

RECUV02
Codigos de las estaciones meteorologicas del grupo GISMODEL
- Size
- 140 × 105.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 77
- Nets
- 79
- Pads
- 336
- Tracks, vias
- 521, 42
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 11 Jul 2024
- Updated
- 30 Jul 2026
Overview
RECUV02 is an open-source printed circuit board by TsunaHalo2001, from the TsunaHalo2001/RECUV repository on GitHub. It is a 2-layer board of 140 × 105.5 mm with 77 parts on 79 nets, routed with 521 tracks and 42 vias.
It is built around the CH340C, ESP32-S3-WROOM-1-N16R8 and ACS712ELCTR-20A-T, with the A1117-3.3, KSR213GLFG and CL21B104KBCNNNC among its other parts. Its parts include 19 capacitors, 14 resistors, 6 ICs, 4 diodes and 3 connectors. It belongs with the ESP32 boards of this library.
Main components
12CH340C
SOP-16-20℃~+70℃ 2Mbps 3.3V、5V 50uA 7mA Transceiver USB 2.0 SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersESP32-S3-WROOM-1-N16R8
SMD,25.5x18mm-103.5dBm -40℃~+65℃ 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA ESP32-S3R8 On-board PCB Antenna UART、SPI、I2C、GPIO、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesACS712ELCTR-20A-T
SOIC-8-40℃~+85℃ 1.2mΩ 100mV/A 2.1kVrms 20A 3.5us 5V 80kHz Support SOIC-8 Current Sensors ROHSAllegro MicroSystems, LLCCurrent SensorsA1117-3.3
SOT-223-40℃~+125℃@(Ta) 1 1.2V@(1A) 15V 1A 3.3V 5mA 60dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSIDCHIPVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsKSR213GLFG
SMD-40℃~+125℃ 1.8N 100,000 cycles 10mA 2.5mm 3.9mm 32V 6mm Gull Wing IP50 Round Button SPST-NO Surface Mount,Vertical SMD Tactile Switches ROHSC&KTactile SwitchesCL21B104KBCNNNC
0805100nF 50V X7R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTCL21A106KOQNNNE
080510uF 16V X5R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTR-RJ11R04P-A800
插件0℃~+70℃ 1 12.2mm 13mm 14.55mm Gold Harpoon Contact (Plastic) Non-LED Non-PoE Phosphor Bronze RJ11 Jack Right Angle Unshielded Plugin Ethernet Connectors / Modular Connectors (RJ45 RJ11) ROHSCkmtwEthernet Connectors / Modular Connectors (RJ45 RJ11)MMBT2222ALT1
SOT-23-55℃~+150℃ 1 NPN 100 10nA 300MHz 300mV 300mW 40V 600mA 6V NPN SOT-23 Bipolar (BJT) ROHSLGEBipolar (BJT)CL21C102JBCNNNC
08051nF 50V C0G ±5% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTCL21B105KAFNFNE
08051uF 25V X7R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTA2541WV-3P
插件,P=2.54mm-40℃~+105℃ 1 1x3P 2.54mm 2.54mm 250V 3A 3P 3mm 6mm Black Brass Gold Pin Header Through Hole 插件,P=2.54mm Pin Headers ROHSCJTPin Headers
Parts
77| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100n | EasyEDA:C0805 | C2, C3, C4, C7, C8, C9, C11, C13, C15, C16, C17, C18, C19 |
| 5 | 10k | EasyEDA:R0805 | R8, R9, R10, R11, R13 |
| 4 | 10u | EasyEDA:C0805 | C1, C5, C6, C10 |
