Skip to the content
PCBKitNew board
STM32G473CEU6 on a board, in 3D

STM32G473CEU6

STMicroelectronics

-40℃~+85℃ 1.71V~3.6V 128KB 12bit 12bit 170MHz 32 Bit 42 512KB ARM Cortex-M4 Built-in FLASH UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHS

Extended
DatasheetJLCPCBLCSCst/STM32G473CEU6
Category
Microcontrollers (MCU, MPU, SOC)
Package
UFQFPN-48(7x7)
Pins
49

Overview

The STM32G473CEU6 is a microcontroller made by STMicroelectronics in a UFQFPN-48(7x7) package with 49 pins. -40℃~+85℃ 1.71V~3.6V 128KB 12bit 12bit 170MHz 32 Bit 42 512KB ARM Cortex-M4 Built-in FLASH UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHS.

PCBKit's library has its KiCad symbol (MCU_ST_STM32G4:STM32G473CEUx, from KiCad's library) and its footprint (Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm, from KiCad's library), ready for a KiCad board. 457 are in stock at JLCPCB (part C1342773). 5 open-source boards in 4 repositories on GitHub use it.

Symbol

VBAT1PC132PC143PC154PF05PF16PG107PA08PA19PA210PA311PA412PA513PA614PA715PC416PB017PB118PB219VREF+20VDDA21PB1022VDD23PB1124PB1225PB1326PB1427PB1528PC629PA830PA931PA1032PA1133PA1234VDD35PA1336PA1437PA1538PC1039PC1140PB341PB442PB543PB644PB745PB846PB947VDD48VSS49
MCU_ST_STM32G4:STM32G473CEUxFrom KiCad's library

Footprint

49
Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mmFrom KiCad's library

From the datasheet

20
Supply, least
1.71 V · VDD, recommended operating min · p. 81
Supply, most
3.6 V · VDD, recommended operating max · p. 81
Supply, least
1.62 V · VDDA, ADC or COMP used, recommended operating min · p. 81
Supply, least
2 V · VDDA, OPAMP used, recommended operating min · p. 81
Supply, least
2.4 V · VDDA, VREFBUF used, recommended operating min · p. 81
Supply, least
1.55 V · VBAT, recommended operating min · p. 81
Supply, absolute maximum
4 V · VDD, VDDA, VBAT and VREF+, absolute max · p. 79
Works from
-40 °C · Ambient, suffix 6, maximum power dissipation min · p. 81
Works up to
85 °C · Ambient, suffix 6, maximum power dissipation max · p. 81
Works up to
105 °C · Ambient, suffix 6, low-power dissipation max · p. 81
Junction, hottest
105 °C · Junction, suffix 6, operating max · p. 81
Junction, hottest
150 °C · Junction, absolute max · p. 80
Takes working
29.5 mA · Run typical, 170 MHz, Range 1 boost, Flash single bank, 25°C, peripherals disabled · p. 87
Takes at most
48 mA · Run max, 170 MHz, Range 1 boost, 105°C, peripherals disabled · p. 87
Takes asleep
130 nA · Standby typical, 3 V, 25°C, RTC and independent watchdog disabled · p. 101
Takes asleep
43 nA · Shutdown typical, 3 V, 25°C, RTC disabled · p. 103
A pin gives at most
20 mA · I/O output source current absolute max · p. 80
Junction to air (UFQFPN48)
26.8 K/W · Junction to ambient · p. 222
Takes asleep
80.5 µA · IDD Stop 1 typical, RTC disabled, VDD = 3.0 V, 25°C · p. 100
Junction to air (UFQFPN48 - 7 × 7 mm)
26.8 K/W · junction-to-ambient thermal resistance · p. 222

What it is and has

23
Core
Arm 32-bit Cortex-M4 CPU with FPU · p. 1
Maximum clock
170 MHz · p. 22
Flash memory
512 Kbytes, ECC support · p. 1
SRAM
96 Kbytes, with hardware parity · p. 1
CCM SRAM
32 Kbytes · p. 1
DMA
16-channel controller · p. 1
ADC
5 × 12-bit, 0.25 µs, up to 42 channels across family · p. 1
DAC
7 × 12-bit channels · p. 1
Comparators
7 ultra-fast rail-to-rail analog comparators · p. 1
Operational amplifiers
6, supporting PGA mode · p. 1
Timers
14 · p. 1
Mathematical accelerator
CORDIC for trigonometric functions · p. 1
Mathematical accelerator
FMAC filter mathematical accelerator · p. 1
External memory interface
Quad-SPI · p. 1
Low-power modes
Sleep, low-power run, low-power sleep, Stop, Standby, Shutdown · p. 23
Power supervision
Brown-out reset and programmable voltage detector · p. 22
Core
Arm Cortex-M4 CPU with FPU · p. 1
Maximum clock frequency
170 MHz · p. 1
Processor features
213 DMIPS, MPU, DSP instructions · p. 1
CORDIC
Trigonometric functions acceleration · p. 1
CPU capabilities
213 DMIPS, MPU, DSP instructions · p. 1
SRAM
128 KB · p. 1
USB
USB 2.0, USB-IF certified for Full-speed device operation · p. 174

