

Bat rf
- Size
- 89.8 × 41.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 105
- Nets
- 69
- Pads
- 293
- Tracks, vias
- 575, 96
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 3 Dec 2023
- Updated
- 25 Jul 2024
Overview
Bat rf is an open-source printed circuit board by dwanpo, from the dwanpo/balancer repository on GitHub. It is a 2-layer board of 89.8 × 41.5 mm with 105 parts on 69 nets, routed with 575 tracks and 96 vias.
It is built around the ESP32-C3-WROOM-02-N4, MT2492 and IP2325_5M_WHJC, with the XC6220B331MR, 1N4148W and IRFH7440TRPBF among its other parts. Its parts include 31 capacitors, 23 resistors, 20 diodes, 6 ICs and 5 connectors. It belongs with the radio and wireless boards and the ESP32 and RISC-V boards of this library.
Main components
7ESP32-C3-WROOM-02-N4
SMD,20x18mm-105dBm -40℃~+85℃ 2.4GHz 20.5dBm 345mA 3V~3.6V 82mA Bluetooth5.0 ESP32-C3 Chip Integrated Bluetooth function、Support USB interface On-board PCB Antenna UART、SPI、I2C、I2S、JTAG、USB SMD,20x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesMT2492
SOT-23-6-40℃~+85℃@(TA) 1 2A 4.5V~16V 600kHz Adjustable Buck Buck Built-in Yes SOT-23-6 DC-DC Converters ROHS西安航天民芯DC-DC ConvertersIP2325_5M_WHJC
ESOP-8Battery ManagementINJOINICXC6220B331MR
SOT-23-5-40℃~+85℃@(Ta) 1 25uA 3.3V 400mV@(800mA) 5.5V 50dB@(10kHz) 900mA Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching DiodesIRFH7440TRPBF
PG-TDSON-8-55℃~+150℃ 1 N-channel 1.8mΩ@10V 104W 138nC 159A 2.2V 4.574nF 40V 466pF PQFN5x6-8 MOSFETs ROHSInfineon TechnologiesMOSFETsTS-1199A-B-B
SMD,6x6mm-30℃~+85℃ 100,000 cycles 12V 2N 50mA 5mm 6mm 6mm Black No Round Button SPST Surface Mount,Vertical Without Bracket SMD,6x6mm Tactile Switches ROHSXKB ConnectionTactile Switches
Parts
105| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C11, C13, C14, C16, C17, C18, C27, C30, C31, C32, C33, C34, C35, C36, C37 +3 |
| 12 | XL-4020RGBC-WS2812B | bat_rf:LED-SMD_4P-L4.0-W1.7_M4020-03003-RGB-862-001 | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8, LED9, LED10, LED11, LED12 |
| 8 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP5, TP7, TP9, TP11 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R7, R8, R12, R21 |
| 4 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C28, C29, C40 |
| 4 | 3k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R5, R13, R15 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2_Pad | H1, H2, H3, H4 |
| 3 | 1N4148W | Diode_SMD:D_SOD-123 | D1, D5, D7 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14, R16, R20 |
| 2 | 100R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R19 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C8 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C15 |
| 2 | 2.2u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C4 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10, C26 |
| 2 | Conn_01x01_Pin | TestPoint:TestPoint_Pad_D4.0mm | J2, J5 |
| 1 | 0.5R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R23 |
| 1 | 10uH | Inductor_SMD:L_Chilisin_BMRA00040420 | L1 |
| 1 | 160k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R22 |
| 1 | 2.2uH | Inductor_SMD:L_Taiyo-Yuden_NR-40xx_HandSoldering | L2 |
| 1 | 22k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 1 | 3*4*2.5MM_贴片4脚 | bat_rf:SW-SMD_4P-L4.2-W3.3-P2.15-LS5.1 | SW1 |
| 1 | 3m | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 500R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R17 |
| 1 | 51k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18 |
| 1 | 5k1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 7.5m | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | AllPower__AP2300 | bat_rf:SOT-23 | Q5 |
| 1 | B_LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D13 |
| 1 | Conn_01x06 | kicadLib:CONN-SMD_6P-P1.00_XYECONN_XY-SH1.0-6A61 | J3 |
| 1 | ESP32-C3-WROOM-02-N4 | bat_rf:BULETM-SMD_18P-L20.0-W18.0-P1.50_ESP32-C3-WROOM | U1 |
| 1 | FPC_0.5MM_4P_Vertical_mounting_type_H2.0mm | bat_rf:FPC-SMD_4P-L7.5-W2.0-P0.50 | P1 |
| 1 | FerriteBead_Small | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | FB1 |
| 1 | G_LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3 |
| 1 | IP2325_5M_WHJC | bat_rf:ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP3.1 | U2 |
| 1 | IRFH7440TRPBF | bat_rf:DFN-8_L5.8-W4.9-P1.27-LS6.0-BL-1 | Q1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D6 |
| 1 | MLT-8530-5V | bat_rf:BUZ-SMD_4P-L8.5-W8.5-TL | U5 |
| 1 | MT2492 | bat_rf:SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | U3 |
| 1 | RED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | SS8050_C7420370 | bat_rf:SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | U4 |
| 1 | TS-1199A-B-B | bat_rf:SW-SMD_L4.0-W2.9-LS5.0 | SW3 |
| 1 | USB_C_Receptacle_PowerOnly_6P | bat_rf:USB-C-SMD_HX-TYPE-C-6PIN | J1 |
| 1 | XC6220B331MR | Package_TO_SOT_SMD:SOT-23-5 | U7 |
| 1 | Y_LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4 |
| 1 | doubleBatCell | bat_rf:BAT-SMD_BH-18650-B1BA007 | BT1 |
More from dwanpo/balancer
7- 4 layers89.8 × 41.5 mm

