2 layers25.4 × 54.5 mm
Rpi pico debugger shoe
ShawnHymel/rpi-pico-debugger-shoe
Stackable debugger board for the Raspberry Pi Pico. Solder long headers to this debugger board in order to connect the Pico to it.
49 parts84
2 layers48.3 × 65.3 mm
Rpi pico debugger shoe
vow-eng/OT2_temperature_modulePeltier controller for SBS plate
- Size
- 48.3 × 65.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 83
- Nets
- 84
- Pads
- 318
- Tracks, vias
- 720, 162
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221232)
- Created
- 27 Apr 2022
- Updated
- 25 Apr 2022
Overview
Rpi pico debugger shoe is an open-source printed circuit board by vow-eng, from the vow-eng/OT2_temperature_module repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 48.3 × 65.3 mm with 83 parts on 84 nets, routed with 720 tracks and 162 vias.
It is built around the RP2040, EG2133 and MC34063AD, with the W25Q16JVSSIQ, AO4406AL and B5819W among its other parts. Its parts include 23 capacitors, 23 resistors, 11 ICs, 8 connectors and 7 diodes. It belongs with the interfaces and adapters boards and the RP2040 boards of this library.
Main components
10
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
EG2133
TSSOP-20-300mV~1V -40℃~+125℃ 1.2A 1.4A 100nA 20ns 25ns 4.5V~20V Half-Bridge、Three Phase IGBT、MOSFET TSSOP-20 Gate Drivers ROHSEG MicroGate Drivers
MC34063AD
SOIC-80℃~+70℃@(TA) 1 1.25V~40V 1.5A 100kHz 3V~40V Adjustable Boost、Buck Buck、Boost Built-in No SOIC-8 DC-DC Converters ROHSonsemiDC-DC Converters
W25Q16JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 10uA 133MHz 16Mbit 2.7V~3.6V 20 Years 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHAO4406AL
SOP8-55℃~+150℃ 1 N-channel 1.6V 103pF 10mΩ@10V、17mΩ@4.5V 16nC@10V 2.3W 20A 30V 805pF 82pF N-Channel SOP8 MOSFETs ROHSElecSuperMOSFETs
B5819W
SOD-123-55℃~+125℃ 1.5A 1mA@40V 25A 40V 600mV@1A Standalone SOD-123 Schottky Diodes ROHSMDDSchottky Diodes
150060VS75000
SMD,1.6x0.8mm-40℃~+85℃ 140° 2.4V 20mA 40mcd 570nm 572nm 72mW Discrete Diode Green SMD,1.6x0.8mm LED Indication - Discrete ROHSWürth ElektronikLight Emitting Diodes (LED)
KPJX-4S-S
插件-40℃~+75℃ 48V 7.5A DC Power Jack Right Angle 插件 DC Power Connectors ROHSKyconDC Power Connectors
MBR120VLSFT1G-TP
SOD-123FUncategorisedTECH PUBLIC
PTS810SJK250SMTRLFS
SMD-4P,4.2x3.2mm-40℃~+85℃ 16V 2.5mm 2.6N 3.2mm 4.2mm 50mA J-Lead Round Button SPST Surface Mount,Vertical SMD-4P,4.2x3.2mm Tactile Switches ROHSC&KTactile Switches
README
README.mdHeatpad controller
Desgiend to use use peltiers to keep SBS plate at a constant temprature
hardware consists of a Full hbridge used to control a peltier device Extra mosfet for a fan 2 inputs for thermistors
Modified from the RPi Pico Debugger Shoe #TODO link orignal project
Recommended reading:
License
Schematic and PCB layout files are licensed under the CC BY 4.0 license.
THE DESIGN IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS DESIGN INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS DESIGN.
Parts
83| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C5, C7, C8, C9, C11, C16 |
| 6 | 10R | Resistor_SMD:R_0603_1608Metric | R13, R14, R18, R21, R22, R23 |
| 6 | AO4406AL | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6, U7, U8, U9, U10, U11 |
| 5 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R7, R8, R15, R24 |
| 4 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C20, C21, C22, C23 |
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C10, C12, C14 |
| 4 | B5819W | Diode_SMD:D_SOD-123 | D2, D3, D4, D5 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H5, H6, H7, H8 |
| 3 | Conn_01x02_Female | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5, J9, J12 |
| 2 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R9 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 2 | 27pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C13, C15 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R19, R20 |
| 2 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1, JP3 |
| 1 | 1 | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 100uF | Capacitor_SMD:C_1206_3216Metric | C19 |
| 1 | 100uF | Capacitor_SMD:CP_Elec_8x10.5 | C17 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R17 |
| 1 | 13K | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 150060VS75000 | LED_SMD:LED_0805_2012Metric_Castellated | LED1 |
| 1 | 150060VS75000 | LED_SMD:LED_0805_2012Metric | LED3 |
| 1 | 2.4k | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 220uH | rpi-pico-debugger-shoe:SCCD43 | L1 |
| 1 | 470pF | Capacitor_SMD:C_0603_1608Metric | C18 |
| 1 | Conn_01x02_Female | Connector_Phoenix_MC:PhoenixContact_MC_1,5_2-G-3.81_1x02_P3.81mm_Horizontal | J4 |
| 1 | Conn_01x02_Female | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | J15 |
| 1 | Conn_01x05_Female | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J13 |
| 1 | Crystal_GND2 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | DNP | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | EG2133 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U5 |
| 1 | HT75xx-1-SOT89 | Package_TO_SOT_SMD:SOT-89-3 | U2 |
| 1 | KPJX-4S-S | KPJX-4S-S:KYCON_KPJX-4S-S | J6 |
| 1 | LOGO | LOGO | G*** |
| 1 | MBR120VLSFT1G | mbr120vlsft1g:MBR120VLSFT1G | CR1 |
| 1 | MC34063AD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | PTS810_SJK_250_SMTR_LFS | PTS810 SJK 250 SMTR LFS:PTS810 SJK 250 SMTR LFS | SW1 |
| 1 | RED | LED_SMD:LED_0805_2012Metric_Castellated | LED2 |
| 1 | RP2040 | rp2040:RP2040 | U1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J14 |
| 1 | W25Q16JVSSIQ | W25Q16JVSSIQ:SOIC127P790X216-8N | U3 |
Similar boards
- 2 layers64 × 48.4 mm
Rp2040-ble
kartik2406/rp2040-ble
A PCB that uses RP2040 MCU and HM-BT4502 BLE passthrough module. This enables the RP2040 to communicated with other devices using Bluetooth. The bluetooth module is connected via UART(0)
42 parts5 - 2 layers100 × 60 mm
PPE SENS FUSION
Squarenix17/Weather-Station
Custom 2-layer PCB for the autonomous weather station, designed in KiCad.
72 parts - 2 layers31.8 × 74.2 mm
- 2 layers393.5 × 153.7 mm
- 2 layers393.5 × 153.7 mm
- 2 layers225.6 × 74.6 mm
- 2 layers225.6 × 74.6 mm
Questions
How big is the Rpi pico debugger shoe PCB?
It measures 48.3 × 65.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rpi pico debugger shoe use?
83 parts, built around the RP2040, EG2133, MC34063AD and W25Q16JVSSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rpi pico debugger shoe KiCad files?
From the vow-eng/OT2_temperature_module repository on GitHub, at the commit this page was made from: the board is electronics/rpi-pico-debugger-shoe.kicad_pcb and its schematic electronics/DC-DC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rpi pico debugger shoe design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).