Skip to the content
2 layers89.8 × 41.5 mmBat rf, the printed circuit board in 3D
Size
89.8 × 41.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
91
Nets
61
Pads
264
Tracks, vias
582, 130
Pours
3
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
3 Dec 2023
Updated
25 Jul 2024

Overview

Bat rf is an open-source printed circuit board by dwanpo, from the dwanpo/balancer repository on GitHub. It is a 2-layer board of 89.8 × 41.5 mm with 91 parts on 61 nets, routed with 582 tracks and 130 vias.

It is built around the ESP32-C3-WROOM-02-N4, AMS1117 and IP2325_5M_WHJC, with the XC6220B331MR, 1N4148W and BAT54C among its other parts. Its parts include 28 capacitors, 19 diodes, 18 resistors, 5 ICs and 5 connectors. It belongs with the radio and wireless boards and the ESP32 and RISC-V boards of this library.

Main components

7

Parts

91
QtyValueFootprintReferences
18100nCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C3, C11, C13, C14, C16, C17, C27, C30, C31, C32, C33, C34, C35, C36, C37 +2
12XL-4020RGBC-WS2812Bbat_rf:LED-SMD_4P-L4.0-W1.7_M4020-03003-RGB-862-001LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8, LED9, LED10, LED11, LED12
610uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC2, C4, C12, C28, C29, C40
43kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR3, R5, R13, R15
4MountingHoleMountingHole:MountingHole_2.2mm_M2_PadH1, H2, H3, H4
4TestPointTestPoint:TestPoint_Pad_D1.0mmTP1, TP7, TP9, TP11
310kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR4, R7, R12
21kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR14, R16
21uCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC9, C15
222uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC10, C26
233kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR8, R11
2AllPower__AP2300bat_rf:SOT-23Q2, Q5
2Conn_01x01_PinTestPoint:TestPoint_Pad_D4.0mmJ2, J5
10.5RResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1
1100RResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR6
11N4148WDiode_SMD:D_SOD-123D5
12.2uHInductor_SMD:L_Taiyo-Yuden_NR-40xx_HandSolderingL2
13*4*2.5MM_贴片4脚bat_rf:SW-SMD_4P-L4.2-W3.3-P2.15-LS5.1SW2
13mResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR10
1500RResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR17
151kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR18
15k1Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR2
17.5mResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR9
1AMS1117Package_TO_SOT_SMD:SOT-89-3_HandsolderingU4
1BAT54Cbat_rf:BAT54CD7
1B_LEDLED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderD13
1Conn_01x03bat_rf:CONN-SMD_3P-P1.00_WAFER-SH1.0-3PWBJ4
1Conn_01x06kicadLib:CONN-SMD_6P-P1.00_XYECONN_XY-SH1.0-6A61J3
1ESP32-C3-WROOM-02-N4bat_rf:BULETM-SMD_18P-L20.0-W18.0-P1.50_ESP32-C3-WROOMU1
1FerriteBead_SmallCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderFB1
1G_LEDLED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderD3
1IP2325_5M_WHJCbat_rf:ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP3.1U2
1LEDLED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderD6
1MLT-8530-5Vbat_rf:BUZ-SMD_4P-L8.5-W8.5-TLU5
1Q_PMOS_GDSPackage_TO_SOT_SMD:TO-252-2Q1
1REDLED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderD2
1TS-1199A-B-BButton_Switch_SMD:SW_SPST_B3U-1000PSW3
1USB_C_Receptacle_PowerOnly_6Pbat_rf:USB-C-SMD_HX-TYPE-C-6PINJ1
1XC6220B331MRPackage_TO_SOT_SMD:SOT-23-5U7
1Y_LEDLED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderD4
1doubleBatCellbat_rf:BAT-SMD_BH-18650-B1BA007BT1

More from dwanpo/balancer

7
  • 4 layers89.8 × 41.5 mmBldcDriver, the printed circuit board in 3D

    BldcDriver

    dwanpo/balancer

    211 parts1
  • 4 layers89.8 × 41.5 mmBldcDriver, the printed circuit board in 3D

    BldcDriver

    dwanpo/balancer

    198 parts1
  • 4 layers89.8 × 41.5 mmBldcDriver, the printed circuit board in 3D

    BldcDriver

    dwanpo/balancer

    189 parts1
  • 4 layers89.8 × 41.5 mmBldcDriver, the printed circuit board in 3D

    BldcDriver

    dwanpo/balancer

    187 parts1
  • 2 layers89.8 × 41.5 mmBat rf, the printed circuit board in 3D

    Bat rf

    dwanpo/balancer

    105 parts1
  • 2 layers100 × 53.9 mmController, the printed circuit board in 3D

    Controller

    dwanpo/balancer

    41 parts1
  • 2 layers32 × 14 mmEncoder, the printed circuit board in 3D

    Encoder

    dwanpo/balancer

    7 parts1

Similar boards

  • 2 layers61 × 50 mmSlimeVR board, the printed circuit board in 3D

    SlimeVR board

    Skaut0071/SlimeVR_Tracker

    Cutsom PCB based on SlimeVR project for Full Body Tracking for Virtual Reality without need of expensive base stations.

    43 parts1
  • 2 layers124 × 35 mmWfred rev6, the printed circuit board in 3D

    Wfred rev6

    newHeiko/wiFred

    wiThrottle-compatible hardware controller

    87 parts28GPL-3.0
  • 2 layers74 × 45 mmOxygenF7, the printed circuit board in 3D

    OxygenF7

    iBelieve/oxygen

    Oxygen F7 flight controller

    65 parts8
  • 2 layers106.5 × 125.4 mmRP2040 KBD, the printed circuit board in 3D

    RP2040 KBD

    jay94ks/simple-np

    Simple Number Pad based on RP2040

    120 parts1MIT
  • 2 layers40.6 × 51 mmRP2040 TB, the printed circuit board in 3D

    RP2040 TB

    jay94ks/elecdev

    My own custom development boards

    50 partsMIT
  • 4 layers128 × 60 mmNixiClockV1, the printed circuit board in 3D

    NixiClockV1

    zOnlyKroks/pcb-consortium

    117 partsCC0-1.0
  • 4 layers65 × 40.1 mmAero Zero, the printed circuit board in 3D

    Aero Zero

    ChladpavPy/Aero-Zero

    I started this project, because I wanted to build fully autonomous ai drone. When I looked at the flight controllers available on the market, they were full of hardware that I just do not need or just that I could not…

    97 parts
  • 2 layers146.5 × 75.4 mm3leaf left, the printed circuit board in 3D

    3leaf left

    marcuswu/leaf-fold

    After building my first keyboard, a Lily58, I started following r/ErgoMechKeyboards, r/olkb, and r/MechanicalKeyboards.

    62 partsMIT

Questions

How big is the Bat rf PCB?

It measures 89.8 × 41.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Bat rf use?

91 parts, built around the ESP32-C3-WROOM-02-N4, AMS1117, IP2325_5M_WHJC and XC6220B331MR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Bat rf KiCad files?

From the dwanpo/balancer repository on GitHub, at the commit this page was made from: the board is hardware/rfBat/V2.5/bat_rf.kicad_pcb and its schematic hardware/bak/bldcDriver/bldcDriver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Bat rf design in my own project?

Its repository states no licence, so its author keeps all rights: ask dwanpo before reusing the design.