6 layers56 × 56 mm
Overview
The STM32G474CEU6 is a microcontroller made by STMicroelectronics in a UFQFPN-48(7x7) package with 49 pins. -40℃~+85℃ 1.71V~3.6V 128KB 12bit 12bit 170MHz 32 Bit 38 512KB ARM Cortex-M4F Built-in FLASH UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its KiCad symbol (MCU_ST_STM32G4:STM32G474CEUx, from KiCad's library) and its footprint (Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm, from KiCad's library), ready for a KiCad board. 70 are in stock at JLCPCB (part C1235412). 15 open-source boards in 10 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
18- Supply, least
- 1.71 V · VDD, recommended operating min · p. 84
- Supply, most
- 3.6 V · VDD, recommended operating max · p. 84
- Supply, least
- 1.55 V · VBAT, recommended operating min · p. 84
- Supply, least
- 1.62 V · VDDA, ADC used, recommended operating min · p. 84
- Supply, least
- 1.8 V · VDDA, COMP used, recommended operating min · p. 84
- Supply, least
- 2.4 V · VDDA, VREFBUF used, recommended operating min · p. 84
- Supply, absolute maximum
- 4 V · VDD, VDDA, VBAT and VREF+, absolute max · p. 82
- Works from
- -40 °C · Ambient, suffix 6, maximum power dissipation min · p. 84
- Works up to
- 85 °C · Ambient, suffix 6, maximum power dissipation max · p. 84
- Works up to
- 105 °C · Ambient, suffix 6, low-power dissipation max; junction must remain within limit · p. 84
- Junction, hottest
- 150 °C · Junction, absolute max · p. 83
- Junction, hottest
- 105 °C · Junction, suffix 6 operating max · p. 84
- Takes working
- 29.5 mA · Total MCU supply, Run at 170 MHz, Flash single bank, peripherals disabled, 25°C typical · p. 90
- Takes at most
- 48 mA · Total MCU supply, Run at 170 MHz, Flash single bank, peripherals disabled, 105°C max · p. 90
- Takes asleep
- 130 nA · Standby, RTC disabled, no independent watchdog, 3 V, 25°C typical · p. 104
- Takes asleep
- 43 nA · Shutdown, RTC disabled, 3 V, 25°C typical · p. 106
- A pin gives at most
- 20 mA · Any I/O or control pin, sourced current absolute max · p. 83
- Junction to air (UFQFPN48)
- 26.8 K/W · Junction to ambient, stated value · p. 229
What it is and has
23- Core
- Arm 32-bit Cortex-M4 CPU with FPU · p. 1
- Maximum clock
- 170 MHz · p. 1
- CPU performance
- 213 DMIPS; MPU; DSP instructions · p. 1
- Flash memory
- 512 Kbytes with ECC · p. 1
- SRAM
- 96 Kbytes, with hardware parity · p. 1
- CCM SRAM
- 32 Kbytes · p. 1
- DMA
- 16 channels · p. 1
- ADC
- 5 × 12-bit, 0.25 µs; family maximum 42 channels · p. 1
- DAC
- 7 × 12-bit channels · p. 1
- Comparators
- 7 ultra-fast rail-to-rail · p. 1
- Operational amplifiers
- 6 · p. 1
- Timers
- 17 · p. 1
- Mathematical accelerator
- CORDIC for trigonometric functions · p. 1
- Mathematical accelerator
- FMAC filter mathematical accelerator · p. 1
- Low-power modes
- Sleep, stop, standby and shutdown · p. 25
- Quad-SPI
- Memory interface · p. 1
- Core
- Arm® 32-bit Cortex®-M4 CPU with FPU · p. 1
- Maximum clock frequency
- 170 MHz · p. 1
- CPU capabilities
- 213 DMIPS, MPU, DSP instructions · p. 1
- SRAM
- 128 KB · p. 1
- High-resolution timer
- 184 ps, 12 channels · p. 1
- Mathematical hardware accelerator
- CORDIC for trigonometric functions acceleration · p. 1
- USB certification
- USB-IF certified for Full-speed device operation · p. 180
Specifications
439| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| External main supply voltage (including VDD, VDDA, VBAT and VREF+) VDD - VSS | min -0.3 · max 4 V | 82 | |
| Input voltage on FT_c pins VIN | Minimum: VSS-0.3 | max 5.5 V | 82 |
| Input voltage on TT_xx pins VIN | Minimum: VSS-0.3 | max 4 V | 82 |
| Input voltage on any other pins VIN | Minimum: VSS-0.3 | max 4 V | 82 |
| Variations between different VDDX power pins of the same domain |∆VDDx| | max 50 mV | 82 | |
| Variations between all the different ground pins |VSSx-VSS| | Include VREF- pin | max 50 mV | 82 |
| Allowed voltage difference for VREF+ > VDDA VREF+-VDDA | max 0.4 V | 82 | |
| Total current into sum of all VDD power lines (source) ∑IVDD | max 150 mA | 83 | |
| Total current out of sum of all VSS ground lines (sink) ∑IVSS | max 150 mA | 83 | |
| Maximum current into each VDD power pin (source) IVDD(PIN) | max 100 mA | 83 | |
| Maximum current out of each VSS ground pin (sink) IVSS(PIN) | max 100 mA | 83 | |
| Output current sunk by any I/O and control pin except FT_f IIO(PIN) | max 20 mA | 83 | |
| Output current sunk by any FT_f pin IIO(PIN) | max 20 mA | 83 | |
| Output current sourced by any I/O and control pin IIO(PIN) | max 20 mA | 83 | |
| Total output current sunk by sum of all I/Os and control pins ∑IIO(PIN) | max 100 mA | 83 | |
| Total output current sourced by sum of all I/Os and control pins ∑IIO(PIN) | max 100 mA | 83 | |
| Total injected current (sum of all I/Os and control pins) ∑|IINJ(PIN)| | Printed limit: ±25 mA; absolute sum of negative injected currents | max 25 mA | 83 |
| Storage temperature range TSTG | min -65 · max 150 °C | 83 | |
| Maximum junction temperature TJ | max 150 °C | 83 | |
| Internal AHB clock frequency fHCLK | min 0 · max 170 MHz | 84 | |
| Internal APB1 clock frequency fPCLK1 | min 0 · max 170 MHz | 84 | |
| Internal APB2 clock frequency fPCLK2 | min 0 · max 170 MHz | 84 | |
| Standard operating voltage VDD | min 1.71 · max 3.6 V | 84 | |
| Analog supply voltage VDDA | ADC; maximum 3.6 V shared across table rows | min 1.62 V | 84 |
| Analog supply voltage VDDA | DAC 1 MSPS or DAC 15 MSPS or OPAMP; minimum 1.8 V on following line | max 3.6 V | 84 |
| Analog supply voltage VDDA | DAC 1 MSPS or DAC 15 MSPS or OPAMP; maximum 3.6 V on preceding line | min 1.8 V | 84 |
| Analog supply voltage VDDA | COMP used | min 1.8 · max 3.6 V | 84 |
| Analog supply voltage VDDA | VREFBUF used; maximum 3.6 V shared across table rows | min 2.4 V | 84 |
| Backup operating voltage VBAT | min 1.55 · max 3.6 V | 84 | |
| I/O input voltage VIN | TT_xx; maximum VDD+0.3 | min -0.3 V | 84 |
| I/O input voltage VIN | FT_c | min -0.3 · max 5 V | 84 |
| I/O input voltage VIN | All I/O except TT_xx and FT_c; maximum MIN(MIN(VDD, VDDA)+3.6 V, 5.5 V) | min -0.3 V | 84 |
| Ambient temperature for the suffix 6 version TA | Maximum power dissipation | min -40 · max 85 °C | 84 |
| Ambient temperature for the suffix 6 version TA | Low-power dissipation; TJ must not exceed TJmax | min -40 · max 105 °C | 84 |
| Junction temperature range TJ | Suffix 6 version | min -40 · max 105 °C | 84 |