- 4 layers89.8 × 41.5 mm

- 4 layers89.8 × 41.5 mm

- 4 layers89.8 × 41.5 mm

- 2 layers89.8 × 41.5 mm

- 2 layers100 × 53.9 mm

- 2 layers32 × 14 mm

Similar boards
- 6 layers100 × 100 mm

Usb power board
bluesatunsw/owr
This repo includes all software necessary to operate the Test Rover Platform that is being designed and developed in the 502 project.
409 parts5Apache-2.0 - 4 layers100 × 100 mm

- 2 layers61 × 50 mm

SlimeVR board
Skaut0071/SlimeVR_Tracker
Cutsom PCB based on SlimeVR project for Full Body Tracking for Virtual Reality without need of expensive base stations.
43 parts1 - 2 layers75.1 × 100 mm

- 4 layers100 × 90 mm

- 4 layers128 × 60 mm

- 4 layers65 × 40.1 mm

Aero Zero
ChladpavPy/Aero-Zero
I started this project, because I wanted to build fully autonomous ai drone. When I looked at the flight controllers available on the market, they were full of hardware that I just do not need or just that I could not…
97 parts - 2 layers146.5 × 75.4 mm

3leaf left
marcuswu/leaf-fold
After building my first keyboard, a Lily58, I started following r/ErgoMechKeyboards, r/olkb, and r/MechanicalKeyboards.
62 partsMIT
Questions
How big is the Bat rf PCB?
It measures 89.8 × 41.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Bat rf use?
105 parts, built around the ESP32-C3-WROOM-02-N4, MT2492, IP2325_5M_WHJC and XC6220B331MR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bat rf KiCad files?
From the dwanpo/balancer repository on GitHub, at the commit this page was made from: the board is hardware/rfBat/bat_rf.kicad_pcb and its schematic hardware/bak/bldcDriver/bldcDriver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bat rf design in my own project?
Its repository states no licence, so its author keeps all rights: ask dwanpo before reusing the design.