Specifications

482
ParameterConditionsAs printedPage
External main supply voltage (including VDD, VDDA, VBAT and VREF+) VDD - VSSmin -0.3 · max 4 V79
Input voltage on FT_c pins VINMinimum VSS-0.3 Vmax 5.5 V79
Input voltage on TT_xx pins VINMinimum VSS-0.3 Vmax 4 V79
Input voltage on any other pins VINMinimum VSS-0.3 Vmax 4 V79
Variations between different VDDX power pins of the same domain |∆VDDx|max 50 mV79
Variations between all the different ground pins |VSSx-VSS|Includes VREF- pinmax 50 mV79
Allowed voltage difference for VREF+ > VDDA VREF+-VDDAmax 0.4 V79
Total current into sum of all VDD power lines (source) ∑IVDDmax 150 mA80
Total current out of sum of all VSS ground lines (sink) ∑IVSSmax 150 mA80
Maximum current into each VDD power pin (source) IVDD(PIN)max 100 mA80
Maximum current out of each VSS ground pin (sink) IVSS(PIN)max 100 mA80
Output current sunk by any I/O and control pin except FT_f IIO(PIN)max 20 mA80
Output current sunk by any FT_f pin IIO(PIN)max 20 mA80
Output current sourced by any I/O and control pin IIO(PIN)max 20 mA80
Total output current sunk by sum of all I/Os and control pins ∑IIO(PIN)max 100 mA80
Total output current sourced by sum of all I/Os and control pins ∑IIO(PIN)max 100 mA80
Injected current on FT_xxx, TT_xx, NRST pins IINJ(PIN)Negative/positive injected-current limits printed as -5/0min -5 · max 0 mA80
Total injected current (sum of all I/Os and control pins) ∑|IINJ(PIN)|Absolute sum of negative injected currents; printed ±25max 25 mA80
Storage temperature range TSTGmin -65 · max 150 °C80
Maximum junction temperature TJmax 150 °C80
Internal AHB clock frequency fHCLKmin 0 · max 170 MHz81
Internal APB1 clock frequency fPCLK1min 0 · max 170 MHz81
Internal APB2 clock frequency fPCLK2min 0 · max 170 MHz81
Standard operating voltage VDDmin 1.71 · max 3.6 V81
Analog supply voltage VDDAADC or COMP used; shared maximum 3.6 V is on a separate linemin 1.62 V81
Analog supply voltage VDDADAC 1 MSPS or DAC 15 MSPS; shared maximum 3.6 V is on a separate linemin 1.71 V81
Analog supply voltage VDDAOPAMP usedmin 2 · max 3.6 V81
Analog supply voltage VDDAVREFBUF used; shared maximum 3.6 V is on a separate linemin 2.4 V81
Backup operating voltage VBATmin 1.55 · max 3.6 V81
I/O input voltage VINTT_xx; maximum VDD+0.3 Vmin -0.3 V81
I/O input voltage VINFT_cmin -0.3 · max 5 V81
I/O input voltage VINAll I/O except TT_xx and FT_c; maximum MIN(MIN(VDD, VDDA)+3.6 V, 5.5 V)min -0.3 V81
Ambient temperature for the suffix 6 version TAMaximum power dissipationmin -40 · max 85 °C81
Ambient temperature for the suffix 6 version TALow-power dissipation; TJ must not exceed TJmaxmin -40 · max 105 °C81
Junction temperature range TJSuffix 6 versionmin -40 · max 105 °C81
Supply current in Run mode IDD (Run)Range 2; 26 MHz; 25°C; HSE bypass; all peripherals disabledtyp 3.65 · max 4.4 mA87
Supply current in Run mode IDD (Run)Range 2; 26 MHz; 55°C; HSE bypass; all peripherals disabledtyp 3.85 · max 6.6 mA87
Supply current in Run mode IDD (Run)Range 2; 26 MHz; 85°C; HSE bypass; all peripherals disabledtyp 4.45 · max 11 mA87
Supply current in Run mode IDD (Run)Range 2; 26 MHz; 105°C; HSE bypass; all peripherals disabledtyp 5.1 · max 16 mA87
Supply current in Run mode IDD (Run)Range 2; 16 MHz; 25°C; HSE bypass; all peripherals disabledtyp 2.3 · max 3 mA87
Supply current in Run mode IDD (Run)Range 2; 16 MHz; 55°C; HSE bypass; all peripherals disabledtyp 2.55 · max 5 mA87
Supply current in Run mode IDD (Run)Range 2; 16 MHz; 85°C; HSE bypass; all peripherals disabledtyp 3.1 · max 9 mA87
Supply current in Run mode IDD (Run)Range 2; 16 MHz; 105°C; HSE bypass; all peripherals disabledtyp 3.8 · max 14.9 mA87
Supply current in Run mode IDD (Run)Range 2; 8 MHz; 25°C; HSE bypass; all peripherals disabledtyp 1.25 · max 2 mA87
Supply current in Run mode IDD (Run)Range 2; 8 MHz; 55°C; HSE bypass; all peripherals disabledtyp 1.5 · max 3.6 mA87
Supply current in Run mode IDD (Run)Range 2; 8 MHz; 85°C; HSE bypass; all peripherals disabledtyp 2.05 · max 7.7 mA87
Supply current in Run mode IDD (Run)Range 2; 8 MHz; 105°C; HSE bypass; all peripherals disabledtyp 2.8 · max 13 mA87
Supply current in Run mode IDD (Run)Range 2; 4 MHz; 25°C; HSE bypass; all peripherals disabledtyp 0.75 · max 1.4 mA87
Supply current in Run mode IDD (Run)Range 2; 4 MHz; 55°C; HSE bypass; all peripherals disabledtyp 0.955 · max 3 mA87
Supply current in Run mode IDD (Run)Range 2; 4 MHz; 85°C; HSE bypass; all peripherals disabledtyp 1.5 · max 7 mA87
Supply current in Run mode IDD (Run)Range 2; 4 MHz; 105°C; HSE bypass; all peripherals disabledtyp 2.3 · max 12 mA87
Supply current in Run mode IDD (Run)Range 2; 2 MHz; 25°C; HSE bypass; all peripherals disabledtyp 0.47 · max 0.99 mA87
Supply current in Run mode IDD (Run)Range 2; 2 MHz; 55°C; HSE bypass; all peripherals disabledtyp 0.69 · max 2.6 mA87
Supply current in Run mode IDD (Run)Range 2; 2 MHz; 85°C; HSE bypass; all peripherals disabledtyp 1.25 · max 6.7 mA87
Supply current in Run mode IDD (Run)Range 2; 2 MHz; 105°C; HSE bypass; all peripherals disabledtyp 2 · max 12 mA87
Supply current in Run mode IDD (Run)Range 2; 1 MHz; 25°C; HSE bypass; all peripherals disabledtyp 0.34 · max 0.83 mA87
Supply current in Run mode IDD (Run)Range 2; 1 MHz; 55°C; HSE bypass; all peripherals disabledtyp 0.55 · max 2.5 mA87
Supply current in Run mode IDD (Run)Range 2; 1 MHz; 85°C; HSE bypass; all peripherals disabledtyp 1.1 · max 6.5 mA87
Supply current in Run mode IDD (Run)Range 2; 1 MHz; 105°C; HSE bypass; all peripherals disabledtyp 1.9 · max 12 mA87
Supply current in Run mode IDD (Run)Range 2; 100 KHz; 25°C; HSE bypass; all peripherals disabledtyp 0.22 · max 0.69 mA87
Supply current in Run mode IDD (Run)Range 2; 100 KHz; 55°C; HSE bypass; all peripherals disabledtyp 0.43 · max 2.3 mA87
Supply current in Run mode IDD (Run)Range 2; 100 KHz; 85°C; HSE bypass; all peripherals disabledtyp 0.98 · max 6.3 mA87
Supply current in Run mode IDD (Run)Range 2; 100 KHz; 105°C; HSE bypass; all peripherals disabledtyp 1.75 · max 11 mA87
Supply current in Run mode IDD (Run)Range 1 Boost mode; 170 MHz; 25°C; PLL ON; all peripherals disabledtyp 29.5 · max 31 mA87
Supply current in Run mode IDD (Run)Range 1 Boost mode; 170 MHz; 55°C; PLL ON; all peripherals disabledtyp 29.5 · max 35 mA87
Supply current in Run mode IDD (Run)Range 1 Boost mode; 170 MHz; 85°C; PLL ON; all peripherals disabledtyp 31 · max 42 mA87
Supply current in Run mode IDD (Run)Range 1 Boost mode; 170 MHz; 105°C; PLL ON; all peripherals disabledtyp 32 · max 48 mA87
Supply current in Run mode IDD (Run)Range 1; 150 MHz; 25°C; PLL ON; all peripherals disabledtyp 24.5 · max 26 mA87
Supply current in Run mode IDD (Run)Range 1; 150 MHz; 55°C; PLL ON; all peripherals disabledtyp 26 · max 28 mA87
Supply current in Run mode IDD (Run)Range 1; 150 MHz; 85°C; PLL ON; all peripherals disabledtyp 27 · max 34 mA87
Supply current in Run mode IDD (Run)Range 1; 150 MHz; 105°C; PLL ON; all peripherals disabledtyp 28 · max 44 mA87
Supply current in Run mode IDD (Run)Range 1; 120 MHz; 25°C; PLL ON; all peripherals disabledtyp 19.5 · max 21 mA87
Supply current in Run mode IDD (Run)Range 1; 120 MHz; 55°C; PLL ON; all peripherals disabledtyp 20 · max 23 mA87
Supply current in Run mode IDD (Run)Range 1; 120 MHz; 85°C; PLL ON; all peripherals disabledtyp 20.5 · max 32 mA87
Supply current in Run mode IDD (Run)Range 1; 120 MHz; 105°C; PLL ON; all peripherals disabledtyp 21.5 · max 38 mA87
