4 layers99.7 × 108 mm
4 layers
Repository for PCB Design Projects
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 19
- Pads
- 84
- Tracks, vias
- 86, 18
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 Feb 2020
- Updated
- 26 May 2021
Overview
Copy1 is an open-source printed circuit board by embeddedalpha, from the embeddedalpha/PCB-Design repository on GitHub, published under the MIT licence. It is a 4-layer board with 16 parts on 19 nets, routed with 86 tracks and 18 vias.
It is built around the BGA725L6E6327FTSA1 and TESEO-LIV3F. Its parts include 7 capacitors, 3 ICs, 2 connectors, 2 inductors and 1 resistor. It belongs with the interfaces and adapters and microcontroller boards boards of this library.
Main components
2
BGA725L6E6327FTSA1
DFN-6(0.7x1.1)-15dBm -2dBm -40℃~+85℃ 0.65dB 1.55GHz~1.615GHz 1.5V~3.6V 14dB 20dB 20dB 3.6mA Low-power mode、Digital control interface、Electrostatic protection DFN-6(0.7x1.1) RF Amplifiers ROHSInfineon TechnologiesRF Amplifiers
TESEO-LIV3F
LCC-18(9.7x10.1)-163dBm -40℃~+85℃ 2.1V~4.3V GPS、BeiDou、Galileo、GLONASS RTC backup power UART、I2C LCC-18(9.7x10.1) GNSS Modules ROHSSTMicroelectronicsGNSS Modules
README
STM32L433CBT_Developement_Board/README.mdSTM32L433CBTx Development Board
More views
Front Copper
Back Copper
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 56pF | Capacitor_SMD:C_0201_0603Metric | C4, C5, C6, C7 |
| 2 | 120pF | Capacitor_SMD:C_0201_0603Metric | C1, C3 |
| 1 | 10K | Inductor_SMD:L_0201_0603Metric | R1 |
| 1 | 1nF | Capacitor_SMD:C_0201_0603Metric | C2 |
| 1 | 27nH | Inductor_SMD:L_0201_0603Metric | L2 |
| 1 | 5nF | Inductor_SMD:L_0201_0603Metric | L1 |
| 1 | B4327 | ASSETS:B4327 | U2 |
| 1 | BGA725L6E6327FTSA1 | ASSETS:TSLP_6_2 | U1 |
| 1 | Conn_02x05_Counter_Clockwise | ASSETS:PinHeader_2x05_P2.54mm_Horizontal | J2 |
| 1 | SMA_Edge | ASSETS:SMA-J-P-H-ST-EM1 | J1 |
| 1 | TESEO-LIV3F | ASSETS:TESEO-LIV3F | U3 |
The 15 most common of 16 parts.
Questions
What parts does the Copy1 use?
16 parts, built around the BGA725L6E6327FTSA1 and TESEO-LIV3F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Copy1 KiCad files?
From the embeddedalpha/PCB-Design repository on GitHub, at the commit this page was made from: the board is Teseo GNSS Breakout/copy1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Copy1 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from embeddedalpha/PCB-Design
12- 4 layers93.6 × 32 mm
- 2 layers30 × 46 mm
- 2 layers40 × 90 mm
- 2 layers34.8 × 30 mm
- 2 layers80 × 50 mm
- 2 layers74.4 × 30 mm
- 2 layers48.3 × 38.1 mm
- 2 layers40 × 25.5 mm
- 2 layers35 × 20 mm
- 2 layers30.2 × 50.3 mm
- 2 layers44.5 × 19.7 mm
Similar boards
- 8 layers37 × 40.5 mm
Watch main
ben5049/Smart-Watch
This project aims to take a cheap, common smart watch and upgrade it by replacing the screen and all internal electronics with custom hardware.
206 partsApache-2.0 - 2 layers74.5 × 40 mm
Main Bike Print
IoT-Systems-Lab/Smart-Bike
This repository contains the work for our Smart Bike project, part of the university IoT lab. The goal is to design a lightweight, low-power system that collects and transmits sensor data from a bicycle in real time —…
128 parts - 4 layers32.5 × 29.3 mm
- 2 layers40.5 × 29.6 mm
GPS Compass GNSS
bismarx-v1/GPS-Compass
The compass that doesnt point to north, but it points to a GPS location, or a list of locations and points to the nearest one
38 parts1 - 4 layers150 × 100 mm
- 4 layers25.4 × 42.9 mm
TESEO LIV3F uBUS
mkmielke/LIV3F_mikroBUS
The KiCAD project files for a mikroBUS add-on board featuring the Teseo-LIV3F GNSS module.
35 parts6 - 2 layers28 × 50 mm
- 2 layers
