14, C19 |
| 2 | 4.7K | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | SMA_Edge | ASSETS:SMA-J-P-H-ST-EM1 | J4, J5 |
| 1 | 0 | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 1K7 | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 1N5822 | Diode_SMD:D_0402_1005Metric | D3 |
| 1 | 27nH | Inductor_SMD:L_0201_0603Metric | L6 |
| 1 | 330uF | Capacitor_SMD:C_0402_1005Metric | C17 |
| 1 | 330uH | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | 500 | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 5nF | Inductor_SMD:L_0201_0603Metric | L3 |
| 1 | B4327 | ASSETS:B4327 | U8 |
| 1 | BATTERY CONN | Battery:BatteryHolder_Keystone_1042_1x18650 | J2 |
| 1 | BGA725L6E6327FTSA1 | ASSETS:BGA725L6E6327FTSA1 | U5 |
| 1 | DS2782 | Package_SO:TSSOP-8_4.4x3mm_P0.65mm | U10 |
| 1 | D_Small | Diode_SMD:D_0402_1005Metric | D1 |
| 1 | LED | LED_SMD:LED_0402_1005Metric | D2 |
| 1 | LT1129-3.3_SO8 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | MCP73113_4 | ASSETS:MCP73113 | U3 |
| 1 | PE4259 | ASSETS:PE4259_sc70 | U7 |
| 1 | POWER IN | Connector_JST:JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_Vertical | J3 |
| 1 | R_Small | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48-1EP_7x7mm_P0.5mm_EP3.6x3.6mm | U9 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_CK-JS102011SAQN | SW1 |
| 1 | SX1273 | Package_DFN_QFN:QFN-28-1EP_6x6mm_P0.65mm_EP4.8x4.8mm | U6 |
| 1 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm_NumberLabels | JP1 |
| 1 | TESEO-LIV3F | ASSETS:TESEO-LIV3F | U4 |
| 1 | W25Q32JVSS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U1 |
The 94 most common of 98 parts.
Questions
How big is the ArmTrax PCB?
It measures 93.6 × 32 mm and has 4 copper layers, 1.6 mm thick.
What parts does the ArmTrax use?
98 parts, built around the BGA725L6E6327FTSA1, PE4259-63, TESEO-LIV3F and W25Q32JVSSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ArmTrax KiCad files?
From the embeddedalpha/PCB-Design repository on GitHub, at the commit this page was made from: the board is LOGSX v2/ArmTrax.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ArmTrax design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from embeddedalpha/PCB-Design
12- 2 layers30 × 46 mm
- 2 layers40 × 90 mm
- 2 layers34.8 × 30 mm
- 2 layers80 × 50 mm
- 2 layers74.4 × 30 mm
- 2 layers48.3 × 38.1 mm
- 2 layers40 × 25.5 mm
- 2 layers35 × 20 mm
- 2 layers30.2 × 50.3 mm
- 2 layers44.5 × 19.7 mm
- 4 layers
Similar boards
- 4 layers63.5 × 165.4 mm
- 4 layers40 × 40 mm
- 4 layers40 × 40 mm
PQ EPS
abelwu2001/Picosat-Pocketcube-UTN-FRC-2026
Proyecto Final para el armado de un nanoSat
85 parts3 - 8 layers37 × 40.5 mm
Watch main
ben5049/Smart-Watch
This project aims to take a cheap, common smart watch and upgrade it by replacing the screen and all internal electronics with custom hardware.
206 partsApache-2.0 - 2 layers74.5 × 40 mm
Main Bike Print
IoT-Systems-Lab/Smart-Bike
This repository contains the work for our Smart Bike project, part of the university IoT lab. The goal is to design a lightweight, low-power system that collects and transmits sensor data from a bicycle in real time —…
128 parts - 4 layers32.5 × 29.3 mm
- 2 layers40.5 × 29.6 mm
GPS Compass GNSS
bismarx-v1/GPS-Compass
The compass that doesnt point to north, but it points to a GPS location, or a list of locations and points to the nearest one
38 parts1 - 4 layers150 × 100 mm