Supply current in Run mode IDD (Run)Range 1; 80 MHz; 25°C; PLL ON; all peripherals disabledtyp 13 · max 15 mA87
Supply current in Run mode IDD (Run)Range 1; 80 MHz; 55°C; PLL ON; all peripherals disabledtyp 13.5 · max 17 mA87
Supply current in Run mode IDD (Run)Range 1; 80 MHz; 85°C; PLL ON; all peripherals disabledtyp 14 · max 25 mA87
Supply current in Run mode IDD (Run)Range 1; 80 MHz; 105°C; PLL ON; all peripherals disabledtyp 15.5 · max 30 mA87
Supply current in Run mode IDD (Run)Range 1; 72 MHz; 25°C; PLL ON; all peripherals disabledtyp 12 · max 13 mA87
Supply current in Run mode IDD (Run)Range 1; 72 MHz; 55°C; PLL ON; all peripherals disabledtyp 12 · max 16 mA87
Supply current in Run mode IDD (Run)Range 1; 72 MHz; 85°C; PLL ON; all peripherals disabledtyp 13 · max 23 mA87
Supply current in Run mode IDD (Run)Range 1; 72 MHz; 105°C; PLL ON; all peripherals disabledtyp 14 · max 29 mA87
Supply current in Run mode IDD (Run)Range 1; 64 MHz; 25°C; PLL ON; all peripherals disabledtyp 10.5 · max 12 mA87
Supply current in Run mode IDD (Run)Range 1; 64 MHz; 55°C; PLL ON; all peripherals disabledtyp 11 · max 14 mA87
Supply current in Run mode IDD (Run)Range 1; 64 MHz; 85°C; PLL ON; all peripherals disabledtyp 11.5 · max 21 mA87
Supply current in Run mode IDD (Run)Range 1; 64 MHz; 105°C; PLL ON; all peripherals disabledtyp 12.5 · max 27 mA87
Supply current in Run mode IDD (Run)Range 1; 48 MHz; 25°C; HSE bypass; all peripherals disabledtyp 7.9 · max 9.1 mA87
Supply current in Run mode IDD (Run)Range 1; 48 MHz; 55°C; HSE bypass; all peripherals disabledtyp 8.2 · max 13 mA87
Supply current in Run mode IDD (Run)Range 1; 48 MHz; 85°C; HSE bypass; all peripherals disabledtyp 9 · max 19 mA87
Supply current in Run mode IDD (Run)Range 1; 48 MHz; 105°C; HSE bypass; all peripherals disabledtyp 9.7 · max 25 mA87
Supply current in Run mode IDD (Run)Range 1; 32 MHz; 25°C; HSE bypass; all peripherals disabledtyp 5.4 · max 6.5 mA87
Supply current in Run mode IDD (Run)Range 1; 32 MHz; 55°C; HSE bypass; all peripherals disabledtyp 5.65 · max 9.6 mA87
Supply current in Run mode IDD (Run)Range 1; 32 MHz; 85°C; HSE bypass; all peripherals disabledtyp 6.4 · max 15 mA87
Supply current in Run mode IDD (Run)Range 1; 32 MHz; 105°C; HSE bypass; all peripherals disabledtyp 7.2 · max 21 mA87
Supply current in Run mode IDD (Run)Range 1; 24 MHz; 25°C; HSE bypass; all peripherals disabledtyp 4.1 · max 5.2 mA87
Supply current in Run mode IDD (Run)Range 1; 24 MHz; 55°C; HSE bypass; all peripherals disabledtyp 4.35 · max 8 mA87
Supply current in Run mode IDD (Run)Range 1; 24 MHz; 85°C; HSE bypass; all peripherals disabledtyp 5.1 · max 14 mA87
Supply current in Run mode IDD (Run)Range 1; 24 MHz; 105°C; HSE bypass; all peripherals disabledtyp 5.95 · max 20 mA87
Supply current in Run mode IDD (Run)Range 1; 16 MHz; 25°C; HSE bypass; all peripherals disabledtyp 2.8 · max 4.3 mA87
Supply current in Run mode IDD (Run)Range 1; 16 MHz; 55°C; HSE bypass; all peripherals disabledtyp 3.1 · max 6.4 mA87
Supply current in Run mode IDD (Run)Range 1; 16 MHz; 85°C; HSE bypass; all peripherals disabledtyp 3.8 · max 12 mA87
Supply current in Run mode IDD (Run)Range 1; 16 MHz; 105°C; HSE bypass; all peripherals disabledtyp 4.7 · max 18 mA87
Supply current in Low-power run mode IDD (LPRun)HSE bypass; all peripherals disabled; 2 MHz; 25°Ctyp 455 · max 1200 uA88
Supply current in Low-power run mode IDD (LPRun)HSE bypass; all peripherals disabled; 2 MHz; 55°Ctyp 725 · max 3200 uA88
Supply current in Low-power run mode IDD (LPRun)HSE bypass; all peripherals disabled; 2 MHz; 85°Ctyp 1350 · max 8100 uA88
Supply current in Low-power run mode IDD (LPRun)HSE bypass; all peripherals disabled; 2 MHz; 105°Ctyp 2250 · max 14000 uA88
Supply current in Low-power run mode IDD (LPRun)HSE bypass; all peripherals disabled; 1 MHz; 25°Ctyp 280 · max 1100 uA88
Supply current in Low-power run mode IDD (LPRun)HSE bypass; all peripherals disabled; 1 MHz; 55°Ctyp 545 · max 3000 uA88
Supply current in Low-power run mode IDD (LPRun)HSE bypass; all peripherals disabled; 1 MHz; 85°Ctyp 1200 · max 7900 uA88
Supply current in Low-power run mode IDD (LPRun)HSE bypass; all peripherals disabled; 1 MHz; 105°Ctyp 2100 · max 14000 uA88
Supply current in Low-power run mode IDD (LPRun)HSE bypass; all peripherals disabled; 250 KHz; 25°Ctyp 160 · max 840 uA88
Supply current in Low-power run mode IDD (LPRun)HSE bypass; all peripherals disabled; 250 KHz; 55°Ctyp 435 · max 2800 uA88
Supply current in Low-power run mode IDD (LPRun)HSE bypass; all peripherals disabled; 250 KHz; 85°Ctyp 1100 · max 7700 uA88
Supply current in Low-power run mode IDD (LPRun)HSE bypass; all peripherals disabled; 250 KHz; 105°Ctyp 2000 · max 14000 uA88
Supply current in Low-power run mode IDD (LPRun)HSE bypass; all peripherals disabled; 62.5 KHz; 25°Ctyp 130 · max 810 uA88
Supply current in Low-power run mode IDD (LPRun)HSE bypass; all peripherals disabled; 62.5 KHz; 55°Ctyp 405 · max 2700 uA88
Supply current in Low-power run mode IDD (LPRun)HSE bypass; all peripherals disabled; 62.5 KHz; 85°Ctyp 1050 · max 7600 uA88
Supply current in Low-power run mode IDD (LPRun)HSE bypass; all peripherals disabled; 62.5 KHz; 105°Ctyp 1950 · max 14000 uA88
Supply current in Low-power run mode IDD (LPRun)HSI16; all peripherals disabled; 2 MHz; 25°Ctyp 920 · max 1900 uA88
Supply current in Low-power run mode IDD (LPRun)HSI16; all peripherals disabled; 2 MHz; 55°Ctyp 1200 · max 3800 uA88
Supply current in Low-power run mode IDD (LPRun)HSI16; all peripherals disabled; 2 MHz; 85°Ctyp 1850 · max 8700 uA88
Supply current in Low-power run mode IDD (LPRun)HSI16; all peripherals disabled; 2 MHz; 105°Ctyp 2750 · max 15000 uA88
Supply current in Low-power run mode IDD (LPRun)HSI16; all peripherals disabled; 1 MHz; 25°Ctyp 780 · max 1700 uA88
Supply current in Low-power run mode IDD (LPRun)HSI16; all peripherals disabled; 1 MHz; 55°Ctyp 1100 · max 3700 uA88
Supply current in Low-power run mode IDD (LPRun)HSI16; all peripherals disabled; 1 MHz; 85°Ctyp 1700 · max 8600 uA88
Supply current in Low-power run mode IDD (LPRun)HSI16; all peripherals disabled; 1 MHz; 105°Ctyp 2650 · max 14000 uA88
Supply current in Low-power run mode IDD (LPRun)HSI16; all peripherals disabled; 250 KHz; 25°Ctyp 725 · max 1600 uA88
Supply current in Low-power run mode IDD (LPRun)HSI16; all peripherals disabled; 250 KHz; 55°Ctyp 980 · max 3600 uA88
Supply current in Low-power run mode IDD (LPRun)HSI16; all peripherals disabled; 250 KHz; 85°Ctyp 1600 · max 8400 uA88
Supply current in Low-power run mode IDD (LPRun)HSI16; all peripherals disabled; 250 KHz; 105°Ctyp 2500 · max 14000 uA88
Supply current in Low-power run mode IDD (LPRun)HSI16; all peripherals disabled; 62.5 KHz; 25°Ctyp 720 · max 1500 uA88
Supply current in Low-power run mode IDD (LPRun)HSI16; all peripherals disabled; 62.5 KHz; 55°Ctyp 955 · max 3500 uA88
Supply current in Low-power run mode IDD (LPRun)HSI16; all peripherals disabled; 62.5 KHz; 85°Ctyp 1600 · max 8400 uA88
Supply current in Low-power run mode IDD (LPRun)HSI16; all peripherals disabled; 62.5 KHz; 105°Ctyp 2500 · max 14000 uA88
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 1.8 V; 25°Ctyp 190 · max 790 uA101
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 1.8 V; 55°Ctyp 380 · max 2400 uA101
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 1.8 V; 85°Ctyp 980 · max 6500 uA101
