4 layers89.8 × 41.5 mm
4 layers89.8 × 41.5 mm
BldcDriver
dwanpo/balancer1- Size
- 89.8 × 41.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 211
- Nets
- 148
- Pads
- 655
- Tracks, vias
- 1,137, 266
- Pours
- 17
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 3 Dec 2023
- Updated
- 25 Jul 2024
Overview
BldcDriver is an open-source printed circuit board by dwanpo, from the dwanpo/balancer repository on GitHub. It is a 4-layer board of 89.8 × 41.5 mm with 211 parts on 148 nets, routed with 1,137 tracks and 266 vias.
It is built around the EG2133, TPS5430DDA and HC-FPC-0.5-6P-CSH20, with the 1N4148W, EMB09N03V and FR107 among its other parts. Its parts include 57 resistors, 56 capacitors, 21 diodes, 12 transistors and 10 ICs. It belongs with the STM32 boards of this library.
Main components
9
EG2133
TSSOP-20-300mV~1V -40℃~+125℃ 1.2A 1.4A 100nA 20ns 25ns 4.5V~20V Half-Bridge、Three Phase IGBT、MOSFET TSSOP-20 Gate Drivers ROHSEG MicroGate Drivers
TPS5430DDA
ESOP-8-40℃~+125℃@(TJ) 1 1.221V~32.04V 3A 4.4mA 5.5V~36V 500kHz Adjustable Buck Buck Built-in No ESOP-8 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
HC-FPC-0.5-6P-CSH20
SMD,P=0.5mm,卧贴FFC, FPC (Flat Flexible) Connector AssembliesHong Cheng
1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching DiodesEMB09N03V
PowerTDFN-8(3.1x3.1)-55℃~+150℃ 1 N-channel 17.6nC@10V 174pF 20A 21W 30V 3V 828pF PowerTDFN-8(3.1x3.1) MOSFETs ROHSEMCMOSFETsFR107
SOD-123-65℃~+150℃ 1.3V@1A 1A 1kV 25A 500ns 5uA@1kV SOD-123 Fast Recovery / High Efficiency Diodes ROHSJSMSEMIFast Recovery / High Efficiency DiodesMR30PW-F
Through hole插件 New Arrivals ROHSChangzhou Amass ElecUncategorised
1N5712UR-1
DO-213AA150nA@16V 16V 1V@35mA 75mA DO-213AA Schottky DiodesMicrochip TechnologySchottky Diodes
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
Parts
211| Qty | Value | Footprint | References |
|---|---|---|---|
| 31 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23, TP24, TP25 +15 |
| 25 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C10, C16, C17, C18, C19, C20, C21, C22, C24, C25, C26, C29, C30, C31, C38 +9 |
| 12 | 100R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R22, R23, R24, R25, R26, R27, R28, R29, R35, R37, R50, R52 |
| 12 | 10R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5, R6, R7, R8, R13, R14, R15, R16, R17, R18, R19 |
| 12 | 1N4148W | Diode_SMD:D_SOD-123 | D5, D6, D9, D16, D17, D18, D19, D20, D21, D22, D23, D24 |
| 12 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20, R21, R30, R32, R38, R39, R41, R42, R43, R44, R46, R49 |
| 12 | EMB09N03V | balancerDriver:POWERTDFN-8_L3.1-W3.1-P0.65-LS3.3-BL | Q1, Q2, Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q14, Q15, Q16 |
| 9 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R31, R33, R34, R36, R45, R47, R48, R51 |
| 9 | 47u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5, C6, C7, C12, C14, C33, C34, C49, C51 |
| 6 | 3k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R40, R54, R55, R56, R57, R58 |
| 6 | FR107 | balancerDriver:SOD-123FL_L2.7-W1.8-LS3.8-RD | D2, D3, D4, D7, D10, D11 |
| 6 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2, TP3, TP4, TP5, TP6 |
| 4 | , , , | ||
| 4 | 10mR | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R9, R10, R11, R12 |
| 4 | 1n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C28, C35, C36, C37 |
| 4 | 2.2n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11, C27, C41, C42 |
