Interfaces and adapters

7,328 boards

4 layers58 × 36 mm
Raccoon tap
BenjiTrapp/TrashPandaPaws
Red Team hardware implant — RPi4/CM4 inline Ethernet tap with PoE, cover identities (Cisco Phone / HP Printer), 802.1X NAC bypass, a stdlib-only Python beacon over HTTPS/DNS/SMB/QUIC, and an operator GUI with an…
59 parts5
4 layers70 × 70 mm
Blue interface board
BetzDrive/interface-board
Power and signal conditioning board for the Betz Drive system
130 parts5
2 layers76.2 × 76.2 mm
ESP32 Robot Bd
BigJBehr/ESP32-Dual-H-Bridge-Breakout-Board
An ESP32 Breakpout Board with a dual H bridge
48 parts5
2 layers36.4 × 13.3 mm
Z88 RS232 Model T
bkw777/Z88_RS232
Convert a Cambridge Z88 serial port to a standard serial port
3 parts5GPL-3.0
2 layers27 × 20 mm
Nrf54l15 breakout
bluekitchen/waveshare-esp32-s3-touch-lcd-nrf54l15
Nordic nRF54L15 add-on for Waveshare ESP32-S3-Touch-LCD-1.85C Box with Speaker
3 parts5
2 layers63.5 × 45.7 mm
Fathom x
bluerobotics/fathom-x
Ethernet capable tether interface board for the Fathom tether.
25 parts5MIT
2 layers40 × 20 mm
B GP-02-Brk-01Mbr R01
Boardoza/Boardoza_GP-02_GNSS_Satellite_Navigation_Breakout_Board
A multi-mode GNSS receiver breakout board based on the GP-02 SoC supporting BDS, GPS, and GLONASS.
24 parts5CC-BY-SA-4.0
2 layers60 × 40 mm
B TPS630702-Brk-01Mbr R01
Boardoza/Boardoza_TPS630702_Buck-Boost_Converter_Breakout_Board
TPS630702 High-Efficiency Buck-Boost Converter for Adjustable Voltage Regulation Breakout Board.
35 parts5CC-BY-SA-4.0
2 layers202.3 × 150 mm
Nabu pizero adapter
brijohn/nabupc
My collection of nabu pc projects
40 parts5
4 layers45 × 70 mm
Syzygy breakout
butterstick-fpga/syzygy-breakout-standard
Basic SYZYGY pod breaking out to 0.1" proto area
296 parts5
2 layers50.8 × 68.6 mm
MCU Board
caipiblack/STM32-CAN-Bus-board
This is an STM32F042K6T6 based board that can be used to build sensors that communicate over a CAN bus
26 parts5GPL-3.0
4 layers27.9 × 20.3 mm
RF Attenuator Board
ckflight/RF_ATTENUATOR_HARDWARE
1 to 6000MHz 7-Bit Digital Step Attenuator Board with Parallel or Serial Interface
35 parts5MIT
2 layers29.5 × 22 mm
CE Makerverse MicroSD Card Adapter
CoreElectronics/CE-Makerverse-MicroSD-Card-Adapter
This is the repo for the Core Electronics Makerverse™ MicroSD Card Adapter.
31 parts5
2 layers100 × 100 mm
MidiBox3
Dethernal/Midibox3
New features for DIN5 MIDI → Waweblaster interface board. Now with MT-32 stuff.
127 parts5MIT
2 layers47 × 32 mm
Tl866-tsop mrom
devinacker/tl866-tsop-mrom
TL866 adapter boards for reading TSOP48 mask ROMs
4 parts5
2 layers75.3 × 33.8 mm
24-ch relay driver kicad
dilshan/24ch-usb-high-voltage-driver
24-Channel USB high voltage driver.
35 parts5MIT
2 layers20 × 16 mm
Hs probe adapter
Disasm/hs-probe-adapter
Adapter board for the HS Probe hardware probe.
5 parts5
2 layers76.2 × 40.6 mm
EspressifESP32toExpressAdaptor
dnhutchins/ETC_Express_Reverse_Eng
The ultimate goal of this work is to develop an interface to use the control surface from a legacy ETC Express 24/48 lighting controller as a modern EOSNomad compatible programming and fader wing.
3 parts5
2 layers27 × 8.8 mm
Cereal
dotcypress/cereal
Compact, CP2102N based, USB-C to UART bridge
17 parts5Apache-2.0
2 layers34.8 × 30.2 mm
Orangeclock adapter
dsbaars/orangeclock-s-mini-adapter
Source file for the adapter board, to make an OrangeClock out of a WeAct 2.9 inch display in combination with a S* mini.
3 parts5GPL-3.0
2 layers46.8 × 18 mm
Ps2 to amiga
dylangageot/pakia
PS/2 to Amiga Keyboard Interface Adapter
6 parts5GPL-3.0
2 layers57.3 × 61 mm
Tobo
eldstal/touchless-xm
Physical buttons for media control on the Sony WH-1000XM2, WH-1000XM3, WH-1000XM4 and possibly WH-1000XM5 wireless headphones
91 parts5
2 layers31.8 × 26.7 mm
LoRa
eugeniobaglieri/LoRa1276-breakout-board
KiCad schematics and pcb of a breakout board adapter for Nicerf Lora1276 V2.0 - module.
4 parts5MIT
4 layers57.9 × 41.3 mm
JTAGMux 1.0
eurecom-s3/JTAGMux
Simple JTAG Multiplexer, to allow controlling a device over JTAG from FPGA (2 PMOD connctors) or a standard JTAG debugger
15 parts5