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 1.8 V; 105°Ctyp 1750 · max 11000 uA101
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 2.4 V; 25°Ctyp 190 · max 790 uA101
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 2.4 V; 55°Ctyp 380 · max 2400 uA101
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 2.4 V; 85°Ctyp 985 · max 6400 uA101
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 2.4 V; 105°Ctyp 1750 · max 11000 uA101
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 3 V; 25°Ctyp 190 · max 800 uA101
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 3 V; 55°Ctyp 380 · max 2400 uA101
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 3 V; 85°Ctyp 985 · max 6500 uA101
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 3 V; 105°Ctyp 1750 · max 12000 uA101
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 3.6 V; 25°Ctyp 190 · max 800 uA101
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 3.6 V; 55°Ctyp 380 · max 2500 uA101
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 3.6 V; 85°Ctyp 985 · max 6500 uA101
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 3.6 V; 105°Ctyp 1750 · max 12000 uA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)No independent watchdog; VDD = 1.8 V; 25°Ctyp 100 · max 200 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)No independent watchdog; VDD = 1.8 V; 55°Ctyp 275 · max 1100 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)No independent watchdog; VDD = 1.8 V; 85°Ctyp 1350 · max 4100 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)No independent watchdog; VDD = 1.8 V; 105°Ctyp 3450 · max 9700 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)No independent watchdog; VDD = 2.4 V; 25°Ctyp 110 · max 220 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)No independent watchdog; VDD = 2.4 V; 55°Ctyp 325 · max 1200 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)No independent watchdog; VDD = 2.4 V; 85°Ctyp 1600 · max 4800 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)No independent watchdog; VDD = 2.4 V; 105°Ctyp 4100 · max 12000 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)No independent watchdog; VDD = 3 V; 25°Ctyp 130 · max 240 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)No independent watchdog; VDD = 3 V; 55°Ctyp 385 · max 1400 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)No independent watchdog; VDD = 3 V; 85°Ctyp 1900 · max 5500 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)No independent watchdog; VDD = 3 V; 105°Ctyp 4850 · max 13000 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)No independent watchdog; VDD = 3.6 V; 25°Ctyp 180 · max 360 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)No independent watchdog; VDD = 3.6 V; 55°Ctyp 530 · max 1700 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)No independent watchdog; VDD = 3.6 V; 85°Ctyp 2400 · max 6300 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)No independent watchdog; VDD = 3.6 V; 105°Ctyp 6050 · max 15000 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)With independent watchdog; VDD = 1.8 V; 25°Ctyp 300 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)With independent watchdog; VDD = 2.4 V; 25°Ctyp 365 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)With independent watchdog; VDD = 3 V; 25°Ctyp 435 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby)With independent watchdog; VDD = 3.6 V; 25°Ctyp 545 nA101
Supply current during wakeup from Standby mode IDD (wakeup from Standby)VDD = 3 V; 25°C; wakeup clock HSI16 = 16 MHz; code execution from Flash; average for typical wakeup timetyp 2.46 mA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 1.8 V; 25°Ctyp 19 · max 78 nA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 1.8 V; 55°Ctyp 140 · max 490 nA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 1.8 V; 85°Ctyp 885 · max 3100 nA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 1.8 V; 105°Ctyp 2500 · max 8100 nA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 2.4 V; 25°Ctyp 28 · max 94 nA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 2.4 V; 55°Ctyp 180 · max 570 nA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 2.4 V; 85°Ctyp 1050 · max 3600 nA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 2.4 V; 105°Ctyp 2950 · max 9300 nA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 3 V; 25°Ctyp 43 · max 130 nA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 3 V; 55°Ctyp 230 · max 680 nA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 3 V; 85°Ctyp 1300 · max 4100 nA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 3 V; 105°Ctyp 3600 · max 11000 nA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 3.6 V; 25°Ctyp 87 · max 190 nA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 3.6 V; 55°Ctyp 360 · max 870 nA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 3.6 V; 85°Ctyp 1750 · max 4900 nA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown)VDD = 3.6 V; 105°Ctyp 4700 · max 13000 nA103
Thermal resistance junction-ambient ΘJAUFQFPN48 - 7 × 7 mm; Value columntyp 26.8 °C/W222
Analog supply voltage VDDAADC or COMP usedmin 1.62 V81
Analog supply voltage VDDADAC 1 MSPS or DAC 15 MSPSmin 1.71 V81
Analog supply voltage VDDAVREFBUF usedmin 2.4 V81
I/O input voltage VINTT_xx; maximum VDD+0.3min -0.3 V81
Ambient temperature for the suffix 6 version TALow-power dissipation(4)min -40 · max 105 °C81
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 1.8 V, 25°Ctyp 190 · max 790 uA101
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 1.8 V, 55°Ctyp 380 · max 2400 uA101
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 1.8 V, 85°Ctyp 980 · max 6500 uA101
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 1.8 V, 105°Ctyp 1750 · max 11000 uA101
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 1.8 V, 125°Ctyp 3100 · max 19000 uA101
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 2.4 V, 25°Ctyp 190 · max 790 uA101
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 2.4 V, 55°Ctyp 380 · max 2400 uA101
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 2.4 V, 85°Ctyp 985 · max 6400 uA101
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 2.4 V, 105°Ctyp 1750 · max 11000 uA101
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 2.4 V, 125°Ctyp 3100 · max 19000 uA101
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 3 V, 25°Ctyp 190 · max 800 uA101
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 3 V, 55°Ctyp 380 · max 2400 uA101
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 3 V, 85°Ctyp 985 · max 6500 uA101
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 3 V, 105°Ctyp 1750 · max 12000 uA101
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 3 V, 125°Ctyp 3100 · max 19000 uA101
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 3.6 V, 25°Ctyp 190 · max 800 uA101
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 3.6 V, 55°Ctyp 380 · max 2500 uA101
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 3.6 V, 85°Ctyp 985 · max 6500 uA101
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 3.6 V, 105°Ctyp 1750 · max 12000 uA101
