4 layers89.8 × 41.5 mm
4 layers89.8 × 41.5 mm
BldcDriver
dwanpo/balancer1- Size
- 89.8 × 41.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 187
- Nets
- 158
- Pads
- 640
- Tracks, vias
- 902, 198
- Pours
- 15
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 3 Dec 2023
- Updated
- 25 Jul 2024
Overview
BldcDriver is an open-source printed circuit board by dwanpo, from the dwanpo/balancer repository on GitHub. It is a 4-layer board of 89.8 × 41.5 mm with 187 parts on 158 nets, routed with 902 tracks and 198 vias.
It is built around the FD6288T, MT3608 and TPS5430DDA, with the AMS1117, MPU-6050 and KNY3406C among its other parts. Its parts include 73 resistors, 64 capacitors, 14 transistors, 10 ICs and 9 diodes. It belongs with the STM32 boards of this library.
Main components
10
FD6288T
TSSOP-20-40℃~+125℃ 1.5A 1.8A 12ns 12ns 2.7V 330uA 4.8V~20V 6 800mV Half-Bridge IGBT、MOSFET Under Voltage Protection、Short Circuit Protection TSSOP-20 Gate Drivers ROHSFortior TechGate Drivers
MT3608
SOT-23-6-40℃~+85℃ 1 1.2MHz 100uA、1.6mA 2A 2V~24V Adjustable Boost Boost Built-in No SOT-23-6 DC-DC Converters ROHS西安航天民芯DC-DC Converters
TPS5430DDA
ESOP-8-40℃~+125℃@(TJ) 1 1.221V~32.04V 3A 4.4mA 5.5V~36V 500kHz Adjustable Buck Buck Built-in No ESOP-8 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
AMS1117
1.0 A Low-Dropout Fixed RegulatorAdvanced Monolithic SystemsUncategorised
MPU-6050
QFN-24-EP(4x4)-40℃~+85℃ 16bit 1KB 2.375V~3.46V 5uA Accelerometer Gyroscope I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24-EP(4x4) Accelerometers ROHSTDK InvenSenseAccelerometers
KNY3406C
PDFN-8(5.8x4.9)-55℃~+150℃ 1 N-channel 1.3V 150pF 200pF 3.3nF 41W 55nC@10V 60V 7mΩ@10V 80A N-Channel ±20V PDFN-8(5.8x4.9) MOSFETs ROHSKIA 半导体MOSFETs
1N5819WS
SOD-3231 Independent 1A 25A 40V 500uA@40V 600mV@1A SOD-323 Schottky Diodes ROHSGuangdong HottechSchottky Diodes
1N5712UR-1
DO-213AA150nA@16V 16V 1V@35mA 75mA DO-213AA Schottky DiodesMicrochip TechnologySchottky DiodesMR30PW-F
Through hole插件 New Arrivals ROHSChangzhou Amass ElecUncategorised
S8050
SOT-23-55℃~+150℃ 1 NPN 100MHz 100nA 120 25V 300mW 500mA 5V 600mV NPN SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
Parts
187| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R4, R13, R14, R15, R16, R27, R28, R29, R30, R37, R38, R41, R42, R43, R44 +9 |
| 23 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14, C15, C16, C17, C18, C19, C20, C22, C23, C26, C27, C28, C44, C51, C53, C55 +7 |
| 13 | 100R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R7, R8, R9, R10, R21, R22, R23, R24, R55, R61, R66, R71 |
| 13 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R35, R36, R50, R51, R53, R56, R57, R59, R62, R63, R67, R68 |
| 12 | 10R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R17, R18, R19, R20, R31, R32, R33, R34, R45, R46, R47, R48 |
| 12 | 22uF/25V | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C29, C31, C33, C34, C35, C37, C39, C40, C41, C43, C45, C46 |
| 12 | KNY3406C | balancerDriver:PDFN-8_L4.9-W5.8-P1.27-LS6.1-BL | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12 |
| 6 | 1N5819WS | Diode_SMD:D_SOD-323 | D2, D3, D4, D10, D11, D12 |
| 5 | 2.2n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C24, C62, C63, C64, C65 |
| 5 | 47u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C3, C4, C9, C10 |
| 4 | , , , | ||
| 4 | 1n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C30, C32, C36, C38 |
| 4 | 20mR | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R11, R12, R25, R26 |
