2 layers34 × 25.5 mm
Microcontroller boards
1,623 boards- 2 layers57.2 × 39.3 mm
- 2 layers40 × 60 mm
STM8003f3p development board
niksrajendra/stm8-bootloader-extended
STM8 bootloader designed to work with any available communication interface and configure for different feature like secure, unsecure bootloader.
131 parts - 2 layers82.1 × 48.1 mm
- 2 layers68.6 × 53.3 mm
ArduinoShield
nklloyd/flyprecise
The sensor outputs an analog voltage that varies with applied force. This voltage is converted into a digital value using analogRead() (range: 0–1023).
16 parts - 4 layers25.9 × 55.9 mm
- 2 layers44.9 × 54.7 mm
Devboard
NoIwantyourcode/Devboard
This is a custom devboard I have made which uses an RP2040 along with 40 GPIO pins, This also has an inbuild MPU-6500 IMU for all of your tilt and acceleration measuring needs!
42 parts - 2 layers39 × 60 mm
Devboard
norayr-noro/Split_keyboard-with-adjustable-knobs
I made this project using the base of the hackclub starter projects of the split keyboard but also im adding a knob on each side one for sound and one for screen brightness adjustment
46 parts - 4 layers51.5 × 36 mm
- 4 layers27 × 60 mm
- 2 layers24 × 42 mm
Basalt pcb
oc-ece-mesa/mesa-basalt
A cost-effective and easy to assemble STM32C071 based devboard
16 parts - 2 layers106 × 47 mm
Coyote pcb
oc-ece-mesa/mesa-coyote
A handheld gaming system that uses the MESA Basalt devboard
17 parts - 2 layers68.6 × 53.3 mm
- 4 layers60 × 60 mm
Stm32c071 project
ondrejjel/stm32c071_embedded_board
A custom STM32C071K8T6-based embedded development board designed for portable, low-level firmware development and experimentation. Features include external SPI flash and an ATECC secure element.
74 partsMIT - 2 layers22.4 × 53.7 mm
- 2 layers
Oomlout oomp electronic breakout board mcu atmega328 shennie
oomlout/oomlout_oomp_electronic_breakout_board_mcu_atmega328_shennie
A repository designed to recreate the design files for the ubiquotously available arduino nano clone from aliexpress.
34 parts - 2 layers40 × 25 mm
Oomlout oomp electronic project ibbc breakout board holder oobb 3 2
oomlout/oomlout_oomp_electronic_project_ibbc_breakout_board_holder_oobb_3_2
Search Links: (L) - lcsc, (D) - digikey, (M) - mouser, (N) - newark, (SZ) - szlcsc
11 parts - 4 layers80 × 105 mm
- 4 layers74 × 55 mm
Breakoutboard
openpoenode/breakoutboard
Development board exposing all module features
58 partsCERN-OHL-W-2.0 - 2 layers33 × 52 mm
LS018B7DH02-Breakout Board
Ortupas/LS018B7DH02-Breakout-Board
Breakout board for the Sharp Memory LCD – LS018B7DH02. This repository contains schematics and PCB layout built with KiCad, plus fabrication outputs (Gerbers) so you can order boards, assemble, and test quickly.
23 partsMIT - 4 layers30 × 30 mm
Devboard
Outdatedcandy92/TinySTM32
TinySTM32 is a small 30mmx30mm devboard that features a STM32F103T8U6. It has two programmable buttons and LEDs on board, and 18 pins broken out.
37 partsMIT - 2 layers88 × 55 mm
- 4 layers106.6 × 106.7 mm
Ghost feather v1
PanBabinicz/ghost-feather
Here: - -n myenv specifies the environment name - python=3.10 installs a specific Python version
97 parts - 2 layers58.6 × 53.8 mm
![Arduino Shield V1[1], the printed circuit board in 3D](/embed/boards/paradox3407/Keviathan-ROV-Custom-Arduino-Shield-PCB.jpg?size=s&soon)
Arduino Shield V1[1]
paradox3407/Keviathan-ROV-Custom-Arduino-Shield-PCB
I designed a custom PCB that simplifies the electrical system for a underwater ROV. The PCB is a "shield" or "hat" for and Arduino Uno, and it has connections for an accelerometer, pressure sensor, and 8 thruster ESCs.
11 parts