Supply current in Stop 0 mode, RTC disabled IDD(Stop 0)VDD = 3.6 V, 125°C; maximum printed on preceding linetyp 3100 uA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD(Standby)No independent watchdog, VDD = 1.8 V, 25°Ctyp 100 · max 200 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD(Standby)No independent watchdog, VDD = 1.8 V, 55°Ctyp 275 · max 1100 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD(Standby)No independent watchdog, VDD = 1.8 V, 85°Ctyp 1350 · max 4100 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD(Standby)No independent watchdog, VDD = 1.8 V, 105°Ctyp 3450 · max 9700 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD(Standby)No independent watchdog, VDD = 1.8 V, 125°Ctyp 8450 · max 27000 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD(Standby)No independent watchdog, VDD = 2.4 V, 25°Ctyp 110 · max 220 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD(Standby)No independent watchdog, VDD = 2.4 V, 55°Ctyp 325 · max 1200 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD(Standby)No independent watchdog, VDD = 2.4 V, 85°Ctyp 1600 · max 4800 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD(Standby)No independent watchdog, VDD = 2.4 V, 105°Ctyp 4100 · max 12000 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD(Standby)No independent watchdog, VDD = 2.4 V, 125°Ctyp 10000 · max 31000 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD(Standby)No independent watchdog, VDD = 3.6 V, 25°Ctyp 180 · max 360 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD(Standby)No independent watchdog, VDD = 3.6 V, 55°Ctyp 530 · max 1700 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD(Standby)No independent watchdog, VDD = 3.6 V, 85°Ctyp 2400 · max 6300 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD(Standby)No independent watchdog, VDD = 3.6 V, 105°Ctyp 6050 · max 15000 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD(Standby)No independent watchdog, VDD = 3.6 V, 125°C; maximum printed on preceding linetyp 14500 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD(Standby)With independent watchdog, VDD = 1.8 V, 25°Ctyp 300 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD(Standby)With independent watchdog, VDD = 2.4 V, 25°Ctyp 365 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD(Standby)With independent watchdog, VDD = 3 V, 25°Ctyp 435 nA101
Supply current in Standby mode (backup registers retained), RTC disabled IDD(Standby)With independent watchdog, VDD = 3.6 V, 25°Ctyp 545 nA101
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 1.8 V, 25°Ctyp 540 · max 660 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 1.8 V, 55°Ctyp 725 · max 1500 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 1.8 V, 85°Ctyp 1800 · max 4600 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 1.8 V, 105°Ctyp 3850 · max 11000 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 1.8 V, 125°Ctyp 8850 · max 27000 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 2.4 V, 25°Ctyp 700 · max 860 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 2.4 V, 55°Ctyp 920 · max 1900 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 2.4 V, 85°Ctyp 2150 · max 5300 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 2.4 V, 105°Ctyp 4650 · max 12000 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 2.4 V, 125°Ctyp 10500 · max 31000 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 3 V, 25°Ctyp 885 · max 1100 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 3 V, 55°Ctyp 1150 · max 2200 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 3 V, 85°Ctyp 2650 · max 6300 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 3 V, 105°Ctyp 5550 · max 14000 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 3 V, 125°Ctyp 12500 · max 36000 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 3.6 V, 25°Ctyp 1100 · max 1400 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 3.6 V, 55°Ctyp 1450 · max 2700 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 3.6 V, 85°Ctyp 3350 · max 7400 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 3.6 V, 105°Ctyp 7000 · max 16000 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSI, no independent watchdog, VDD = 3.6 V, 125°Ctyp 15500 · max 41000 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSI, with independent watchdog, VDD = 1.8 V, 25°Ctyp 580 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSI, with independent watchdog, VDD = 2.4 V, 25°Ctyp 760 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSI, with independent watchdog, VDD = 3 V, 25°Ctyp 960 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSI, with independent watchdog, VDD = 3.6 V, 25°Ctyp 1200 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 1.8 V, 25°Ctyp 410 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 1.8 V, 55°Ctyp 580 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 1.8 V, 85°Ctyp 1600 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 1.8 V, 105°Ctyp 3650 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 1.8 V, 125°Ctyp 8600 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 2.4 V, 25°Ctyp 545 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 2.4 V, 55°Ctyp 750 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 2.4 V, 85°Ctyp 1950 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 2.4 V, 105°Ctyp 4450 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 2.4 V, 125°Ctyp 10500 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 3 V, 25°Ctyp 830 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 3 V, 55°Ctyp 1150 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 3 V, 85°Ctyp 2750 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 3 V, 105°Ctyp 5800 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 3 V, 125°Ctyp 13000 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 3.6 V, 25°Ctyp 2200 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 3.6 V, 55°Ctyp 3050 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 3.6 V, 85°Ctyp 5550 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 3.6 V, 105°Ctyp 9550 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 3.6 V, 125°Ctyp 18000 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 1.8 V, 25°Ctyp 370 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 1.8 V, 55°Ctyp 570 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 1.8 V, 85°Ctyp 1350 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 1.8 V, 105°Ctyp 3150 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 1.8 V, 125°Ctyp 7100 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 2.4 V, 25°Ctyp 495 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 2.4 V, 55°Ctyp 715 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 2.4 V, 85°Ctyp 1650 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 2.4 V, 105°Ctyp 3800 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 2.4 V, 125°Ctyp 8350 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 3 V, 25°Ctyp 655 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 3 V, 55°Ctyp 915 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 3 V, 85°Ctyp 2100 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 3 V, 105°Ctyp 4550 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 3 V, 125°Ctyp 9850 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 3.6 V, 25°Ctyp 875 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 3.6 V, 55°Ctyp 1350 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 3.6 V, 85°Ctyp 2800 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 3.6 V, 105°Ctyp 5750 nA102
Supply current in Standby mode (backup registers retained), RTC enabled IDD(Standby with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 3.6 V, 125°Ctyp 12000 nA102
