
Amulet encoder
EPFLXplore/XRE_LeggedRobot_HW
PCB designs for Xplore Research's robot dog project

PCB designs for Xplore Research's robot dog project
Amulet controller is an open-source printed circuit board by EPFLXplore, from the EPFLXplore/XRE_LeggedRobot_HW repository on GitHub, published under the Apache-2.0 licence. It is a 6-layer board of 69.7 × 76.7 mm with 414 parts on 177 nets, routed with 1,534 tracks and 794 vias.
It is built around the AS5047P-ATSM, AS5048B-HTSP-500 and DRV8353FSRTAR, with the GRJ31CZ72A475KE01L, BAT41KFILM and RCS0402100RFKED among its other parts. Its parts include 138 capacitors, 60 resistors, 25 diodes, 9 transistors and 4 ICs. It belongs with the robots and motor control boards of this library.
ΛMULET is a high-power brushless motor controller, compatible with the moteus firmware. It was specifically designed to be integrated in EPFL Xplore's Legged Robot actuators.
| Parameter | ΛMULET V1.0 |
|---|---|
| Voltage Input | 12-44V |
| Peak Electrical Power | TBD |
| Mass | TBD |
| Peak Phase Current | 100A |
| Communication | 5Mbps CAN-FD |
| Cooling | 12V Fan |
| Positioning | 2x Onboard 14-bit Encoders |
| Control rate | 15-30kHz |
| PWM Switching Rate | 15-60kHz |
| MCU | STM32G474 |
| Dimensions | 69.7 x 76.7mm |
amulet_controller
├── Computations # Misc calculations
├── DXF_SVG # Vector graphics
├── Images # Pictures and screenshots
├── Logos # Xplore and Amulet logos
├── Manufacturing
│ |── Assembly # Position files, BOM, assembly document
| | └── ibom # HTML BOM
| └── Fabrication # Fabrication document and testpoints positions
| └── Gerbers # Gerbers
├── STEP_Blender # 3D STEP and pcb2blender file
├── Schematic # PDF of schematic
├── Templates # Title block templates
└── lib
|── 3d_models # Component 3D models
|── lib_fp # Footprint libraries
└── lib_sym # Symbol librariesAssociated firmware is forked from the moteus repository.
Schematic is hugely inspired by the moteus controllers designed by Josh Pieper. They were modified to meet our own specifications, and to follow what I personally consider good layout practices.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 50 | 4u7 X7R 100V | 0_capacitor_smd:C_1206_3216_DensityHigh | C19, C21, C31, C32, C33, C34, C35, C36, C39, C40, C41, C42, C43, C44, C46, C47 +34 |
| 26 | 100n X7R 50V | 0_capacitor_smd:C_0402_1005_DensityHigh | C10, C11, C101, C102, C103, C104, C105, C107, C108, C109, C111, C112, C113, C114, C115, C125 +10 |
| 15 | 3n3 X7R 100V | 0_capacitor_smd:C_0402_1005_DensityHigh | C116, C117, C118, C119, C120, C121, C122, C123, C124, C133, C134, C135, C136, C137, C138 |
| 15 | BAT41KFILM | 0_diode_smd:D_SOD-523 | D3, D4, D5, D6, D7, D8, D9, D10, D11, D14, D15, D19, D20, D21, D22 |
| 14 | 100R 1% 1/5W | 0_resistor_smd:R_0402_1005_DensityHigh | R22, R23, R25, R35, R36, R37, R38, R39, R40, R41, R42, R43, R48, R49 |
| 7 | 2k 1% | 0_resistor_smd:R_0402_1005_DensityHigh | R8, R9, R28, R44, R45, R46, R47 |
| 7 | 2u2 X7R 100V | 0_resistor_smd:R_0805_2012_DensityHigh | C15, C16, C17, C18, C20, C45, C52 |
| 6 | 100k 1% | 0_resistor_smd:R_0402_1005_DensityHigh | R5, R19, R20, R21, R24, R29 |
| 6 | 5R 1% 0.4W | 0_resistor_smd:R_0603_1608_DensityHigh | R55, R56, R57, R58, R59, R60 |
| 6 | 7R5 1% 1/2W | 0_resistor_smd:R_0805_2012_DensityHigh | R10, R11, R13, R14, R16, R17 |
| 6 | Fiducial | 0_fiducials:Fiducial_1mm_Mask2mm | FM1, FM2, FM3, FM4, FM5, FM6 |
| 6 | GND | 0_testpoint:TestPoint_Pad_D0.5mm_Front | TP52, TP53, TP54, TP55, TP56, TP57 |
| 6 | TPW1R306PL,L1Q | 0_transistor_fet:2-5S1A | Q1, Q2, Q3, Q4, Q5, Q6 |
| 5 | 1u X7R 10V | 0_capacitor_smd:C_0402_1005_DensityHigh | C2, C6, C9, C24, C26 |
| 4 | 1k @ 100MHz | 0_resistor_smd:R_0805_2012_DensityHigh | FB1, FB2, FB3, FB4 |
| 4 | 4u7 X7R 100V | 0_capacitor_smd:C_1206_3216_DensityHighest | C89, C96, C98, C100 |
| 4 | G*** | kibuzzard-657F78ED | kibuzzard-657F78ED, kibuzzard-657F78ED, kibuzzard-657F78ED, kibuzzard-657F78ED |
| 4 | G*** | kibuzzard-657F7953 | kibuzzard-657F7953, kibuzzard-657F7953, kibuzzard-657F7953, kibuzzard-657F7953 |
| 3 | +VBAT | 0_testpoint:TestPoint_Pad_D0.5mm_Front | TP39, TP40, TP41 |