| Supply current in Run mode IDD (Run) | Range 2, 26 MHz, 25°C; HSE bypass, all peripherals disabled | typ 3.65 · max 4.4 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 2, 26 MHz, 55°C; HSE bypass, all peripherals disabled | typ 3.85 · max 6.6 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 2, 26 MHz, 85°C; HSE bypass, all peripherals disabled | typ 4.45 · max 11 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 2, 26 MHz, 105°C; HSE bypass, all peripherals disabled | typ 5.1 · max 16 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 2, 16 MHz, 25°C; HSE bypass, all peripherals disabled | typ 2.3 · max 3 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 2, 16 MHz, 55°C; HSE bypass, all peripherals disabled | typ 2.55 · max 5 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 2, 16 MHz, 85°C; HSE bypass, all peripherals disabled | typ 3.1 · max 9 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 2, 16 MHz, 105°C; HSE bypass, all peripherals disabled | typ 3.8 · max 14.9 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 2, 8 MHz, 25°C; HSE bypass, all peripherals disabled | typ 1.25 · max 2 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 2, 8 MHz, 55°C; HSE bypass, all peripherals disabled | typ 1.5 · max 3.6 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 2, 8 MHz, 85°C; HSE bypass, all peripherals disabled | typ 2.05 · max 7.7 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 2, 8 MHz, 105°C; HSE bypass, all peripherals disabled | typ 2.8 · max 13 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 2, 4 MHz, 25°C; HSE bypass, all peripherals disabled | typ 0.75 · max 1.4 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 2, 4 MHz, 55°C; HSE bypass, all peripherals disabled | typ 0.955 · max 3 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 2, 4 MHz, 85°C; HSE bypass, all peripherals disabled | typ 1.5 · max 7 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 2, 4 MHz, 105°C; HSE bypass, all peripherals disabled | typ 2.3 · max 12 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 2, 2 MHz, 25°C; HSE bypass, all peripherals disabled | typ 0.47 · max 0.99 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 2, 2 MHz, 55°C; HSE bypass, all peripherals disabled | typ 0.69 · max 2.6 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 2, 2 MHz, 85°C; HSE bypass, all peripherals disabled | typ 1.25 · max 6.7 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 2, 2 MHz, 105°C; HSE bypass, all peripherals disabled | typ 2 · max 12 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 2, 1 MHz, 25°C; HSE bypass, all peripherals disabled | typ 0.34 · max 0.83 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 2, 1 MHz, 55°C; HSE bypass, all peripherals disabled | typ 0.55 · max 2.5 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 2, 1 MHz, 85°C; HSE bypass, all peripherals disabled | typ 1.1 · max 6.5 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 2, 1 MHz, 105°C; HSE bypass, all peripherals disabled | typ 1.9 · max 12 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 2, 100 KHz, 25°C; HSE bypass, all peripherals disabled | typ 0.22 · max 0.69 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 2, 100 KHz, 55°C; HSE bypass, all peripherals disabled | typ 0.43 · max 2.3 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 2, 100 KHz, 85°C; HSE bypass, all peripherals disabled | typ 0.98 · max 6.3 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 2, 100 KHz, 105°C; HSE bypass, all peripherals disabled | typ 1.75 · max 11 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1 Boost mode, 170 MHz, 25°C; PLL ON, all peripherals disabled | typ 29.5 · max 31 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1 Boost mode, 170 MHz, 55°C; PLL ON, all peripherals disabled | typ 29.5 · max 35 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1 Boost mode, 170 MHz, 85°C; PLL ON, all peripherals disabled | typ 31 · max 42 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1 Boost mode, 170 MHz, 105°C; PLL ON, all peripherals disabled | typ 32 · max 48 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 150 MHz, 25°C; PLL ON, all peripherals disabled | typ 24.5 · max 26 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 150 MHz, 55°C; PLL ON, all peripherals disabled | typ 26 · max 28 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 150 MHz, 85°C; PLL ON, all peripherals disabled | typ 27 · max 34 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 150 MHz, 105°C; PLL ON, all peripherals disabled | typ 28 · max 44 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 120 MHz, 25°C; PLL ON, all peripherals disabled | typ 19.5 · max 21 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 120 MHz, 55°C; PLL ON, all peripherals disabled | typ 20 · max 23 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 120 MHz, 85°C; PLL ON, all peripherals disabled | typ 20.5 · max 32 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 120 MHz, 105°C; PLL ON, all peripherals disabled | typ 21.5 · max 38 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 80 MHz, 25°C; PLL ON, all peripherals disabled | typ 13 · max 15 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 80 MHz, 55°C; PLL ON, all peripherals disabled | typ 13.5 · max 17 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 80 MHz, 85°C; PLL ON, all peripherals disabled | typ 14 · max 25 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 80 MHz, 105°C; PLL ON, all peripherals disabled | typ 15.5 · max 30 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 72 MHz, 25°C; PLL ON, all peripherals disabled | typ 12 · max 13 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 72 MHz, 55°C; PLL ON, all peripherals disabled | typ 12 · max 16 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 72 MHz, 85°C; PLL ON, all peripherals disabled | typ 13 · max 23 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 72 MHz, 105°C; PLL ON, all peripherals disabled | typ 14 · max 29 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 64 MHz, 25°C; PLL ON, all peripherals disabled | typ 10.5 · max 12 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 64 MHz, 55°C; PLL ON, all peripherals disabled | typ 11 · max 14 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 64 MHz, 85°C; PLL ON, all peripherals disabled | typ 11.5 · max 21 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 64 MHz, 105°C; PLL ON, all peripherals disabled | typ 12.5 · max 27 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 48 MHz, 25°C; HSE bypass, all peripherals disabled | typ 7.9 · max 9.1 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 48 MHz, 55°C; HSE