Supply current to be added in Standby mode when SRAM2 is retained IDD(SRAM2)VDD = 1.8 V, 25°Ctyp 300 nA102
Supply current to be added in Standby mode when SRAM2 is retained IDD(SRAM2)VDD = 1.8 V, 55°Ctyp 825 nA102
Supply current to be added in Standby mode when SRAM2 is retained IDD(SRAM2)VDD = 1.8 V, 85°Ctyp 2950 nA102
Supply current to be added in Standby mode when SRAM2 is retained IDD(SRAM2)VDD = 1.8 V, 105°Ctyp 6300 nA102
Supply current to be added in Standby mode when SRAM2 is retained IDD(SRAM2)VDD = 1.8 V, 125°Ctyp 12550 nA102
Supply current to be added in Standby mode when SRAM2 is retained IDD(SRAM2)VDD = 2.4 V, 25°Ctyp 305 nA102
Supply current to be added in Standby mode when SRAM2 is retained IDD(SRAM2)VDD = 2.4 V, 55°Ctyp 875 nA102
Supply current to be added in Standby mode when SRAM2 is retained IDD(SRAM2)VDD = 2.4 V, 85°Ctyp 2900 nA102
Supply current to be added in Standby mode when SRAM2 is retained IDD(SRAM2)VDD = 2.4 V, 105°Ctyp 6400 nA102
Supply current to be added in Standby mode when SRAM2 is retained IDD(SRAM2)VDD = 2.4 V, 125°Ctyp 12500 nA102
Supply current to be added in Standby mode when SRAM2 is retained IDD(SRAM2)VDD = 3 V, 25°Ctyp 305 nA102
Supply current to be added in Standby mode when SRAM2 is retained IDD(SRAM2)VDD = 3 V, 55°Ctyp 865 nA102
Supply current to be added in Standby mode when SRAM2 is retained IDD(SRAM2)VDD = 3 V, 85°Ctyp 2950 nA102
Supply current to be added in Standby mode when SRAM2 is retained IDD(SRAM2)VDD = 3 V, 105°Ctyp 6150 nA102
Supply current to be added in Standby mode when SRAM2 is retained IDD(SRAM2)VDD = 3 V, 125°Ctyp 12500 nA102
Supply current to be added in Standby mode when SRAM2 is retained IDD(SRAM2)VDD = 3.6 V, 25°Ctyp 310 nA102
Supply current to be added in Standby mode when SRAM2 is retained IDD(SRAM2)VDD = 3.6 V, 55°Ctyp 870 nA102
Supply current to be added in Standby mode when SRAM2 is retained IDD(SRAM2)VDD = 3.6 V, 85°Ctyp 3000 nA102
Supply current to be added in Standby mode when SRAM2 is retained IDD(SRAM2)VDD = 3.6 V, 105°Ctyp 6450 nA102
Supply current to be added in Standby mode when SRAM2 is retained IDD(SRAM2)VDD = 3.6 V, 125°Ctyp 13000 nA102
Supply current during wakeup from Standby mode IDD (wakeup from Standby)VDD = 3 V, 25°C, wakeup clock HSI16 = 16 MHz, code execution from Flashtyp 2.46 mA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown)VDD = 1.8 V, 25°Ctyp 19 · max 78 nA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown)VDD = 1.8 V, 55°Ctyp 140 · max 490 nA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown)VDD = 1.8 V, 85°Ctyp 885 · max 3100 nA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown)VDD = 1.8 V, 105°Ctyp 2500 · max 8100 nA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown)VDD = 1.8 V, 125°Ctyp 6600 · max 24000 nA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown)VDD = 2.4 V, 25°Ctyp 28 · max 94 nA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown)VDD = 2.4 V, 55°Ctyp 180 · max 570 nA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown)VDD = 2.4 V, 85°Ctyp 1050 · max 3600 nA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown)VDD = 2.4 V, 105°Ctyp 2950 · max 9300 nA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown)VDD = 2.4 V, 125°Ctyp 7800 · max 27000 nA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown)VDD = 3 V, 25°Ctyp 43 · max 130 nA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown)VDD = 3 V, 55°Ctyp 230 · max 680 nA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown)VDD = 3 V, 85°Ctyp 1300 · max 4100 nA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown)VDD = 3 V, 105°Ctyp 3600 · max 11000 nA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown)VDD = 3 V, 125°Ctyp 9300 · max 31000 nA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown)VDD = 3.6 V, 25°Ctyp 87 · max 190 nA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown)VDD = 3.6 V, 55°Ctyp 360 · max 870 nA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown)VDD = 3.6 V, 85°Ctyp 1750 · max 4900 nA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown)VDD = 3.6 V, 105°Ctyp 4700 · max 13000 nA103
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD(Shutdown)VDD = 3.6 V, 125°Ctyp 12000 · max 35000 nA103
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 1.8 V, 25°Ctyp 330 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 1.8 V, 55°Ctyp 445 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 1.8 V, 85°Ctyp 1150 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 1.8 V, 105°Ctyp 2700 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 1.8 V, 125°Ctyp 6800 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 2.4 V, 25°Ctyp 460 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 2.4 V, 55°Ctyp 605 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 2.4 V, 85°Ctyp 1450 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 2.4 V, 105°Ctyp 3350 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 2.4 V, 125°Ctyp 8150 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 3 V, 25°Ctyp 745 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 3 V, 55°Ctyp 1000 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 3 V, 85°Ctyp 2200 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 3 V, 105°Ctyp 4550 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 3 V, 125°Ctyp 10500 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 3.6 V, 25°Ctyp 2100 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 3.6 V, 55°Ctyp 2850 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 3.6 V, 85°Ctyp 4900 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 3.6 V, 105°Ctyp 8150 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE bypassed at 32768 Hz, VDD = 3.6 V, 125°Ctyp 15500 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 1.8 V, 25°Ctyp 285 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 1.8 V, 55°Ctyp 450 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 1.8 V, 85°Ctyp 1050 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 1.8 V, 105°Ctyp 2500 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 2.4 V, 25°Ctyp 410 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 2.4 V, 55°Ctyp 585 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 2.4 V, 85°Ctyp 1300 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 2.4 V, 105°Ctyp 3050 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 3 V, 25°Ctyp 565 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 3 V, 55°Ctyp 770 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 3 V, 85°Ctyp 1750 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 3 V, 105°Ctyp 3750 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 3.6 V, 25°Ctyp 780 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 3.6 V, 55°Ctyp 1200 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 3.6 V, 85°Ctyp 2400 nA104
Supply current in Shutdown mode (backup registers retained) RTC enabled IDD(Shutdown with RTC)RTC clocked by LSE quartz in low drive mode, VDD = 3.6 V, 105°Ctyp 4850 nA104
Supply current during wakeup from Shutdown mode IDD(wakeup from Shutdown)VDD = 3 V, 25°C, wakeup clock HSI16 = 16 MHz, code execution from Flashtyp 1.6 mA104
Bus MatrixRange 1 Boost modetyp 6.12 uA/MHz107
Bus MatrixRange 1 Normal modetyp 5.69 uA/MHz107
Bus MatrixRange 2typ 4.7 uA/MHz107
Bus MatrixLow-power run and sleeptyp 6.11 uA/MHz107
AHB1 to APB1 bridgeRange 1 Boost modetyp 0.26 uA/MHz107