| 4 | 4.7u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C52, C54, C56, C59 |
| 3 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R72, R73 |
| 3 | TLV9062xD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6, U8, U9 |
| 2 | 100nF/25V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12, C25 |
| 2 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C13 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11, C42 |
| 2 | 12p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C67, C68 |
| 2 | 1N5712UR | Diode_SMD:D_MELF | D8, D9 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6 |
| 2 | 3.3k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R40 |
| 2 | Conn_01x06 | balancerDriver:CONN-SMD_6P-P1.00_MEGASTAR_ZX-SH1.0-6PWT | J3, J5 |
| 2 | FD6288T | balancerDriver:TSSOP-20_L6.5-W4.4-P0.65-LS6.4-BL | U1, U11 |
| 2 | FerriteBead | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | FB1, FB3 |
| 2 | MR30PW-F | balancerDriver:CONN-TH_MR30PW-F | CN1, CN2 |
| 1 | 10u | Inductor_SMD:L_Taiyo-Yuden_MD-4040 | L2 |
| 1 | 10u | Inductor_SMD:L_Sumida_CDMC6D28_7.25x6.5mm | L1 |
| 1 | 25MHz | Crystal:Crystal_SMD_SeikoEpson_FA238-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | 470n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C21 |
| 1 | 63.4k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R39 |
| 1 | AMS1117 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U10 |
| 1 | Conn_01x02 | balancerDriver:CONN-TH_XT30UPB-M | J1 |
| 1 | Conn_01x03 | balancerDriver:CONN-SMD_3P-P1.00_WAFER-SH1.0-3PWB | J4 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | FerriteBead | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | FB2 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | MPU-6050 | Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mm | U4 |
| 1 | MT3608 | Package_TO_SOT_SMD:SOT-23-6 | U7 |
| 1 | PMOS | Package_TO_SOT_SMD:SOT-23 | Q13 |
| 1 | S8050 | Package_TO_SOT_SMD:SOT-23 | Q14 |
| 1 | STM32G431RBTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | TPS5430DDA | Package_SO:TI_SO-PowerPAD-8_ThermalVias | U3 |
Questions
How big is the BldcDriver PCB?
It measures 89.8 × 41.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the BldcDriver use?
187 parts, built around the FD6288T, MT3608, TPS5430DDA and AMS1117. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BldcDriver KiCad files?
From the dwanpo/balancer repository on GitHub, at the commit this page was made from: the board is hardware/bak/bldcDriver/bldcDriver.kicad_pcb and its schematic hardware/bak/bldcDriver/bldcDriver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BldcDriver design in my own project?
Its repository states no licence, so its author keeps all rights: ask dwanpo before reusing the design.
More from dwanpo/balancer
7- 4 layers89.8 × 41.5 mm
- 4 layers89.8 × 41.5 mm
- 2 layers89.8 × 41.5 mm
- 2 layers89.8 × 41.5 mm
- 2 layers100 × 53.9 mm
- 2 layers32 × 14 mm
Similar boards
- 2 layers45 × 45 mm
- 2 layers99.5 × 99.1 mm
- 2 layers55 × 23 mm
- 2 layers130 × 95 mm
Ax7010 servo reva
magic-alt/fpga-servo
This directory preserves the ADS8588S legacy PCB, native project and custom rules from b0172a2f65902c7281cf4a8454f192dc791a9ef9.
166 parts - 2 layers108.5 × 69.9 mm
- 4 layers100 × 80 mm
Hackathon board v2
Brian-Nziza/ESP32-Hackathon-Board
KiCad 10 project. Board is 100 × 80 mm, four layers, fabricated by JLCPCB.
75 parts - 4 layers80 × 50 mm
- 2 layers189.5 × 204.9 mm
SmartSpin2k Panelized
doudar/SmartSpin2k
Transform your spin bike into a Smart Trainer!
749 parts292GPL-2.0