| 3 | 0R | 0_resistor_smd:R_0603_1608_DensityHigh | R52, R53, R54 |
| 3 | 0R | 0_resistor_smd:R_0402_1005_DensityHigh | R4, R31, R32 |
| 3 | 0m5 1% 2W | 0_resistor_smd:HCS1206FTL500 | R12, R15, R18 |
| 3 | 100n X7R 100V | 0_capacitor_smd:C_1206_3216_DensityHighest | C95, C97, C99 |
| 3 | 10k 1% | 0_resistor_smd:R_0402_1005_DensityHigh | R7, R27, R33 |
| 3 | 1n X7R 1kV | 0_capacitor_smd:C_0603_1608_DensityHigh | C130, C131, C132 |
| 3 | 1n X7R 25V | 0_capacitor_smd:C_0402_1005_DensityHigh | C12, C13, C14 |
| 3 | 1u X7R 25V | 0_capacitor_smd:C_0603_1608_DensityHigh | C60, C88, C93 |
| 3 | 22R 1% | 0_resistor_smd:R_0402_1005_DensityHigh | R1, R2, R3 |
| 3 | 4u7 X7R 16V | 0_capacitor_smd:C_0603_1608_DensityHigh | C1, C84, C110 |
| 3 | M3 | 0_pad:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3 |
| 3 | PMV90ENER | 0_package_SOT_TO_SMD:SOT-23-3 | Q7, Q8, Q9 |
| 2 | +3V3 | 0_testpoint:TestPoint_Pad_D0.5mm_Front | TP48, TP49 |
| 2 | 100n X7R 100V | 0_capacitor_smd:C_0603_1608_DensityHigh | C22, C92 |
| 2 | 10u X7R 25V | 0_capacitor_smd:C_0805_2012_DensityHighest | C56, C106 |
| 2 | 15u X7R 25V | 0_capacitor_smd:C_1210_3225_DensityHigh | C30, C38 |
| 2 | 220n X7S 100V | 0_capacitor_smd:C_0603_1608_DensityHigh | C23, C25 |
| 2 | 22u | 0_inductor_smd:L_Coilcraft_LPS4018 | L1, L2 |
| 2 | 22u X7R 10V | 0_capacitor_smd:C_0805_2012_DensityHighest | C37, C83 |
| 2 | 60R4 1% 1/4W | 0_resistor_smd:R_0603_1608_DensityHigh | R50, R51 |
| 2 | CDSOT23-SM712 | 0_package_SOT_TO_SMD:SOT95P230X110-3N | D23, D27 |
| 2 | Nano-Fit 1x03 | 0_connectors:1054301203 | J12, J13 |
| 2 | PESD2CANFD24V-UX | 0_package_SOT_TO_SMD:SOT95P230X117-3N | D24, D25 |
| 2 | PESD4USB3U-TBSX | 0_package_DFN_QFN:SOT1176D | D18, D26 |
| 2 | PESD4USB5B-TBSX | 0_package_DFN_QFN:SOT1176D | D16, D17 |
| 2 | S2B-PH-SM4-TB | 0_connectors:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J8, J9 |
| 2 | SMBJ51CD-M3/H | 0_diode_smd:DIOM4336X24N | D1, D2 |
| 1 | +12V | 0_testpoint:TestPoint_Pad_D0.5mm_Front | TP45 |
| 1 | +3V3 | 0_testpoint:TestPoint_Pad_D0.5mm_Back | TP50 |
| 1 | +5V | 0_testpoint:TestPoint_Pad_D0.5mm_Back | TP47 |
| 1 | +5V | 0_testpoint:TestPoint_Pad_D0.5mm_Front | TP46 |
| 1 | +A3V3 | 0_testpoint:TestPoint_Pad_D0.5mm_Front | TP51 |
| 1 | 100n X7R 16V | 0_capacitor_smd:C_0402_1005_DensityHigh | C90 |
| 1 | 10R 1% | 0_resistor_smd:R_0603_1608_DensityHigh | R34 |
| 1 | 10n X7R 100V | 0_capacitor_smd:C_0402_1005_DensityHigh | C76 |
| 1 | 150R 1% 1/5W | 0_resistor_smd:R_0402_1005_DensityHigh | R26 |
| 1 | 1u X7R 6.3V | 0_capacitor_smd:C_0402_1005_DensityHigh | C94 |
| 1 | 2u2 | 0_inductor_smd:L_Coilcraft_LPS3314 | L3 |
| 1 | 47k 1% NTC | 0_resistor_smd:R_0402_1005_DensityHigh | TH1 |
| 1 | 47n X7R 100V | 0_capacitor_smd:C_0603_1608_DensityHigh | C91 |
| 1 | 4k7 1% | 0_resistor_smd:R_0402_1005_DensityHigh | R30 |
| 1 | 4n7 X7R 100V | 0_capacitor_smd:C_0402_1005_DensityHigh | C129 |
| 1 | 4u7 X5R 25V | 0_capacitor_smd:C_0402_1005_DensityHigh | C7 |
| 1 | 9k09 1% | 0_resistor_smd:R_0402_1005_DensityHigh | R6 |
| 1 | AS5047P | 0_package_SO:SOP-14_4.4x5mm_P0.65mm_H1.2mm | U7 |
| 1 | AS5048B | 0_package_SO:SOP-14_4.4x5mm_P0.65mm_H1.2mm | U8 |
| 1 | AUX1_A | 0_testpoint:TestPoint_Pad_D0.5mm_Front | TP17 |
| 1 | AUX1_B | 0_testpoint:TestPoint_Pad_D0.5mm_Front | TP18 |
| 1 | AUX1_C | 0_testpoint:TestPoint_Pad_D0.5mm_Front | TP19 |
| 1 | AUX1_D | 0_testpoint:TestPoint_Pad_D0.5mm_Front | TP20 |
| 1 | AUX1_E | 0_testpoint:TestPoint_Pad_D0.5mm_Front | TP21 |
| 1 | AUX1_I2C_PULLUP | 0_testpoint:TestPoint_Pad_D0.5mm_Front | TP22 |
| 1 | AUX2_A | 0_testpoint:TestPoint_Pad_D0.5mm_Front | TP24 |
| 1 | AUX2_B | 0_testpoint:TestPoint_Pad_D0.5mm_Front | TP25 |
| 1 | AUX2_C | 0_testpoint:TestPoint_Pad_D0.5mm_Front | TP26 |
| 1 | AUX2_D | 0_testpoint:TestPoint_Pad_D0.5mm_Front | TP27 |
| 1 | AUX2_I2C_PULLUP | 0_testpoint:TestPoint_Pad_D0.5mm_Front | TP28 |
| 1 | CAS-220TA | 0_switch_button:CAS-220A_NDC-L | SW1 |
| 1 | DGD0216WT-7 | 0_package_SOT_TO_SMD:SOT-23-5 | U11 |
| 1 | DRV8353FS | 0_package_DFN_QFN:WQFN-40-1EP_6x6mm_P0.5mm_EP4.15x4.15mm_ThermalVias | U6 |
| 1 | DRV_CS | 0_testpoint:TestPoint_Pad_D0.5mm_Back | TP7 |
The 294 most common of 414 parts.

