Skip to the content
12

KT-0805R

Hubei KENTO ElecExtended

-40℃~+85℃ 120° 2.4V 210mcd 40mW 615nm~630nm 645nm Discrete Diode Red Water Clear 0805 LED Indication - Discrete ROHS

Part id
kento/KT-0805R
Category
LED Indication, Discrete
Package
0805
Pins
2
In stock
82,711 at JLCPCB (C2295)
Used on
13 open-source boards

Overview

The KT-0805R is a LED Indication, Discrete made by Hubei KENTO Elec in a 0805 package with 2 pins. -40℃~+85℃ 120° 2.4V 210mcd 40mW 615nm~630nm 645nm Discrete Diode Red Water Clear 0805 LED Indication - Discrete ROHS.

PCBKit's library has its KiCad symbol (Device:LED, from KiCad's library) and its footprint (LED_SMD:LED_0805_2012Metric, from KiCad's library), ready for a KiCad board. 82,711 are in stock at JLCPCB (part C2295). 13 open-source boards in 12 repositories on GitHub use it.

Symbol

Device:LEDFrom KiCad's library

Footprint

12
LED_SMD:LED_0805_2012MetricFrom KiCad's library

Pinout

2
The pins of the KT-0805R
PinNameType
1KPassive
2APassive

Open-source boards using it

13See all 13
  • 2 layers140 × 105.5 mmRECUV02, the printed circuit board in 3D

    RECUV02

    TsunaHalo2001/RECUV

    Codigos de las estaciones meteorologicas del grupo GISMODEL

    77 parts2
  • 4 layers72.5 × 39.7 mmFOC RP2350, the printed circuit board in 3D

    FOC RP2350

    totaldesaster/SimpleFOC-Serial-Driver

    Advanced dual BLDC driver based on the RP2350 and DRV8323S ICs, designed to be controlled from a trajectory controller over RS-485, RS-422 or TTL UART. Features a compact high power design with two stacked PCBs.

    68 parts1GPL-3.0
  • 4 layers25.4 × 75 mmFiit esp32-kit pcb, the printed circuit board in 3D

    Fiit esp32-kit pcb

    999matej999/fiit-esp32-kit

    FIIT ESP32 Kit

    81 partsGPL-3.0
  • 4 layers80 × 70 mmStm32, the printed circuit board in 3D

    Stm32

    ackom-a-o/stm32f446-development-board

    Custom STM32F446ZET6 development board in KiCad. Prototype hardware, design review and validation log; hardware testing pending.

    69 parts
  • 2 layers76.2 × 50.8 mmAltusCharger, the printed circuit board in 3D

    AltusCharger

    bnparks001/AltusCharger

    Multi-Output charger for AltusMetrum batteries.

    71 parts
  • 2 layers68 × 42 mmDormRadar RX, the printed circuit board in 3D

    DormRadar RX

    gancaokuai/dorm-radar-pcb

    ESP32-C3 radar PCB with TX and RX boards, KiCad sources, Gerbers and manufacturing files

    27 parts
  • 4 layers50 × 32 mmUSB C PowerSupply, the printed circuit board in 3D

    USB C PowerSupply

    Kraad25/USB-C-Advanced-Power-Supply

    USB-C PD trigger board (CH224A) — KiCad schematic and PCB layout, selectable 5/9/12/20/28V output

    40 parts
  • 2 layers20 × 160 mmZibs Saber v2, the printed circuit board in 3D

    Zibs Saber v2

    PedroBMedeiros/PolySaber

    Firmware for Cal Poly Senior Project - PolySaber a Custom PCB Soundboard

    75 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the KT-0805R?

Yes. The symbol is Device:LED and the footprint LED_SMD:LED_0805_2012Metric, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the KT-0805R?

0805, with 2 pins. Its footprint is drawn on this page.

Where can I order the KT-0805R?

JLCPCB lists it as part C2295, with 82,711 in stock; the sellers' links on this page open their listings.

What can replace the KT-0805R?

Parts like it in the library: the KT-0805G by Hubei KENTO Elec, the NCD0805R1 by Foshan NationStar Optoelectronics, the XL-2012SURC by XINGLIGHT and the XL-2012UGC by XINGLIGHT. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the KT-0805R?

13 boards in 12 repositories on GitHub; the most starred are listed on this page, with their KiCad files.