4 layers99.7 × 108 mm
2 layers48.3 × 38.1 mm
RP2040 Dev Board
embeddedalpha/PCB-Design77Repository for PCB Design Projects
- Size
- 48.3 × 38.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 68
- Pads
- 221
- Tracks, vias
- 541, 80
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 Feb 2020
- Updated
- 26 May 2021
Overview
RP2040 Dev Board is an open-source printed circuit board by embeddedalpha, from the embeddedalpha/PCB-Design repository on GitHub, published under the MIT licence. It is a 2-layer board of 48.3 × 38.1 mm with 41 parts on 68 nets, routed with 541 tracks and 80 vias.
It is built around the RP2040, W25Q128JVSIM and NJM2866F33-TE1, with the SP0502BAHTG among its other parts. Its parts include 20 capacitors, 7 resistors, 4 diodes, 4 connectors and 3 ICs. It belongs with the microcontroller boards and interfaces and adapters boards and the RP2040 boards of this library.
Main components
4
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
W25Q128JVSIM
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 10uA 128Mbit 133MHz 2.7V~3.6V 20 Years 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbond ElecNOR FLASH
NJM2866F33-TE1
SOT-23-5-40℃~+85℃ 1 100mA 14V 180mV@(60mA) 180uA 3.3V 75dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSNisshinbo Micro Devices Inc.Voltage Regulators - Linear, Low Drop Out (LDO) Regulators
SP0502BAHTG
SOT-23-40℃~+125℃ 100nA 2 30pF 5.5V 8.5V IEC 61000-4-2 TVS Unidirectional SOT-23 ESD and Surge Protection (TVS/ESD) ROHSLittelfuseESD And Surge Protection (TVS/ESD)
README
STM32L433CBT_Developement_Board/README.mdSTM32L433CBTx Development Board
More views
Front Copper
Back Copper
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100nF | Capacitor_SMD:C_0402_1005Metric | C5, C6, C8, C9, C10, C11, C12, C14, C15, C16, C17, C21 |
| 5 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1, C3, C4, C7, C13 |
| 4 | 1K | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R5 |
| 2 | 20pF | Capacitor_SMD:C_0402_1005Metric | C19, C20 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R6, R7 |
| 2 | LED | LED_SMD:LED_0402_1005Metric | D1, D3 |
| 1 | 100N | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | Conn_01x05 | ASSETS:PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | Conn_01x18 | ASSETS:Gold_Finger_1x18 | J3 |
| 1 | Conn_01x18 | ASSETS:Gold_Finger_1x18B | J4 |
| 1 | Crystal_GND23 | ASSETS:ABM8AIG8000MHZ1ZT | Y1 |
| 1 | D | Diode_SMD:D_0402_1005Metric | D2 |
| 1 | Jumper | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | LOGO | ASSETS:Company_Logo1 | G*** |
| 1 | NJM2866F33-TE1 | ASSETS:SOT95P280X130-5N | IC1 |
| 1 | RP2040 | ASSETS:RP2040-QFN-56 | U2 |
| 1 | SP0502BAHT | Package_TO_SOT_SMD:SOT-23 | D4 |
| 1 | USB_SMD_105450-0101 | ASSETS:MOLEX_105450-0101 | J1 |
| 1 | W25Q128JVSIM | ASSETS:SOIC127P790X216-8N | IC2 |
More from embeddedalpha/PCB-Design
12- 4 layers93.6 × 32 mm
- 2 layers30 × 46 mm
- 2 layers40 × 90 mm
- 2 layers34.8 × 30 mm
- 2 layers80 × 50 mm
- 2 layers74.4 × 30 mm
- 2 layers40 × 25.5 mm
- 2 layers35 × 20 mm
- 2 layers30.2 × 50.3 mm
- 2 layers44.5 × 19.7 mm
- 4 layers
Similar boards
- 2 layers209.6 × 66.7 mm
- 2 layers247.3 × 260.9 mm
ThumbsUp
ak66666/ThumbsUpV3Rp2040
ThumbsUp! v3, a split version of the 4x12 Thumbs Up keyboard with RP2040
156 parts - 2 layers250.9 × 280.9 mm
ThumbsUp
ak66666/ThumbsUpV3Rp2040MX
Split version of the Thumbs Up keyboard with RP2040 for MX switches.
172 parts - 2 layers75 × 75 mm
- 4 layers81.2 × 50.7 mm
- 4 layers48 × 84 mm
FanControlHW
mrspieb/HW-FanControl
Everything required to build the PCB and case of the ventilation fan controller
84 partsGPL-3.0 - 2 layers53.3 × 53.3 mm
RP2040 Test
PartialScience/Custom-RP2040-Dev-Board
First-PCB project: minimal RP2040 microcontroller dev board (W25Q128JV flash, 12 MHz crystal, NCP1117-3.3 LDO, micro-B USB). KiCad sources, BOM, and Inventor enclosure model.
34 partsMIT - 2 layers124.5 × 68.6 mm
Omnicontroller
rp958/omnicontroller
OmniController is an all-in-one controller designed with retrogaming solutions in mind.
53 partsCERN-OHL-S-2.0
Questions
How big is the RP2040 Dev Board PCB?
It measures 48.3 × 38.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RP2040 Dev Board use?
41 parts, built around the RP2040, W25Q128JVSIM, NJM2866F33-TE1 and SP0502BAHTG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RP2040 Dev Board KiCad files?
From the embeddedalpha/PCB-Design repository on GitHub, at the commit this page was made from: the board is RP2040 Development Card/Schematic/RP2040_Dev_Board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the RP2040 Dev Board design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).