EPFLXplore/XRE_LeggedRobot_HW
PCB designs for Xplore Research's robot dog project

aidanbrzezinski/Prism-test
ΛMULET is a high-power brushless motor controller, compatible with the moteus firmware. It was specifically designed to be integrated in EPFL Xplore's Legged Robot actuators.


nickraymond/nereus_Pi_shield_ADIN2111
A Raspberry Pi Zero 2W shield built from a copy of the Sofar Bristlemouth mote: ADIN2111 two-port 10BASE-T1L with PoDL, powered from the bus, 5 V for the Pi, a 24 V payload port, and the Sofar mote's power path…

EPFLXplore/Power_HW
KiCad design files for the power boards of the Xplore rover.


toby-lane-amodo/ARIA_SRB_FAFF_2_POC_CBs_1_FABLE_5_1
Electronics for FAFF 2 — a linear actuator with force feedback, built as an OEM-style module for soft-material characterisation. CBs1 is the proof-of-concept control board.


It measures 69.7 × 76.7 mm and has 6 copper layers, 1.66 mm thick.
414 parts, built around the AS5047P-ATSM, AS5048B-HTSP-500, DRV8353FSRTAR and GRJ31CZ72A475KE01L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the EPFLXplore/XRE_LeggedRobot_HW repository on GitHub, at the commit this page was made from: the board is amulet_controller/amulet_controller.kicad_pcb and its schematic amulet_controller/Block Diagram.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).