

BldcDriver
- Size
- 89.8 × 41.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 198
- Nets
- 144
- Pads
- 619
- Tracks, vias
- 1,139, 258
- Pours
- 17
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 3 Dec 2023
- Updated
- 25 Jul 2024
Overview
BldcDriver is an open-source printed circuit board by dwanpo, from the dwanpo/balancer repository on GitHub. It is a 4-layer board of 89.8 × 41.5 mm with 198 parts on 144 nets, routed with 1,139 tracks and 258 vias.
It is built around the EG2133, TPS5430DDA and HC-FPC-0.5-6P-CSH20, with the 1N4148W, EMB09N03V and DSK34 among its other parts. Its parts include 51 resistors, 48 capacitors, 21 diodes, 12 transistors and 9 ICs. It belongs with the STM32 boards of this library.
Main components
8EG2133
TSSOP-20-300mV~1V -40℃~+125℃ 1.2A 1.4A 100nA 20ns 25ns 4.5V~20V Half-Bridge、Three Phase IGBT、MOSFET TSSOP-20 Gate Drivers ROHSEG MicroGate DriversTPS5430DDA
ESOP-8-40℃~+125℃@(TJ) 1 1.221V~32.04V 3A 4.4mA 5.5V~36V 500kHz Adjustable Buck Buck Built-in No ESOP-8 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersHC-FPC-0.5-6P-CSH20
SMD,P=0.5mm,卧贴FFC, FPC (Flat Flexible) Connector AssembliesHong Cheng1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching DiodesEMB09N03V
PowerTDFN-8(3.1x3.1)-55℃~+150℃ 1 N-channel 17.6nC@10V 174pF 20A 21W 30V 3V 828pF PowerTDFN-8(3.1x3.1) MOSFETs ROHSEMCMOSFETsDSK34
SOD-123FL-55℃~+125℃ 3A 40V 500uA 520mV@3A 80A Independent SOD-123FL Schottky Diodes ROHSTWGMCSchottky DiodesMR30PW-F
Through hole插件 New Arrivals ROHSChangzhou Amass ElecUncategorised1N5712UR-1
DO-213AA150nA@16V 16V 1V@35mA 75mA DO-213AA Schottky DiodesMicrochip TechnologySchottky Diodes
Parts
198| Qty | Value | Footprint | References |
|---|---|---|---|
| 33 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23, TP24, TP25 +17 |
| 20 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C10, C16, C17, C18, C19, C20, C21, C22, C24, C25, C26, C29, C30, C31, C38 +4 |
| 12 | 100R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R22, R23, R24, R25, R26, R27, R28, R29, R35, R37, R50, R52 |
| 12 | 10R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5, R6, R7, R8, R13, R14, R15, R16, R17, R18, R19 |
| 12 | 1N4148W | Diode_SMD:D_SOD-123 | D5, D6, D9, D16, D17, D18, D19, D20, D21, D22, D23, D24 |
| 12 | EMB09N03V | balancerDriver:POWERTDFN-8_L3.1-W3.1-P0.65-LS3.3-BL | Q1, Q2, Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q14, Q15, Q16 |
| 10 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20, R21, R30, R32, R38, R39, R42, R43, R44, R46 |
| 9 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R31, R33, R34, R36, R45, R47, R48, R51 |
| 9 | 47u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5, C6, C7, C12, C14, C33, C34, C49, C51 |
| 6 | DSK34 | balancerDriver:SOD-123FL_L2.7-W1.8-LS3.8-RD | D2, D3, D4, D7, D10, D11 |
| 6 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2, TP3, TP4, TP5, TP6 |
| 4 | , , , | ||
| 4 | 10mR | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R9, R10, R11, R12 |
| 4 | 1n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C28, C35, C36, C37 |
| 4 | 2.2n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11, C27, C41, C42 |
| 3 | FerriteBead | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | FB1, FB3, FB4 |
| 2 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C13 |
| 2 | 12p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C67, C68 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R53 |
| 2 | EG2133 | balancerDriver:eg2133 | U1, U2 |
| 2 | HC-FPC-0.5-6P-CSH20 | balancerDriver:FPC-SMD_6P-P0.50_HC-FPC-0.5-6P-CSH20 | U4, U10 |
| 2 | MR30PW-F | balancerDriver:CONN-SMD_3P-P1.00_BX-SH1.0-3PWT | CN1, CN2 |
| 2 | SW_Push | balancerDriver:SW-SMD_L4.0-W2.9-LS5.0 | SW1, SW2 |
| 2 | TLV9062xD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6, U7 |
| 1 | 10u | Inductor_SMD:L_Taiyo-Yuden_NR-40xx_HandSoldering | L1 |
| 1 | 1N5712UR | balancerDriver:SMA_L4.3-W2.6-LS5.0-RD | D1 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C32 |
| 1 | 2.2u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C23 |
| 1 | 25MHz | Crystal:Crystal_SMD_SeikoEpson_FA238-4Pin_3.2x2.5mm | Y1 |
| 1 | 3k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R40 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9 |
| 1 | 470n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8 |
| 1 | 5.9k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | Conn_01x02 | Connector_AMASS:AMASS_XT30U-M_1x02_P5.0mm_Vertical | J1 |
| 1 | Conn_01x06 | balancerDriver:CONN-SMD_6P-P1.00_MEGASTAR_ZX-SH1.0-6PWT | J2 |
| 1 | FPC_0.5MM_4P_Vertical_mounting_type_H2.0mm | balancerDriver:FPC-SMD_4P-L7.5-W2.0-P0.50 | P1 |
| 1 | FerriteBead | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | FB2 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D12 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D8 |
| 1 | MPU6500 | balancerDriver:QFN24_3X3X0P9_IVS-L | U9 |
| 1 | R_Potentiometer | balancerDriver:RES-ADJ-TH_3362P | RV1 |
| 1 | STM32G431CBUx | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U5 |
| 1 | TPS5430DDA | Package_SO:TI_SO-PowerPAD-8_ThermalVias | U3 |
More from dwanpo/balancer
7- 4 layers89.8 × 41.5 mm

- 4 layers89.8 × 41.5 mm

- 4 layers89.8 × 41.5 mm

- 2 layers89.8 × 41.5 mm

- 2 layers89.8 × 41.5 mm

- 2 layers100 × 53.9 mm

- 2 layers32 × 14 mm

Similar boards
- 2 layers45 × 45 mm

- 6 layers240 × 207 mm

- 4 layers70 × 56 mm

- 4 layers60 × 80 mm

- 2 layers48.3 × 65.3 mm

- 2 layers46.7 × 87.5 mm

Servo motor
tomrodinger/servomotor
Open-source NEMA-17 integrated servomotor (motor + closed-loop driver + controller + encoder). RS-485, Python/Arduino libraries, MCP server for AI control. Hardware, firmware and software.
112 parts17MIT - 4 layers65 × 30 mm

- 4 layers56 × 43.3 mm

Questions
How big is the BldcDriver PCB?
It measures 89.8 × 41.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the BldcDriver use?
198 parts, built around the EG2133, TPS5430DDA, HC-FPC-0.5-6P-CSH20 and 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BldcDriver KiCad files?
From the dwanpo/balancer repository on GitHub, at the commit this page was made from: the board is hardware/motor/V1.3/bldcDriver.kicad_pcb and its schematic hardware/bak/bldcDriver/bldcDriver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BldcDriver design in my own project?
Its repository states no licence, so its author keeps all rights: ask dwanpo before reusing the design.