bypass, all peripherals disabled | typ 8.2 · max 13 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 48 MHz, 85°C; HSE bypass, all peripherals disabled | typ 9 · max 19 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 48 MHz, 105°C; HSE bypass, all peripherals disabled | typ 9.7 · max 25 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 32 MHz, 25°C; HSE bypass, all peripherals disabled | typ 5.4 · max 6.5 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 32 MHz, 55°C; HSE bypass, all peripherals disabled | typ 5.65 · max 9.6 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 32 MHz, 85°C; HSE bypass, all peripherals disabled | typ 6.4 · max 15 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 32 MHz, 105°C; HSE bypass, all peripherals disabled | typ 7.2 · max 21 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 24 MHz, 25°C; HSE bypass, all peripherals disabled | typ 4.1 · max 5.2 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 24 MHz, 55°C; HSE bypass, all peripherals disabled | typ 4.35 · max 8 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 24 MHz, 85°C; HSE bypass, all peripherals disabled | typ 5.1 · max 14 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 24 MHz, 105°C; HSE bypass, all peripherals disabled | typ 5.95 · max 20 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 16 MHz, 25°C; HSE bypass, all peripherals disabled | typ 2.8 · max 4.3 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 16 MHz, 55°C; HSE bypass, all peripherals disabled | typ 3.1 · max 6.4 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 16 MHz, 85°C; HSE bypass, all peripherals disabled | typ 3.8 · max 12 mA | 90 |
| Supply current in Run mode IDD (Run) | Range 1, 16 MHz, 105°C; HSE bypass, all peripherals disabled | typ 4.7 · max 18 mA | 90 |
| Supply current in Low-power run mode IDD (LPRun) | HSE bypass, peripherals disabled, 2 MHz, 25°C | typ 455 · max 1200 uA | 91 |
| Supply current in Low-power run mode IDD (LPRun) | HSE bypass, peripherals disabled, 2 MHz, 55°C | typ 725 · max 3200 uA | 91 |
| Supply current in Low-power run mode IDD (LPRun) | HSE bypass, peripherals disabled, 2 MHz, 85°C | typ 1350 · max 8100 uA | 91 |
| Supply current in Low-power run mode IDD (LPRun) | HSE bypass, peripherals disabled, 2 MHz, 105°C | typ 2250 · max 14000 uA | 91 |
| Supply current in Low-power run mode IDD (LPRun) | HSE bypass, peripherals disabled, 1 MHz, 25°C | typ 280 · max 1100 uA | 91 |
| Supply current in Low-power run mode IDD (LPRun) | HSE bypass, peripherals disabled, 1 MHz, 55°C | typ 545 · max 3000 uA | 91 |
| Supply current in Low-power run mode IDD (LPRun) | HSE bypass, peripherals disabled, 1 MHz, 85°C | typ 1200 · max 7900 uA | 91 |
| Supply current in Low-power run mode IDD (LPRun) | HSE bypass, peripherals disabled, 1 MHz, 105°C | typ 2100 · max 14000 uA | 91 |
| Supply current in Low-power run mode IDD (LPRun) | HSE bypass, peripherals disabled, 250 KHz, 25°C | typ 160 · max 840 uA | 91 |
| Supply current in Low-power run mode IDD (LPRun) | HSE bypass, peripherals disabled, 250 KHz, 55°C | typ 435 · max 2800 uA | 91 |
| Supply current in Low-power run mode IDD (LPRun) | HSE bypass, peripherals disabled, 250 KHz, 85°C | typ 1100 · max 7700 uA | 91 |
| Supply current in Low-power run mode IDD (LPRun) | HSE bypass, peripherals disabled, 250 KHz, 105°C | typ 2000 · max 14000 uA | 91 |
| Supply current in Low-power run mode IDD (LPRun) | HSE bypass, peripherals disabled, 62.5 KHz, 25°C | typ 130 · max 810 uA | 91 |
| Supply current in Low-power run mode IDD (LPRun) | HSE bypass, peripherals disabled, 62.5 KHz, 55°C | typ 405 · max 2700 uA | 91 |
| Supply current in Low-power run mode IDD (LPRun) | HSE bypass, peripherals disabled, 62.5 KHz, 85°C | typ 1050 · max 7600 uA | 91 |
| Supply current in Low-power run mode IDD (LPRun) | HSE bypass, peripherals disabled, 62.5 KHz, 105°C | typ 1950 · max 14000 uA | 91 |
| Supply current in Low-power run mode IDD (LPRun) | HSI16, peripherals disabled, 2 MHz, 25°C | typ 920 · max 1900 uA | 91 |
| Supply current in Low-power run mode IDD (LPRun) | HSI16, peripherals disabled, 2 MHz, 55°C | typ 1200 · max 3800 uA | 91 |
| Supply current in Low-power run mode IDD (LPRun) | HSI16, peripherals disabled, 2 MHz, 85°C | typ 1850 · max 8700 uA | 91 |
| Supply current in Low-power run mode IDD (LPRun) | HSI16, peripherals disabled, 2 MHz, 105°C | typ 2750 · max 15000 uA | 91 |
| Supply current in Low-power run mode IDD (LPRun) | HSI16, peripherals disabled, 1 MHz, 25°C | typ 780 · max 1700 uA | 91 |
| Supply current in Low-power run mode IDD (LPRun) | HSI16, peripherals disabled, 1 MHz, 55°C | typ 1100 · max 3700 uA | 91 |
| Supply current in Low-power run mode IDD (LPRun) | HSI16, peripherals disabled, 1 MHz, 85°C | typ 1700 · max 8600 uA | 91 |
| Supply current in Low-power run mode IDD (LPRun) | HSI16, peripherals disabled, 1 MHz, 105°C | typ 2650 · max 14000 uA | 91 |
| Supply current in Low-power run mode IDD (LPRun) | HSI16, peripherals disabled, 250 KHz, 25°C | typ 725 · max 1600 uA | 91 |
| Supply current in Low-power run mode IDD (LPRun) | HSI16, peripherals disabled, 250 KHz, 55°C | typ 980 · max 3600 uA | 91 |
| Supply current in Low-power run mode IDD (LPRun) | HSI16, peripherals disabled, 250 KHz, 85°C | typ 1600 · max 8400 uA | 91 |
| Supply current in Low-power run mode IDD (LPRun) | HSI16, peripherals disabled, 250 KHz, 105°C | typ 2500 · max 14000 uA | 91 |
| Supply current in Low-power run mode IDD (LPRun) | HSI16, peripherals disabled, 62.5 KHz, 25°C | typ 720 · max 1500 uA | 91 |
| Supply current in Low-power run mode IDD (LPRun) | HSI16, peripherals disabled, 62.5 KHz, 55°C | typ 955 · max 3500 uA | 91 |
| Supply current in Low-power run mode IDD (LPRun) | HSI16, peripherals disabled, 62.5 KHz, 85°C | typ 1600 · max 8400 uA | 91 |
| Supply current in Low-power run mode IDD (LPRun) | HSI16, peripherals disabled, 62.5 KHz, 105°C | typ 2500 · max 14000 uA | 91 |
| Supply current in Stop 0 mode, RTC disabled IDD(Stop 0) | VDD = 1.8 V, 25°C | typ 190 · max 790 uA | 104 |
| Supply current in Stop 0 mode, RTC disabled IDD(Stop 0) | VDD = 1.8 V, 55°C | typ 380 · max 2400 uA | 104 |
| Supply current in Stop 0 mode, RTC disabled IDD(Stop 0) | VDD = 1.8 V, 85°C | typ 980 · max 6500 uA | 104 |
| Supply current in Stop 0 mode, RTC disabled IDD(Stop 0) | VDD = 1.8 V, 105°C | typ 1750 · max 11000 uA | 104 |
| Supply current in Stop 0 mode, RTC disabled IDD(Stop 0) | VDD = 2.4 V, 25°C | typ 190 · max 790 uA | 104 |