| 4 | 4.7u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C39, C43, C44 |
| 3 | TLV9062xD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6, U7, U8 |
| 2 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C13 |
| 2 | 12p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C67, C68 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C15, C32 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | EG2133 | balancerDriver:eg2133 | U1, U2 |
| 2 | FerriteBead | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | FB1, FB4 |
| 2 | HC-FPC-0.5-6P-CSH20 | balancerDriver:FPC-SMD_6P-P0.50_HC-FPC-0.5-6P-CSH20 | U4, U10 |
| 2 | MR30PW-F | balancerDriver:CONN-SMD_3P-P1.00_BX-SH1.0-3PWT | CN1, CN2 |
| 2 | SW_Push | balancerDriver:SW-SMD_L4.0-W2.9-LS5.0 | SW1, SW2 |
| 1 | 10u | Inductor_SMD:L_Taiyo-Yuden_NR-40xx_HandSoldering | L1 |
| 1 | 1N5712UR | balancerDriver:SMA_L4.3-W2.6-LS5.0-RD | D1 |
| 1 | 2.2u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C23 |
| 1 | 25MHz | Crystal:Crystal_SMD_SeikoEpson_FA238-4Pin_3.2x2.5mm | Y1 |
| 1 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 470n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8 |
| 1 | 5.9k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | Conn_01x02 | Connector_AMASS:AMASS_XT30U-M_1x02_P5.0mm_Vertical | J1 |
| 1 | Conn_01x06 | balancerDriver:CONN-SMD_6P-P1.00_MEGASTAR_ZX-SH1.0-6PWT | J2 |
| 1 | FPC_0.5MM_4P_Vertical_mounting_type_H2.0mm | balancerDriver:FPC-SMD_4P-L7.5-W2.0-P0.50 | P1 |
| 1 | FerriteBead | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | FB2 |
| 1 | FerriteBead | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | FB3 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D8 |
| 1 | MPU6500 | balancerDriver:QFN24_3X3X0P9_IVS-L | U9 |
| 1 | R_Potentiometer | balancerDriver:RES-ADJ-TH_3362P | RV1 |
| 1 | STM32G431CBUx | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U5 |
| 1 | TPS5430DDA | Package_SO:TI_SO-PowerPAD-8_ThermalVias | U3 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D12 |
More from dwanpo/balancer
7- 4 layers89.8 × 41.5 mm
- 4 layers89.8 × 41.5 mm
- 2 layers89.8 × 41.5 mm
- 2 layers89.8 × 41.5 mm
- 2 layers100 × 53.9 mm
- 2 layers32 × 14 mm
Similar boards
- 6 layers240 × 207 mm
- 4 layers60 × 80 mm
- 2 layers45 × 45 mm
- 4 layers70 × 56 mm
- 2 layers48.3 × 65.3 mm
- 2 layers46.7 × 87.5 mm
Servo motor
tomrodinger/servomotor
Open-source NEMA-17 integrated servomotor (motor + closed-loop driver + controller + encoder). RS-485, Python/Arduino libraries, MCP server for AI control. Hardware, firmware and software.
112 parts17MIT - 4 layers95.5 × 54 mm
- 4 layers288.5 × 95 mm
OTTO Beta Main
bitfieldaudio/otto-hardware
OTTO hardware files for upcoming beta. WORK IN PROGRESS
331 parts37
Questions
How big is the BldcDriver PCB?
It measures 89.8 × 41.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the BldcDriver use?
211 parts, built around the EG2133, TPS5430DDA, HC-FPC-0.5-6P-CSH20 and 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BldcDriver KiCad files?
From the dwanpo/balancer repository on GitHub, at the commit this page was made from: the board is hardware/motor/bldcDriver.kicad_pcb and its schematic hardware/bak/bldcDriver/bldcDriver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BldcDriver design in my own project?
Its repository states no licence, so its author keeps all rights: ask dwanpo before reusing the design.