
Type e
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Arduino UNO breakout board for NANO style MCU boards
UNO is an open-source printed circuit board by ole00, from the ole00/bruno-nano repository on GitHub. It is a 2-layer board of 68.6 × 53.3 mm with 16 parts on 28 nets, routed with 257 tracks and 32 vias.
It belongs with the microcontroller boards boards of this library.
Arduino UNO breakout board for NANO style MCU boards

This PCB allows you to experiment with various Arduino UNO shields while using an Arduino NANO style board. The picture above uses a cheap LGT8F328P based NANO board.
NANO has - compared to UNO - two extra pins: A6 and A7. These are exposed to UNO pin header, next to IOREF pin.
Capacitor C1 is a bypass capacitor for 5V rail, use 10 to 47uF capacitor or leave the footprint unpopulated. Capacitor C2 is a bypass capacitor for 3.3V rail, use 10 to 47uF capacitor or leave the footprint unpopulated.
PCB version 1.1 (Rev 2) allows to select 5V or 3.3V IOREF voltage by using a jumper. Ensure your IOREF voltage selection matches the MCU VCC. That is, if the MCU operates on 3.3V then select 3.3V IOREF and if the MCU operates on 5V then select 5V IOREF. If unsure, then do not populate IOREF jumper at all. Chances are the shield will not need the IOREF pin. Note that IOREF jumper does not magically make your board 5V or 3.3V tolerant - IOREF pin is only used for IO voltage indication.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | , , , , , , | ||
| 1 | - | Arduino-connectors.IntLib:2X03 | SPI1 |
| 1 | - | Arduino-connectors.IntLib:1X18_ | DIGITAL |
| 1 | - | Arduino-connectors.IntLib:1X14_ | ANALOG |
| 1 | PinHeader_1x01_P2.54mm_Vertical | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | A6 |
| 1 | SW_PUSH_6mm_H5mm | Button_Switch_THT:SW_PUSH_6mm_H5mm | RESET |
The 12 most common of 16 parts.

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


It measures 68.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
16 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ole00/bruno-nano repository on GitHub, at the commit this page was made from: the board is design/UNO.kicad_pcb and its schematic design/UNO.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ole00 before reusing the design.