| Supply current in Stop 0 mode, RTC disabled IDD(Stop 0) | VDD = 2.4 V, 55°C | typ 380 · max 2400 uA | 104 |
| Supply current in Stop 0 mode, RTC disabled IDD(Stop 0) | VDD = 2.4 V, 85°C | typ 985 · max 6400 uA | 104 |
| Supply current in Stop 0 mode, RTC disabled IDD(Stop 0) | VDD = 2.4 V, 105°C | typ 1750 · max 11000 uA | 104 |
| Supply current in Stop 0 mode, RTC disabled IDD(Stop 0) | VDD = 3 V, 25°C | typ 190 · max 800 uA | 104 |
| Supply current in Stop 0 mode, RTC disabled IDD(Stop 0) | VDD = 3 V, 55°C | typ 380 · max 2400 uA | 104 |
| Supply current in Stop 0 mode, RTC disabled IDD(Stop 0) | VDD = 3 V, 85°C | typ 985 · max 6500 uA | 104 |
| Supply current in Stop 0 mode, RTC disabled IDD(Stop 0) | VDD = 3 V, 105°C | typ 1750 · max 12000 uA | 104 |
| Supply current in Stop 0 mode, RTC disabled IDD(Stop 0) | VDD = 3.6 V, 25°C | typ 190 · max 800 uA | 104 |
| Supply current in Stop 0 mode, RTC disabled IDD(Stop 0) | VDD = 3.6 V, 55°C | typ 380 · max 2500 uA | 104 |
| Supply current in Stop 0 mode, RTC disabled IDD(Stop 0) | VDD = 3.6 V, 85°C | typ 985 · max 6500 uA | 104 |
| Supply current in Stop 0 mode, RTC disabled IDD(Stop 0) | VDD = 3.6 V, 105°C | typ 1750 · max 12000 uA | 104 |
| Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby) | No independent watchdog, VDD = 1.8 V, 25°C | typ 100 · max 200 nA | 104 |
| Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby) | No independent watchdog, VDD = 1.8 V, 55°C | typ 275 · max 1100 nA | 104 |
| Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby) | No independent watchdog, VDD = 1.8 V, 85°C | typ 1350 · max 4100 nA | 104 |
| Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby) | No independent watchdog, VDD = 1.8 V, 105°C | typ 3450 · max 9700 nA | 104 |
| Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby) | No independent watchdog, VDD = 2.4 V, 25°C | typ 110 · max 220 nA | 104 |
| Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby) | No independent watchdog, VDD = 2.4 V, 55°C | typ 325 · max 1200 nA | 104 |
| Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby) | No independent watchdog, VDD = 2.4 V, 85°C | typ 1600 · max 4800 nA | 104 |
| Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby) | No independent watchdog, VDD = 2.4 V, 105°C | typ 4100 · max 12000 nA | 104 |
| Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby) | No independent watchdog, VDD = 3 V, 25°C | typ 130 · max 240 nA | 104 |
| Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby) | No independent watchdog, VDD = 3 V, 55°C | typ 385 · max 1400 nA | 104 |
| Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby) | No independent watchdog, VDD = 3 V, 85°C | typ 1900 · max 5500 nA | 104 |
| Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby) | No independent watchdog, VDD = 3 V, 105°C | typ 4850 · max 13000 nA | 104 |
| Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby) | No independent watchdog, VDD = 3.6 V, 25°C | typ 180 · max 360 nA | 104 |
| Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby) | No independent watchdog, VDD = 3.6 V, 55°C | typ 530 · max 1700 nA | 104 |
| Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby) | No independent watchdog, VDD = 3.6 V, 85°C | typ 2400 · max 6300 nA | 104 |
| Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby) | No independent watchdog, VDD = 3.6 V, 105°C | typ 6050 · max 15000 nA | 104 |
| Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby) | With independent watchdog, VDD = 1.8 V, 25°C | typ 300 nA | 104 |
| Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby) | With independent watchdog, VDD = 2.4 V, 25°C | typ 365 nA | 104 |
| Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby) | With independent watchdog, VDD = 3 V, 25°C | typ 435 nA | 104 |
| Supply current in Standby mode (backup registers retained), RTC disabled IDD (Standby) | With independent watchdog, VDD = 3.6 V, 25°C | typ 545 nA | 104 |
| Supply current during wakeup from Standby mode IDD (wakeup from Standby) | VDD = 3 V, 25°C, wakeup clock HSI16 = 16 MHz; code execution from Flash; average over typical wakeup time | typ 2.46 mA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 1.8 V, 25°C | typ 19 · max 78 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 1.8 V, 55°C | typ 140 · max 490 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 1.8 V, 85°C | typ 885 · max 3100 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 1.8 V, 105°C | typ 2500 · max 8100 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 2.4 V, 25°C | typ 28 · max 94 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 2.4 V, 55°C | typ 180 · max 570 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 2.4 V, 85°C | typ 1050 · max 3600 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 2.4 V, 105°C | typ 2950 · max 9300 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 3 V, 25°C | typ 43 · max 130 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 3 V, 55°C | typ 230 · max 680 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 3 V, 85°C | typ 1300 · max 4100 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 3 V, 105°C | typ 3600 · max 11000 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 3.6 V, 25°C | typ 87 · max 190 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 3.6 V, 55°C | typ 360 · max 870 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 3.6 V, 85°C | typ 1750 · max 4900 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 3.6 V, 105°C | typ 4700 · max 13000 nA | 106 |
| Thermal resistance junction-ambient ΘJA | UFQFPN48 - 7 × 7 mm; table gives Value without min/typ/max classification | typ 26.8 °C/W | 229 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSI, no independent watchdog; VDD = 1.8 V; 25°C | typ 540 · max 660 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSI, no independent watchdog; VDD = 1.8 V; 55°C | typ 725 · max 1500 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSI, no independent watchdog; VDD = 1.8 V; 85°C | typ 1800 · max 4600 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSI, no independent watchdog; VDD = 1.8 V; 105°C | typ 3850 · max 11000 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSI, no independent watchdog; VDD = 1.8 V; 125°C | typ 8850 · max 27000 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSI, no independent watchdog; VDD = 2.4 V; 25°C | typ 700 · max 860 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSI, no independent watchdog; VDD = 2.4 V; 55°C | typ 920 · max 1900 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSI, no independent watchdog; VDD = 2.4 V; 85°C | typ 2150 · max 5300 