AHB1 to APB1 bridgeRange 1 Normal modetyp 0.25 uA/MHz107
AHB1 to APB1 bridgeRange 2typ 0.22 uA/MHz107
AHB1 to APB1 bridgeLow-power run and sleeptyp 0.03 uA/MHz107
AHB1 to APB2 bridgeRange 1 Boost modetyp 0.39 uA/MHz107
AHB1 to APB2 bridgeRange 1 Normal modetyp 0.37 uA/MHz107
AHB1 to APB2 bridgeRange 2typ 0.32 uA/MHz107
AHB1 to APB2 bridgeLow-power run and sleeptyp 0.03 uA/MHz107
FSMCRange 1 Boost modetyp 10.21 uA/MHz107
FSMCRange 1 Normal modetyp 9.52 uA/MHz107
FSMCRange 2typ 7.87 uA/MHz107
FSMCLow-power run and sleeptyp 10.28 uA/MHz107
QUADSPIRange 1 Boost modetyp 3.51 uA/MHz107
QUADSPIRange 1 Normal modetyp 3.27 uA/MHz107
QUADSPIRange 2typ 2.69 uA/MHz107
QUADSPILow-power run and sleeptyp 3.51 uA/MHz107
CORDICRange 1 Boost modetyp 1.28 uA/MHz107
CORDICRange 1 Normal modetyp 1.19 uA/MHz107
CORDICRange 2typ 0.98 uA/MHz107
CORDICLow-power run and sleeptyp 0.78 uA/MHz107
CRCRange 1 Boost modetyp 0.74 uA/MHz107
CRCRange 1 Normal modetyp 0.68 uA/MHz107
CRCRange 2typ 0.57 uA/MHz107
CRCLow-power run and sleeptyp 0.63 uA/MHz107
DMA 1AHB1, Range 1 Boost modetyp 2.83 uA/MHz107
DMA 1AHB1, Range 1 Normal modetyp 2.64 uA/MHz107
DMA 1AHB1, Range 2typ 2.17 uA/MHz107
DMA 1AHB1, Low-power run and sleeptyp 2.75 uA/MHz107
DMA 2AHB1, Range 1 Boost modetyp 3.11 uA/MHz107
DMA 2AHB1, Range 1 Normal modetyp 2.9 uA/MHz107
DMA 2AHB1, Range 2typ 2.39 uA/MHz107
DMA 2AHB1, Low-power run and sleeptyp 2.43 uA/MHz107
DMAMUXAHB1, Range 1 Boost modetyp 6.71 uA/MHz107
DMAMUXAHB1, Range 1 Normal modetyp 6.26 uA/MHz107
DMAMUXAHB1, Range 2typ 5.17 uA/MHz107
DMAMUXAHB1, Low-power run and sleeptyp 6.68 uA/MHz107
SRAM1AHB1, Range 1 Boost modetyp 0.58 uA/MHz107
SRAM1AHB1, Range 1 Normal modetyp 0.54 uA/MHz107
SRAM1AHB1, Range 2typ 0.44 uA/MHz107
SRAM1AHB1, Low-power run and sleeptyp 0.54 uA/MHz107
FLASHAHB1, Range 1 Boost modetyp 6.46 uA/MHz107
FLASHAHB1, Range 1 Normal modetyp 6.01 uA/MHz107
FLASHAHB1, Range 2typ 4.95 uA/MHz107
FLASHAHB1, Low-power run and sleeptyp 6.15 uA/MHz107
FMACAHB1, Range 1 Boost modetyp 4.59 uA/MHz107
FMACAHB1, Range 1 Normal modetyp 4.29 uA/MHz107
FMACAHB1, Range 2typ 3.57 uA/MHz107
FMACAHB1, Low-power run and sleeptyp 3.83 uA/MHz107
Wakeup time from Sleep mode to Run mode tWUSLEEP-typ 11 · max 12 Nb of CPU cycles112
Wakeup time from Low-power sleep mode to Low-power run mode tWULPSLEEP-typ 10 · max 11 Nb of CPU cycles112
Wake up time from Stop 0 mode to Run mode in Flash tWUSTOP0Range 2, Wakeup clock HSI16 = 16 MHztyp 18.4 · max 19.1 us112
Wake up time from Stop 0 mode to Run mode in SRAM1 tWUSTOP0Range 1, Wakeup clock HSI16 = 16 MHztyp 2.8 · max 3 us112
Wake up time from Stop 0 mode to Run mode in SRAM1 tWUSTOP0Range 2, Wakeup clock HSI16 = 16 MHztyp 2.9 · max 3 us112
Wake up time from Stop 1 mode to Run in Flash tWUSTOP1Range 1, Wakeup clock HSI16 = 16 MHztyp 9.5 · max 9.8 us112
Wake up time from Stop 1 mode to Run in Flash tWUSTOP1Range 2, Wakeup clock HSI16 = 16 MHztyp 21.9 · max 22.7 us112
Wake up time from Stop 1 mode to Run mode in SRAM1 tWUSTOP1Range 1, Wakeup clock HSI16 = 16 MHztyp 6.6 · max 6.9 us112
Wake up time from Stop 1 mode to Run mode in SRAM1 tWUSTOP1Range 2, Wakeup clock HSI16 = 16 MHztyp 6.4 · max 6.6 us112
Wake up time from Stop 1 mode to Low-power run mode in SRAM1 tWUSTOP1Regulator in low-power mode (LPR=1 in PWR_CR1), Wakeup clock HSI16 = 16 MHz, HPRE = 8typ 14.4 · max 15 us112
Wakeup time from Standby mode to Run mode tWUSTBYRange 1, Wakeup clock HSI16 = 16 MHztyp 29.7 · max 33.8 us112
Wakeup time from Standby with SRAM2 to Run mode tWUSTBY SRAM2Range 1, Wakeup clock HSI16 = 16 MHztyp 29.7 · max 33.5 us112
Wakeup time from Shutdown mode to Run mode tWUSHDNRange 1, Wakeup clock HSI16 = 16 MHztyp 267.9 · max 274.6 us112
Wakeup time from Low-power run mode to Run mode tWULPRUNWakeup clock HSI16 = 16 MHz with HPRE = 8; time until REGLPF flag is cleared in PWR_SR2typ 5 · max 7 us112
Oscillator frequency fOSC_IN-min 4 · typ 8 · max 48 MHz115
Feedback resistor RF-typ 200 kΩ115
HSE current consumption IDD(HSE)During startupmax 5.5 mA115
HSE current consumption IDD(HSE)VDD = 3 V, Rm = 30 Ω, CL = 10 pF@8 MHztyp 0.44 mA115
HSE current consumption IDD(HSE)VDD = 3 V, Rm = 45 Ω, CL = 10 pF@8 MHztyp 0.45 mA115
HSE current consumption IDD(HSE)VDD = 3 V, Rm = 30 Ω, CL = 5 pF@48 MHztyp 0.68 mA115
HSE current consumption IDD(HSE)VDD = 3 V, Rm = 30 Ω, CL = 10 pF@48 MHztyp 0.94 mA115
HSE current consumption IDD(HSE)VDD = 3 V, Rm = 30 Ω, CL = 20 pF@48 MHztyp 1.77 mA115
Maximum critical crystal transconductance GmStartupmax 1.5 mA/V115
Startup time tSU(HSE)VDD is stabilizedtyp 2 ms115
Electrostatic discharge voltage (human body model) VESD(HBM)TA = +25 °C, ANSI/ESDA/JEDEC JS-001, Class 2max 2000 V124
Electrostatic discharge voltage (charge device model) VESD(CDM)UFQFPN48 (Other packages), TA = +25 °C, ANSI/ESDA/JEDEC JS-002, Class C2amax 500 V124
Output low level voltage for an I/O pin VOLCMOS port, |IIO| = 2 mA for FT_c I/Os, 8 mA for other I/Os, VDD ≥ 2.7 Vmax 0.4 V128
Output low level voltage for an I/O pin VOLTTL port, |IIO| = 2 mA for FT_c I/Os, 8 mA for other I/Os, VDD ≥ 2.7 Vmax 0.4 V128
Output high level voltage for an I/O pin VOHTTL port, |IIO| = 2 mA for FT_c I/Os, 8 mA for other I/Os, VDD ≥ 2.7 Vmin 2.4 V128
Output low level voltage for an I/O pin VOLAll I/Os except FT_c, |IIO| = 20 mA, VDD ≥ 2.7 Vmax 1.3 V128
Output low level voltage for an I/O pin VOL|IIO| = 1 mA for FT_c I/Os, 4 mA for other I/Os, VDD ≥ 1.62 Vmax 0.4 V128
Output low level voltage for an FT I/O pin in FM+ mode (FT I/O with “f” option) VOLFM+|IIO| = 20 mA, VDD ≥ 2.7 Vmax 0.4 V128
Output low level voltage for an FT I/O pin in FM+ mode (FT I/O with “f” option) VOLFM+|IIO| = 10 mA, VDD ≥ 1.62 Vmax 0.4 V128
Maximum frequency FmaxFM+, C=50 pF, 1.6 V≤VDD≤3.6 Vmax 1 MHz130
Output high to low level fall time Tr/TFFM+, C=50 pF, 1.6 V≤VDD≤3.6 Vmax 5 ns130
Maximum frequency FmaxSpeed 0, C=50 pF, 2.7 V≤VDD≤3.6 Vmax 2 MHz130
Maximum frequency FmaxSpeed 0, C=50 pF, 1.6 V≤VDD≤2.7 Vmax 1 MHz130
Output H/L to L/H level fall time Tr/TfSpeed 0, C=50 pF, 2.7 V≤VDD≤3.6 Vmax 170 ns130
Output H/L to L/H level fall time Tr/TfSpeed 0, C=50 pF, 1.6 V≤VDD≤2.7 Vmax 330 ns130
Maximum frequency FmaxSpeed 1, C=50 pF, 2.7 V≤VDD≤3.6 Vmax 10 MHz130
Maximum frequency FmaxSpeed 1, C=50 pF, 1.6 V≤VDD≤2.7 Vmax 5 MHz130
Output H/L to L/H level fall time Tr/TfSpeed 1, C=50 pF, 2.7 V≤VDD≤3.6 Vmax 35 ns130
Output H/L to L/H level fall time Tr/TfSpeed 1, C=50 pF, 1.6 V≤VDD≤2.7 Vmax 65 ns130
USB transceiver operating voltage VDDTA = -40 to 125 °Cmin 3 · max 3.6 V174
USB crystal less operation temperature tCrystal_lessmin -15 · max 85 °C174
Embedded USB_DP pull-up value during idle RPUITA = -40 to 125 °Cmin 900 · typ 1250 · max 1500 Ω174
Embedded USB_PD pull-up value during reception RPURTA = -40 to 125 °Cmin 1400 · typ 2300 · max 3200 Ω174
Output driver impedance ZsDRVDriving high and low, TA = -40 to 125 °Cmin 28 · typ 36 · max 44 Ω174
USART clock frequency fCKMaster mode, OSPEEDRy[1:0] = 10, C=30 pF, measurement at 0.5 VDDmax 21 MHz174
USART clock frequency fCKSlave mode, OSPEEDRy[1:0] = 10, C=30 pF, measurement at 0.5 VDDmax 22 MHz174
NSS hold time th(NSS)Slave modemin 2 ns174
Data input setup time tsu(RX)Slave modemin 2 ns174
Data input hold time th(RX)Master modemin 1 ns174
Data input hold time th(RX)Slave modemin 0.5 ns174
Thermal resistance junction-ambient ΘJAUFQFPN48 - 7 × 7 mm; table gives an unqualified Valuetyp 26.8 °C/W222

