

Beam Deflector Board
All the electrical designs for MECSEM.
- Size
- 80 × 50 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 100
- Nets
- 58
- Pads
- 326
- Tracks, vias
- 551, 82
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 27 Apr 2026
- Updated
- 27 Apr 2026
Overview
Beam Deflector Board is an open-source printed circuit board by MECSEM, from the MECSEM/electrical repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 80 × 50 mm with 100 parts on 58 nets, routed with 551 tracks and 82 vias.
It is built around the TPS5430DDA, LT1468CS8 and OPA548T, with the SN65LVDS2DBV, ADA4510-2 and AMS1117 among its other parts. Its parts include 37 capacitors, 32 resistors, 10 ICs, 6 diodes and 3 connectors. It belongs with the RP2350 boards of this library.
Main components
11TPS5430DDA
ESOP-8-40℃~+125℃@(TJ) 1 1.221V~32.04V 3A 4.4mA 5.5V~36V 500kHz Adjustable Buck Buck Built-in No ESOP-8 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersLT1468CS8
SOIC890MHz, 22V/us 16-Bit Accurate Operational AmplifierAnalog DevicesUncategorisedOPA548T
TO-220-7-30V~-4V、4V~30V -40℃~+85℃ 1 10V/us 17mA 1MHz 2mV 30uV/℃ 3A 500nA 50nA 8V~60V 90nV/√Hz@1kHz 95dB Enable/shutdown function TO-220-7 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierSN65LVDS2DBV
SOT-23-5-40℃~+85℃ 0 1 2.4V~3.6V 400Mbps LVDS Receiver SOT-23-5 LVDS ICs ROHSTexas InstrumentsLVDS ICsADA4510-2
SOIC-8SOIC-8 New Arrivals ROHSAnalog DevicesUncategorisedAMS1117
1.0 A Low-Dropout Fixed RegulatorAdvanced Monolithic SystemsUncategorisedAO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsH5VHD3U
SOD-323-55℃~+125℃ 14V 185pF 200nA 25A@8/20us 350W@8/20us 5V 9V ESD IEC 61000-4-2、IEC 61000-4-5 Single-channel Unidirectional SOD-323 ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)SS54
SMA(DO-214AC)-55℃~+125℃ 1mA@40V 40V 550mV@5A 5A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky DiodesH3V3HD3B
SOD-323-55℃~+125℃ 100pF 17V 25A@8/20us 3.3V 375W@8/20us 500nA 8V Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 Single-channel SOD-323 ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)SMBJ6.5CA
DO-214AA(SMB)-55℃~+150℃ 1 11.2V 500uA 53.57A 6.5V 600W 7.22V Bidirectional IEC 61000-4-2 TVS DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)
Parts
100| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10uF | PCM_JLCPCB:C_1206 | C6, C8, C11, C12, C15, C18, C27, C29 |
| 6 | 100nF | PCM_JLCPCB:C_0402 | C21, C22, C28, C30, C35, C36 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric | R5, R6, R7, R8, R16 |
| 5 | 1kΩ | PCM_JLCPCB:R_0603 | R10, R11, R14, R18, R22 |
| 4 | 10uF | Capacitor_SMD:C_1206_3216Metric | C2, C3, C4, C5 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H4, H5, H6, H7 |
| 3 | 100Ω | PCM_JLCPCB:R_0402 | R27, R28, R29 |
| 3 | 10Ω | PCM_JLCPCB:R_0402 | R30, R31, R32 |
| 3 | SN65LVDS2DBV | Package_TO_SOT_SMD:SOT-23-5 | U7, U8, U9 |
| 3 | ~ | PCM_JLCPCB:Hole_Tooling_JLCPCB | H1, H2, H3 |
| 2 | 1 | Resistor_THT:R_Axial_DIN0922_L20.0mm_D9.0mm_P7.62mm_Vertical | R9, R12 |
| 2 | 1.5 | Resistor_THT:R_Axial_DIN0516_L15.5mm_D5.0mm_P5.08mm_Vertical | R20, R21 |
| 2 | 1.8kΩ | PCM_JLCPCB:R_0603 | R2, R4 |
| 2 | 10kΩ | PCM_JLCPCB:R_0402 | R23, R25 |
| 2 | 10nF | Capacitor_SMD:C_0805_2012Metric | C9, C10 |
| 2 | 10nF | PCM_JLCPCB:C_0402 | C31, C33 |
| 2 | 150Ω | PCM_JLCPCB:R_0402 | R24, R26 |
| 2 | 1uF | PCM_JLCPCB:C_0603 | C32, C34 |
| 2 | 220uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C16, C17 |
| 2 | 22pF | PCM_JLCPCB:C_0603 | C19, C20 |
| 2 | 22uF | Capacitor_SMD:C_1206_3216Metric | C13, C14 |
| 2 | 33uH | FYDPLIB:L_Radial_D10.5mm_P4.00x5.00mm_Murata_1200RS | L1, L2 |
| 2 | 470uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C25, C26 |
| 2 | 8.2kΩ | PCM_JLCPCB:R_0603 | R1, R3 |
| 2 | AO3400A | PCM_JLCPCB:Q_SOT-23 | Q1, Q2 |
| 2 | H5VHD3U | PCM_JLCPCB:D_SOD-323 | D3, D4 |
| 2 | SS54 | Diode_SMD:D_SMA | D1, D2 |
| 2 | TPS5430DDA | Package_SO:TI_SO-PowerPAD-8_ThermalVias | U1, U2 |
| 1 | 100kΩ | PCM_JLCPCB:R_0603 | R15 |
| 1 | 10uF | PCM_JLCPCB:C_0805 | C7 |
| 1 | 2.2nF | PCM_JLCPCB:C_0805 | C24 |
| 1 | 220u | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C37 |
| 1 | 22uF | PCM_JLCPCB:C_1206 | C1 |
| 1 | 3.3kΩ | PCM_JLCPCB:R_0603 | R17 |
| 1 | 33n | Capacitor_SMD:C_0805_2012Metric | C23 |
| 1 | 39kΩ | PCM_JLCPCB:R_0603 | R19 |
| 1 | 3k | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | ADA4510-2 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | AMS1117 | PCM_JLCPCB:SOT-223-3_L6.5-W3.4-P2.30-LS7.0-BR | U10 |
| 1 | DAC80501MDGSR | FYDPLIB:VSSOP-10_L3.0-W3.0-P0.50-LS4.9-BL | U3 |
| 1 | DEFLECTOR AXIS | FYDPLIB:Molex_Micro-Fit_3.0_43650-0200_1x02_P3.00mm_Horizontal | J2 |
| 1 | H3V3HD3B | PCM_JLCPCB:D_SOD-323 | D6 |
| 1 | LT1468 | FYDPLIB:SO-8_L4.9-W3.9-P1.27-LS5.9-BL | U5 |
| 1 | Micro-Fit 3.0 2x4 | FYDPLIB:Molex_Micro-Fit_3.0_43045-0800_2x04_P3.00mm_Horizontal | J1 |
| 1 | OPA548T | FYDPLIB:OPA548T | U6 |
| 1 | RJ45_LED_Shielded | Connector_RJ:RJ45_Amphenol_RJHSE538X | J3 |
| 1 | SMBJ6.5CA | PCM_JLCPCB:D_SMB | D5 |
| 1 | ~ | PCM_JLCPCB:Part_Num_JLCPCB | PN1 |
More from MECSEM/electrical
12- 4 layers120 × 120 mm