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSI, no independent watchdog; VDD = 2.4 V; 105°C | typ 4650 · max 12000 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSI, no independent watchdog; VDD = 2.4 V; 125°C | typ 10500 · max 31000 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSI, no independent watchdog; VDD = 3 V; 25°C | typ 885 · max 1100 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSI, no independent watchdog; VDD = 3 V; 55°C | typ 1150 · max 2200 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSI, no independent watchdog; VDD = 3 V; 85°C | typ 2650 · max 6300 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSI, no independent watchdog; VDD = 3 V; 105°C | typ 5550 · max 14000 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSI, no independent watchdog; VDD = 3 V; 125°C | typ 12500 · max 36000 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSI, no independent watchdog; VDD = 3.6 V; 25°C | typ 1100 · max 1400 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSI, no independent watchdog; VDD = 3.6 V; 55°C | typ 1450 · max 2700 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSI, no independent watchdog; VDD = 3.6 V; 85°C | typ 3350 · max 7400 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSI, no independent watchdog; VDD = 3.6 V; 105°C | typ 7000 · max 16000 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSI, no independent watchdog; VDD = 3.6 V; 125°C | typ 15500 · max 41000 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSI, with independent watchdog; VDD = 1.8 V; 25°C | typ 580 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSI, with independent watchdog; VDD = 2.4 V; 25°C | typ 760 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSI, with independent watchdog; VDD = 3 V; 25°C | typ 960 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSI, with independent watchdog; VDD = 3.6 V; 25°C | typ 1200 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 1.8 V; 25°C | typ 410 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 1.8 V; 55°C | typ 580 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 1.8 V; 85°C | typ 1600 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 1.8 V; 105°C | typ 3650 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 1.8 V; 125°C | typ 8600 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 2.4 V; 25°C | typ 545 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 2.4 V; 55°C | typ 750 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 2.4 V; 85°C | typ 1950 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 2.4 V; 105°C | typ 4450 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 2.4 V; 125°C | typ 10500 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 3 V; 25°C | typ 830 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 3 V; 55°C | typ 1150 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 3 V; 85°C | typ 2750 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 3 V; 105°C | typ 5800 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 3 V; 125°C | typ 13000 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 3.6 V; 25°C | typ 2200 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 3.6 V; 55°C | typ 3050 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 3.6 V; 85°C | typ 5550 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 3.6 V; 105°C | typ 9550 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 3.6 V; 125°C | typ 18000 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 25°C | typ 370 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 55°C | typ 570 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 85°C | typ 1350 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 105°C | typ 3150 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 125°C | typ 7100 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 25°C | typ 495 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 55°C | typ 715 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 85°C | typ 1650 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 105°C | typ 3800 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 125°C | typ 8350 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3 V; 25°C | typ 655 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3 V; 55°C | typ 915 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3 V; 85°C | typ 2100 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3 V; 105°C | typ 4550 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3 V; 125°C | typ 9850 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 25°C | typ 875 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 55°C | typ 1350 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 85°C | typ 2800 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 105°C | typ 5750 nA | 105 |
| Supply current in Standby mode (backup registers retained), RTC enabled IDD (Standby with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 125°C | typ 12000 nA | 105 |
| Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2) | VDD = 1.8 V; 25°C | typ 300 nA | 105 |
| Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2) | VDD = 1.8 V; 55°C | typ 825 nA | 105 |
| Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2) | VDD = 1.8 V; 85°C | typ 2950 nA | 105 |
| Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2) | VDD = 1.8 V; 105°C | typ 6300 nA | 105 |
| Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2) | VDD = 1.8 V; 125°C | typ 12550 nA | 105 |
| Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2) | VDD = 2.4 V; 25°C | typ 305 nA | 105 |
| Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2) | VDD = 2.4 V; 55°C | typ 875 nA | 105 |
| Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2) | VDD = 2.4 V; 85°C | typ 2900 nA | 105 |
| Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2) | VDD = 2.4 V; 105°C | typ 6400 nA | 105 |
| Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2) | VDD = 2.4 V; 125°C | typ 12500 nA | 105 |
| Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2) | VDD = 3 V; 25°C | typ 305 nA | 105 |
| Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2) | VDD = 3 V; 55°C | typ 865 nA | 105 |
| Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2) | VDD = 3 V; 85°C | typ 2950 nA | 105 |
| Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2) | VDD = 3 V; 105°C | typ 6150 nA | 105 |
| Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2) | VDD = 3 V; 125°C | typ 12500 nA | 105 |
| Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2) | VDD = 3.6 V; 25°C | typ 310 nA | 105 |
| Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2) | VDD = 3.6 V; 55°C | typ 870 nA | 105 |
| Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2) | VDD = 3.6 V; 85°C | typ 3000 nA | 105 |
| Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2) | VDD = 3.6 V; 105°C | typ 6450 nA | 105 |
| Supply current to be added in Standby mode when SRAM2 is retained IDD (SRAM2) | VDD = 3.6 V; 125°C | typ 13000 nA | 105 |
| Supply current during wakeup from Standby mode IDD (wakeup from Standby) | VDD = 3 V; 25°C; wakeup clock HSI16 = 16 MHz; code execution from Flash | typ 2.46 mA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 1.8 V; 25°C | typ 19 · max 78 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 1.8 V; 55°C | typ 140 · max 490 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 1.8 V; 85°C | typ 885 · max 3100 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 1.8 V; 105°C | typ 2500 · max 8100 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 1.8 V; 125°C | typ 6600 · max 24000 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 2.4 V; 25°C | typ 28 · max 94 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 2.4 V; 55°C | typ 180 · max 570 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 2.4 V; 85°C | typ 1050 · max 3600 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 2.4 V; 105°C | typ 2950 · max 9300 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 2.4 V; 125°C | typ 7800 · max 27000 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 3 V; 25°C | typ 43 · max 130 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 3 V; 55°C | typ 230 · max 680 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 3 V; 85°C | typ 1300 · max 4100 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 3 V; 105°C | typ 3600 · max 11000 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 3 V; 125°C | typ 9300 · max 31000 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 3.6 V; 25°C | typ 87 · max 190 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 3.6 V; 55°C | typ 360 · max 870 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 3.6 V; 85°C | typ 1750 · max 4900 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 3.6 V; 105°C | typ 4700 · max 13000 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC disabled IDD (Shutdown) | VDD = 3.6 V; 125°C | typ 12000 · max 35000 nA | 106 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 1.8 V; 25°C | typ 330 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 1.8 V; 55°C | typ 445 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 1.8 V; 85°C | typ 1150 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 1.8 V; 105°C | typ 2700 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 1.8 V; 125°C | typ 6800 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 2.4 V; 25°C | typ 460 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 2.4 V; 55°C | typ 605 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 2.4 V; 85°C | typ 1450 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 2.4 V; 105°C | typ 3350 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 2.4 V; 125°C | typ 8150 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 3 V; 25°C | typ 745 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 3 V; 55°C | typ 1000 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 3 V; 85°C | typ 2200 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 3 V; 105°C | typ 4550 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 3 V; 125°C | typ 10500 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 3.6 V; 25°C | typ 2100 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 3.6 V; 55°C | typ 2850 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 3.6 V; 85°C | typ 4900 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 3.6 V; 105°C | typ 8150 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE bypassed at 32768 Hz; VDD = 3.6 V; 125°C | typ 15500 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 25°C | typ 285 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 55°C | typ 450 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 85°C | typ 1050 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 105°C | typ 2500 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 25°C | typ 410 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 55°C | typ 585 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 85°C | typ 1300 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 105°C | typ 3050 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3 V; 25°C | typ 565 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3 V; 55°C | typ 770 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3 V; 85°C | typ 1750 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3 V; 105°C | typ 3750 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 25°C | typ 780 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 55°C | typ 1200 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 85°C | typ 2400 nA | 107 |
| Supply current in Shutdown mode (backup registers retained) RTC enabled IDD (Shutdown with RTC) | RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 105°C | typ 4850 nA | 107 |
| Supply current during wakeup from Shutdown mode IDD(wakeup from Shutdown) | VDD = 3 V; 25°C; wakeup clock HSI16 = 16 MHz; code execution from Flash | typ 1.6 mA | 107 |
| Bus Matrix | Range 1 Boost mode | typ 6.12 uA/MHz | 110 |
| Bus Matrix | Range 1 Normal mode | typ 5.69 uA/MHz | 110 |
| Bus Matrix | Range 2 | typ 4.7 uA/MHz | 110 |
| Bus Matrix | Low-power run and sleep | typ 6.11 uA/MHz | 110 |
| AHB1 to APB1 bridge | Range 1 Boost mode | typ 0.26 uA/MHz | 110 |
| AHB1 to APB1 bridge | Range 1 Normal mode | typ 0.25 uA/MHz | 110 |
| AHB1 to APB1 bridge | Range 2 | typ 0.22 uA/MHz | 110 |
| AHB1 to APB1 bridge | Low-power run and sleep | typ 0.03 uA/MHz | 110 |
| AHB1 to APB2 bridge | Range 1 Boost mode | typ 0.39 uA/MHz | 110 |
| AHB1 to APB2 bridge | Range 1 Normal mode | typ 0.37 uA/MHz | 110 |
| AHB1 to APB2 bridge | Range 2 | typ 0.32 uA/MHz | 110 |
| AHB1 to APB2 bridge | Low-power run and sleep | typ 0.03 uA/MHz | 110 |
| FSMC | Range 1 Boost mode | typ 10.21 uA/MHz | 110 |
| FSMC | Range 1 Normal mode | typ 9.52 uA/MHz | 110 |
| FSMC | Range 2 | typ 7.87 uA/MHz | 110 |
| FSMC | Low-power run and sleep | typ 10.28 uA/MHz | 110 |
| QUADSPI | Range 1 Boost mode | typ 3.51 uA/MHz | 110 |
| QUADSPI | Range 1 Normal mode | typ 3.27 uA/MHz | 110 |
| QUADSPI | Range 2 | typ 2.69 uA/MHz | 110 |
| QUADSPI | Low-power run and sleep | typ 3.51 uA/MHz | 110 |