Parameters

18
ADC (Bit)
12bit
CPU Core
ARM Cortex-M4
CPU Maximum Speed
170MHz
Core Size
32 Bit
Current - Supply
29.5mA
Current - Supply(Max)
48mA
DAC (Bit)
12bit
Junction Temperature(Max)
105℃
Number of I/O
42
Operating Temperature
-40℃~+105℃
Oscillator Type
Built-in
Output Current per Pin(Max)
20mA
Program Memory Type
FLASH
Program Storage Size
512KB
RAM Size
128KB
Standby Current
130nA
Voltage - Supply
1.55V~3.6V
Voltage - Supply(Absolute Max)
4V

Order codes

1

Pinout

49
The pins of the STM32G473CEU6
PinNameType
1VBATPower in
2PC13Input/output
3PC14Input/output
4PC15Input/output
5PF0Input/output
6PF1Input/output
7PG10Input/output
8PA0Input/output
9PA1Input/output
10PA2Input/output
11PA3Input/output
12PA4Input/output
13PA5Input/output
14PA6Input/output
15PA7Input/output
16PC4Input/output
17PB0Input/output
18PB1Input/output
19PB2Input/output
20VREF+Input
21VDDAPower in
22PB10Input/output
23VDDPower in
24PB11Input/output
25PB12Input/output
26PB13Input/output
27PB14Input/output
28PB15Input/output
29PC6Input/output
30PA8Input/output
31PA9Input/output
32PA10Input/output
33PA11Input/output
34PA12Input/output
35VDDPower in
36PA13Input/output
37PA14Input/output
38PA15Input/output
39PC10Input/output
40PC11Input/output
41PB3Input/output
42PB4Input/output
43PB5Input/output
44PB6Input/output
45PB7Input/output
46PB8Input/output
47PB9Input/output
48VDDPower in
49VSSPower in

Open-source boards using it

All 5
  • 4 layers20 × 30 mmMicro17, the printed circuit board in 3D

    Micro17

    M17-Project/Micro17

    M17 baseband processor board - OpenRTX on a Module

    93 parts20
  • 4 layers40 × 40 mmAtmos fc, the printed circuit board in 3D

    Atmos fc

    cypamigon/atmos_fc

    Drone flight controller based on STM32G4 with IMU (ICM-468-P), barometer (DPS-386), OSD (MAX7456) and 32MB flash memory for blackbox logging — running Betaflight.

    112 parts1MIT
  • 8 layers38 × 38 mmRidge3-lite, the printed circuit board in 3D

    Ridge3-lite

    offgridevices/offgrid-hardware

    Open hardware from OffGrid Devices. One folder per board. CERN-OHL-S.

    260 partsCERN-OHL-S-2.0
  • 2 layers30 × 46 mmXESC, the printed circuit board in 3D

    XESC

    embeddedalpha/PCB-Design

    Repository for PCB Design Projects

    93 parts77MIT
  • 6 layers36 × 36 mmRidge3-fc, the printed circuit board in 3D

    Ridge3-fc

    offgridevices/offgrid-hardware

    Open hardware from OffGrid Devices. One folder per board. CERN-OHL-S.

    124 partsCERN-OHL-S-2.0

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/st/STM32G473CEU6" title="STM32G473CEU6 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/st/STM32G473CEU6.jpg" alt="STM32G473CEU6" width="1200" height="900">
A picture that opens the part, for a README
[![STM32G473CEU6](https://pcbkit.io/embed/parts/st/STM32G473CEU6.jpg?size=s)](https://pcbkit.io/parts/st/STM32G473CEU6)

Questions

Is there a KiCad symbol and footprint for the STM32G473CEU6?

Yes. The symbol is MCU_ST_STM32G4:STM32G473CEUx and the footprint Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the STM32G473CEU6?

UFQFPN-48(7x7), with 49 pins. Its footprint is drawn on this page.

Where is the STM32G473CEU6 datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the STM32G473CEU6?

JLCPCB lists it as part C1342773, with 457 in stock; the sellers' links on this page open their listings.

What can replace the STM32G473CEU6?

Parts like it in the library: the STM32G431CBU6 by STMicroelectronics, the STM32H523CEU6 by STMicroelectronics, the STM32G474CEU6 by STMicroelectronics and the STM32G473CBU6 by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the STM32G473CEU6?

5 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8