- 4 layers100 × 100 mm

- 4 layers100 × 100 mm

- 4 layers72 × 50 mm

- 4 layers100 × 70 mm

- 4 layers95 × 74 mm

- 4 layers70 × 50 mm

- 4 layers78 × 53 mm

- 4 layers100 × 65 mm

- 4 layers100 × 50 mm

- 4 layers100 × 50 mm

- 4 layers37.5 × 22 mm

Similar boards
- 2 layers160 × 110 mm

Acquedotto test v4 finale
igorilla666/water-controller
Scheda di controllo basata sul modulo Waveshare ESP32-S3-ETH, con ingressi sensore, RS-485, pilotaggio rele, buzzer e alimentazione/protezioni dedicate.
139 parts1CERN-OHL-S-2.0 - 8 layers160 × 100 mm

- 4 layers160 × 100 mm

Smu main
PaulBichl/vibepcb-smu
VibePCB example: 4-quadrant SMU (+-30 V / +-1 A, USB-C PD, Ethernet) designed with an LLM
244 parts1 - 2 layers55 × 73.5 mm

Pcb dezentral
petermaerki/puenterswis_heizung_2023_git
Puenterswis Heizungsersatz, Steuerung Anlage mit Oekofen Kaskade Pellematic Maxi PESK
98 parts1 - 4 layers157 × 105 mm

Abx motion
levdan159/abx-motion
ABX-Motion 12V-32V ESP32-S3 4-Layer Robotics Controller (Dual 100W DC Servo H-Bridges, Dual Steppers, Dual Relays, CAN, RS-485, USB-C)
203 parts - 6 layers160 × 101.4 mm

- 2 layers100 × 100 mm

- 2 layers87 × 55.9 mm

Questions
How big is the Beam Deflector Board PCB?
It measures 80 × 50 mm and has 4 copper layers, 1.61 mm thick.
What parts does the Beam Deflector Board use?
100 parts, built around the TPS5430DDA, LT1468CS8, OPA548T and SN65LVDS2DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Beam Deflector Board KiCad files?
From the MECSEM/electrical repository on GitHub, at the commit this page was made from: the board is LV-Misc/Beam Deflector Board/Beam Deflector Board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Beam Deflector Board design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).