| CORDIC | Range 1 Boost mode | typ 1.28 uA/MHz | 110 |
| CORDIC | Range 1 Normal mode | typ 1.19 uA/MHz | 110 |
| CORDIC | Range 2 | typ 0.98 uA/MHz | 110 |
| CORDIC | Low-power run and sleep | typ 0.78 uA/MHz | 110 |
| CRC | Range 1 Boost mode | typ 0.74 uA/MHz | 110 |
| CRC | Range 1 Normal mode | typ 0.68 uA/MHz | 110 |
| CRC | Range 2 | typ 0.57 uA/MHz | 110 |
| CRC | Low-power run and sleep | typ 0.63 uA/MHz | 110 |
| DMA 1 | Range 1 Boost mode | typ 2.83 uA/MHz | 110 |
| DMA 1 | Range 1 Normal mode | typ 2.64 uA/MHz | 110 |
| DMA 1 | Range 2 | typ 2.17 uA/MHz | 110 |
| DMA 1 | Low-power run and sleep | typ 2.75 uA/MHz | 110 |
| DMA 2 | Range 1 Boost mode | typ 3.11 uA/MHz | 110 |
| DMA 2 | Range 1 Normal mode | typ 2.9 uA/MHz | 110 |
| DMA 2 | Range 2 | typ 2.39 uA/MHz | 110 |
| DMA 2 | Low-power run and sleep | typ 2.43 uA/MHz | 110 |
| DMAMUX | Range 1 Boost mode | typ 6.71 uA/MHz | 110 |
| DMAMUX | Range 1 Normal mode | typ 6.26 uA/MHz | 110 |
| DMAMUX | Range 2 | typ 5.17 uA/MHz | 110 |
| DMAMUX | Low-power run and sleep | typ 6.68 uA/MHz | 110 |
| SRAM1 | Range 1 Boost mode | typ 0.58 uA/MHz | 110 |
| SRAM1 | Range 1 Normal mode | typ 0.54 uA/MHz | 110 |
| SRAM1 | Range 2 | typ 0.44 uA/MHz | 110 |
| SRAM1 | Low-power run and sleep | typ 0.54 uA/MHz | 110 |
| FLASH | Range 1 Boost mode | typ 6.46 uA/MHz | 110 |
| FLASH | Range 1 Normal mode | typ 6.01 uA/MHz | 110 |
| FLASH | Range 2 | typ 4.95 uA/MHz | 110 |
| FLASH | Low-power run and sleep | typ 6.15 uA/MHz | 110 |
| FMAC | Range 1 Boost mode | typ 4.59 uA/MHz | 110 |
| FMAC | Range 1 Normal mode | typ 4.29 uA/MHz | 110 |
| FMAC | Range 2 | typ 3.57 uA/MHz | 110 |
| FMAC | Low-power run and sleep | typ 3.83 uA/MHz | 110 |
| Wakeup time from Sleep mode to Run mode tWUSLEEP | typ 11 · max 12 Nb of CPU cycles | 115 | |
| Wakeup time from Low-power sleep mode to Low-power run mode tWULPSLEEP | typ 10 · max 11 Nb of CPU cycles | 115 | |
| Wake up time from Stop 0 mode to Run mode in Flash tWUSTOP0 | Range 1; Wakeup clock HSI16 = 16 MHz | typ 5.8 · max 6 us | 115 |
| Wake up time from Stop 0 mode to Run mode in Flash tWUSTOP0 | Range 2; Wakeup clock HSI16 = 16 MHz | typ 18.4 · max 19.1 us | 115 |
| Wake up time from Stop 0 mode to Run mode in SRAM1 tWUSTOP0 | Range 1; Wakeup clock HSI16 = 16 MHz | typ 2.8 · max 3 us | 115 |
| Wake up time from Stop 0 mode to Run mode in SRAM1 tWUSTOP0 | Range 2; Wakeup clock HSI16 = 16 MHz | typ 2.9 · max 3 us | 115 |
| Wake up time from Stop 1 mode to Run in Flash tWUSTOP1 | Range 1; Wakeup clock HSI16 = 16 MHz | typ 9.5 · max 9.8 us | 115 |
| Wake up time from Stop 1 mode to Run in Flash tWUSTOP1 | Range 2; Wakeup clock HSI16 = 16 MHz | typ 21.9 · max 22.7 us | 115 |
| Wake up time from Stop 1 mode to Run mode in SRAM1 tWUSTOP1 | Range 1; Wakeup clock HSI16 = 16 MHz | typ 6.6 · max 6.9 us | 115 |
| Wake up time from Stop 1 mode to Run mode in SRAM1 tWUSTOP1 | Range 2; Wakeup clock HSI16 = 16 MHz | typ 6.4 · max 6.6 us | 115 |
| Wake up time from Stop 1 mode to Low-power run mode in SRAM1 tWUSTOP1 | Regulator in low-power mode (LPR=1 in PWR_CR1); Wakeup clock HSI16 = 16 MHz, with HPRE = 8; maximum characterized from 0°C to 125°C | typ 14.4 · max 15 us | 115 |
| Wakeup time from Standby mode to Run mode tWUSTBY | Range 1; Wakeup clock HSI16 = 16 MHz | typ 29.7 · max 33.8 us | 115 |
| Wakeup time from Standby with SRAM2 to Run mode tWUSTBY SRAM2 | Range 1; Wakeup clock HSI16 = 16 MHz | typ 29.7 · max 33.5 us | 115 |
| Wakeup time from Shutdown mode to Run mode tWUSHDN | Range 1; Wakeup clock HSI16 = 16 MHz; maximum characterized from 0°C to 125°C | typ 267.9 · max 274.6 us | 115 |
| Wakeup time from Low-power run mode to Run mode tWULPRUN | Wakeup clock HSI16 = 16 MHz with HPRE = 8; time until REGLPF flag is cleared in PWR_SR2 | typ 5 · max 7 us | 115 |
| Oscillator frequency fOSC_IN | min 4 · typ 8 · max 48 MHz | 118 | |
| Feedback resistor RF | typ 200 kΩ | 118 | |
| HSE current consumption IDD(HSE) | During startup; first 2/3 of startup time | max 5.5 mA | 118 |
| HSE current consumption IDD(HSE) | VDD = 3 V; Rm = 30 Ω; CL = 10 pF@8 MHz | typ 0.44 mA | 118 |
| HSE current consumption IDD(HSE) | VDD = 3 V; Rm = 45 Ω; CL = 10 pF@8 MHz | typ 0.45 mA | 118 |
| HSE current consumption IDD(HSE) | VDD = 3 V; Rm = 30 Ω; CL = 5 pF@48 MHz | typ 0.68 mA | 118 |
| HSE current consumption IDD(HSE) | VDD = 3 V; Rm = 30 Ω; CL = 10 pF@48 MHz | typ 0.94 mA | 118 |
| HSE current consumption IDD(HSE) | VDD = 3 V; Rm = 30 Ω; CL = 20 pF@48 MHz | typ 1.77 mA | 118 |
| Maximum critical crystal transconductance Gm | Startup | max 1.5 mA/V | 118 |
| Startup time tSU(HSE) | VDD is stabilized; stabilized 8 MHz oscillation | typ 2 ms | 118 |
| Electrostatic discharge voltage (human body model) VESD(HBM) | TA = +25 °C; ANSI/ESDA/JEDEC JS-001; class 2 | max 2000 V | 127 |
| Electrostatic discharge voltage (charge device model) VESD(CDM) | Other packages, including UFQFPN48; TA = +25 °C; ANSI/ESDA/JEDEC JS-002; class C2a | max 500 V | 127 |
| Output low level voltage for an I/O pin VOL | CMOS port; |IIO| = 2 mA for FT_c I/Os, 8 mA for other I/Os; VDD ≥ 2.7 V | max 0.4 V | 131 |
| Output low level voltage for an I/O pin VOL | TTL port; |IIO| = 2 mA for FT_c I/Os, 8 mA for other I/Os; VDD ≥ 2.7 V | max 0.4 V | 131 |
| Output high level voltage for an I/O pin VOH | TTL port; |IIO| = 2 mA for FT_c I/Os, 8 mA for other I/Os; VDD ≥ 2.7 V | min 2.4 V | 131 |
| Output low level voltage for an I/O pin VOL | All I/Os except FT_c; |IIO| = 20 mA; VDD ≥ 2.7 V | max 1.3 V | 131 |
| Output low level voltage for an I/O pin VOL | |IIO| = 1 mA for FT_c I/Os, 4 mA for other I/Os; VDD ≥ 1.62 V | max 0.4 V | 131 |
| Output low level voltage for an FT I/O pin in FM+ mode (FT I/O with “f” option) VOLFM+ | |IIO| = 20 mA; VDD ≥ 2.7 V | max 0.4 V | 131 |
| Output low level voltage for an FT I/O pin in FM+ mode (FT I/O with “f” option) VOLFM+ | |IIO| = 10 mA; VDD ≥ 1.62 V | max 0.4 V | 131 |
| Maximum frequency Fmax | FM+; C=50 pF, 1.6 V≤VDD≤3.6 V | max 1 MHz | 133 |
| Output high to low level fall time Tr/TF | FM+; C=50 pF, 1.6 V≤VDD≤3.6 V; fall time measured between 70% and 30% | max 5 ns | 133 |
| Maximum frequency Fmax | Speed 0; C=50 pF, 2.7 V≤VDD≤3.6 V | max 2 MHz | 133 |
| Maximum frequency Fmax | Speed 0; C=50 pF, 1.6 V≤VDD≤2.7 V | max 1 MHz | 133 |
| Output H/L to L/H level fall time Tr/Tf | Speed 0; C=50 pF, 2.7 V≤VDD≤3.6 V | max 170 ns | 133 |
| Output H/L to L/H level fall time Tr/Tf | Speed 0; C=50 pF, 1.6 V≤VDD≤2.7 V | max 330 ns | 133 |
| Maximum frequency Fmax | Speed 1; C=50 pF, 2.7 V≤VDD≤3.6 V | max 10 MHz | 133 |
| Maximum frequency Fmax | Speed 1; C=50 pF, 1.6 V≤VDD≤2.7 V | max 5 MHz | 133 |
| Output H/L to L/H level fall time Tr/Tf | Speed 1; C=50 pF, 2.7 V≤VDD≤3.6 V | max 35 ns | 133 |
| Output H/L to L/H level fall time Tr/Tf | Speed 1; C=50 pF, 1.6 V≤VDD≤2.7 V | max 65 ns | 133 |
| USB transceiver operating voltage VDD | TA = -40 to 125 °C; full USB electrical characteristics | min 3 · max 3.6 V | 180 |
| USB crystal less operation temperature tCrystal_less | min -15 · max 85 °C | 180 | |
| Embedded USB_DP pull-up value during idle RPUI | TA = -40 to 125 °C | min 900 · typ 1250 · max 1500 Ω | 180 |
| Embedded USB_PD pull-up value during reception RPUR | TA = -40 to 125 °C | min 1400 · typ 2300 · max 3200 Ω | 180 |
| Output driver impedance ZsDRV | Driving high and low; TA = -40 to 125 °C | min 28 · typ 36 · max 44 Ω | 180 |
| USART clock frequency fCK | Master mode; OSPEEDRy[1:0] = 10; C=30 pF; measurement at 0.5 VDD | max 21 MHz | 180 |
| USART clock frequency fCK | Slave mode; OSPEEDRy[1:0] = 10; C=30 pF; measurement at 0.5 VDD | max 22 MHz | 180 |
| NSS hold time th(NSS) | Slave mode; OSPEEDRy[1:0] = 10; C=30 pF; measurement at 0.5 VDD | min 2 ns | 180 |
| Data input setup time tsu(RX) | Slave mode; OSPEEDRy[1:0] = 10; C=30 pF; measurement at 0.5 VDD | min 2 ns | 180 |
| Data input hold time th(RX) | Master mode; OSPEEDRy[1:0] = 10; C=30 pF; measurement at 0.5 VDD | min 1 ns | 180 |
| Data input hold time th(RX) | Slave mode; OSPEEDRy[1:0] = 10; C=30 pF; measurement at 0.5 VDD | min 0.5 ns | 180 |
| Thermal resistance junction-ambient ΘJA | UFQFPN48 - 7 × 7 mm; table gives a single Value without min/typ/max classification | typ 26.8 °C/W | 229 |
Parameters
19- ADC (Bit)
- 12bit
- CPU Core
- ARM Cortex-M4F
- CPU Maximum Speed
- 170MHz
- Core Size
- 32 Bit
- Current - Supply
- 29.5mA
- Current - Supply(Max)
- 48mA
- DAC (Bit)
- 12bit
- Junction Temperature(Max)
- 150℃
- Number of I/O
- 38
- Operating Temperature
- -40℃~+105℃
- Oscillator Type
- Built-in
- Output Current per Pin(Max)
- 20mA
- Program Memory Type
- FLASH
- Program Storage Size
- 512KB
- RAM Size
- 128KB
- Standby Current
- 130nA
- Thermal Resistance(Junction to Ambient)
- 26.8℃/W
- Voltage - Supply
- 1.55V~3.6V
- Voltage - Supply(Absolute Max)
- 4V
Order codes
1- STM32G474CEU6LCSC C1235412
Pinout
49| Pin | Name | Type |
|---|---|---|
| 1 | VBAT | Power in |
| 2 | PC13 | Input/output |
| 3 | PC14 | Input/output |
| 4 | PC15 | Input/output |
| 5 | PF0 | Input/output |
| 6 | PF1 | Input/output |
| 7 | PG10 | Input/output |
| 8 | PA0 | Input/output |
| 9 | PA1 | Input/output |
| 10 | PA2 | Input/output |
| 11 | PA3 | Input/output |
| 12 | PA4 | Input/output |
| 13 | PA5 | Input/output |
| 14 | PA6 | Input/output |
| 15 | PA7 | Input/output |
| 16 | PC4 | Input/output |
| 17 | PB0 | Input/output |
| 18 | PB1 | Input/output |
| 19 | PB2 | Input/output |
| 20 | VREF+ | Input |
| 21 | VDDA | Power in |
| 22 | PB10 | Input/output |
| 23 | VDD | Power in |
| 24 | PB11 | Input/output |
| 25 | PB12 | Input/output |
| 26 | PB13 | Input/output |
| 27 | PB14 | Input/output |
| 28 | PB15 | Input/output |
| 29 | PC6 | Input/output |
| 30 | PA8 | Input/output |
| 31 | PA9 | Input/output |
| 32 | PA10 | Input/output |
| 33 | PA11 | Input/output |
| 34 | PA12 | Input/output |
| 35 | VDD | Power in |
| 36 | PA13 | Input/output |
| 37 | PA14 | Input/output |
| 38 | PA15 | Input/output |
| 39 | PC10 | Input/output |
| 40 | PC11 | Input/output |
| 41 | PB3 | Input/output |
| 42 | PB4 | Input/output |
| 43 | PB5 | Input/output |
| 44 | PB6 | Input/output |
| 45 | PB7 | Input/output |
| 46 | PB8 | Input/output |
| 47 | PB9 | Input/output |
| 48 | VDD | Power in |
| 49 | VSS | Power in |
Open-source boards using it
All 15- 4 layers30 × 18 mm
- 4 layers90 × 50 mm
- 6 layers56.7 × 54.7 mm
Better md80
darshp848/bldc-controller-60v
60 V, 20 A / 80 A peak BLDC motor controller that fits the MD80 v3.0 mounting. KiCad 10, 6 layers.
144 parts1 - 4 layers67.4 × 67.4 mm
SCLF Gripper
Tknika-SCLF/sclf-gripper
Deskargatu eta instalatu Antigravity bere webgune ofizialetik. VSCode/Windsurf-en fork bat da eta modu berean funtzionatzen du.
78 parts1 - 4 layers
- 4 layers
- 4 layers100 × 56 mm
Show this part on your page
<iframe src="https://pcbkit.io/embed/parts/st/STM32G474CEU6" title="STM32G474CEU6 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/st/STM32G474CEU6.jpg" alt="STM32G474CEU6" width="1200" height="900">[](https://pcbkit.io/parts/st/STM32G474CEU6)Questions
Is there a KiCad symbol and footprint for the STM32G474CEU6?
Yes. The symbol is MCU_ST_STM32G4:STM32G474CEUx and the footprint Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the STM32G474CEU6?
UFQFPN-48(7x7), with 49 pins. Its footprint is drawn on this page.
Where is the STM32G474CEU6 datasheet?
STMicroelectronics publishes it: the Datasheet link on this page opens it.
Where can I order the STM32G474CEU6?
JLCPCB lists it as part C1235412, with 70 in stock; the sellers' links on this page open their listings.
What can replace the STM32G474CEU6?
Parts like it in the library: the STM32G431CBU6 by STMicroelectronics, the STM32G473CEU6 by STMicroelectronics, the STM32H523CEU6 by STMicroelectronics and the STM32G473CBU6 by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the STM32G474CEU6?
15 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.
Parts like it
8
STM32G431CBU6
UFQFPN-48(7x7)-40℃~+85℃ 1.71V~3.6V 128KB 12bit 12bit 170MHz 32 Bit 32KB 42 ARM Cortex-M4F Built-in FLASH UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32G473CEU6
UFQFPN-48(7x7)-40℃~+85℃ 1.71V~3.6V 128KB 12bit 12bit 170MHz 32 Bit 42 512KB ARM Cortex-M4 Built-in FLASH UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32H523CEU6
UFQFPN-48-EP(7x7)-40℃~+85℃ 1.71V~3.6V 250MHz 272KB 32 Bit 35 512KB ARM Cortex-M33 Built-in+External FLASH UFQFPN-48-EP(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32G473CBU6
UFQFPN-48(7x7)1.71V~3.6V 12bit 12bit 170MHz 42 ARM Cortex-M4 FLASH UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32G473CCU6
UFQFN-481.71V~3.6V 12bit 12bit 170MHz 42 ARM Cortex-M4 UFQFN-48 Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32H523CCU6
UFQFPN-48-EP(7x7)Microcontrollers (MCU/MPU/SOC)STMicroelectronicsSTM32G474CCU6
UFQFPN-48(7x7)-40℃~+85℃ 1.71V~3.6V 128KB 12bit 12bit 170MHz 256KB 32 Bit 42 ARM Cortex-M4F Built-in FLASH UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STM32G491CEU6
UFQFPN-48(7x7)-40℃~+85℃ 1.71V~3.6V 12bit 12bit 170MHz 32 Bit 42 512KB ARM Cortex-M4F Built-in FLASH UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)