| 4 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | 01, 02, 03, 04 |
| 3 | 470 | EasyEDA:R0805 | R5, R6, R7 |
| 3 | PLUVIOMETER | EasyEDA:RJ11-TH_PCB-6P4C-90 | PLUVIOMETER_1, PLUVIOMETER_2, PLUVIOMETER_3 |
| 2 | 1k | EasyEDA:R0805 | R3, R4 |
| 2 | 5.1k | EasyEDA:R0805 | R1, R2 |
| 2 | EXTENDER | EasyEDA:RJ11-TH_PCB-6P4C-90 | BUS_I2C_1_3, BUS_I2C_2_2 |
| 2 | MMBT2222ALT1 | EasyEDA:SOT-23-3_L3.0-W1.7-P0.95-LS2.9-BR | Q1, Q2 |
| 2 | NET_WEIGHT | EasyEDA:RJ11-TH_PCB-6P4C-90 | HX711_1, HX711_2 |
| 2 | TSL2591 | EasyEDA:RJ11-TH_PCB-6P4C-90 | BUS_I2C_1_1, BUS_I2C_2_1 |
| 1 | 100k | EasyEDA:R0805 | R12 |
| 1 | 1n | EasyEDA:C0805 | C14 |
| 1 | 1u | EasyEDA:C0805 | C12 |
| 1 | 2.2k | EasyEDA:R0603 | R14 |
| 1 | 3V3_ROW | EasyEDA:HDR-TH_3P-P2.54-V-M | H7 |
| 1 | 5V_ROW | EasyEDA:HDR-TH_3P-P2.54-V-M | H6 |
| 1 | A1117-3.3 | EasyEDA:SOT-223-3_L6.5-W3.4-P2.30-LS7.0-BR-1 | U3 |
| 1 | ACS712ELCTR-20A-T | EasyEDA:SOIC-8_L4.9-W3.9-P1.27-LS6.0-BL | U6 |
| 1 | AIR_HUMIDITY/AIR_TEMPERATURE | EasyEDA:RJ11-TH_PCB-6P4C-90 | DHT22_1 |
| 1 | BOOT | EasyEDA:SW-SMD_KSR213GLFG | U5 |
| 1 | Blue | EasyEDA:LED0805-R-RD | LED2 |
| 1 | CH340C | EasyEDA:SOP-16_L10.0-W3.9-P1.27-LS6.0-BL | U2 |
| 1 | COMMUNICATION | EasyEDA:RJ11-TH_PCB-6P4C-90 | UART_1 |
| 1 | CURRENT | EasyEDA:CONN-TH_2P-P5.00_CPC3703CTR | P3 |
| 1 | ESP32-S3-WROOM-1 | EasyEDA:WIRELM-SMD_ESP32-S3-WROOM-1 | U1 |
| 1 | GND_ROW | EasyEDA:HDR-TH_3P-P2.54-V-M | H8 |
| 1 | Green | EasyEDA:LED0805-R-RD | LED1 |
| 1 | HUMIDITY_SOIL | EasyEDA:RJ11-TH_PCB-6P4C-90 | FC28_1 |
| 1 | LEFT_ROW_1 | EasyEDA:HDR-TH_3P-P2.54-V-M | H5 |
| 1 | LEFT_ROW_2 | EasyEDA:HDR-TH_6P-P2.54-V-M-1 | H1 |
| 1 | LOW_ROW | EasyEDA:HDR-TH_10P-P2.54-V-M-1 | H2 |
| 1 | PRES_ATMOS | EasyEDA:RJ11-TH_PCB-6P4C-90 | BUS_I2C_1_2 |
| 1 | RESET | EasyEDA:SW-SMD_KSR213GLFG | U4 |
| 1 | RIGHT_ROW_1 | EasyEDA:HDR-TH_6P-P2.54-V-M-1 | H3 |
| 1 | RIGHT_ROW_2 | EasyEDA:HDR-TH_6P-P2.54-V-M-1 | H4 |
| 1 | Red | EasyEDA:LED0805-R-RD | LED3 |
| 1 | SOLAR_RADIATION | EasyEDA:RJ11-TH_PCB-6P4C-90 | DAVIS6450_1 |
| 1 | SS54_C22452 | EasyEDA:SMA_L4.4-W2.8-LS5.4-R-RD | D1 |
| 1 | TEMP_SOIL | EasyEDA:RJ11-TH_PCB-6P4C-90 | DS18B20_1 |
| 1 | USB-306 | EasyEDA:USB-TYPE-C-TH_USB-306-1 | USB1 |
| 1 | VEXT | EasyEDA:CONN-TH_2P-P5.00_CPC3703CTR | P1 |
| 1 | VOLTAGE | EasyEDA:CONN-TH_2P-P5.00_CPC3703CTR | P2 |
| 1 | WIND | EasyEDA:RJ11-TH_PCB-6P4C-90 | W_SPEED_1/W_DIR_1 |
More from TsunaHalo2001/RECUV
1- 2 layers105 × 102 mm

Similar boards
- 2 layers77.5 × 100 mm

Rover pdb
devkyber/PCB
AI-assisted PCB engineering for native KiCad: source evidence, scoped changes, checked previews, human review, and reproducible release packages.
93 parts - 4 layers25.4 × 75 mm

- 2 layers120 × 120 mm

Modular Relay Board V2.1
victovats/Modular_Relay_Board_PCB_TMR
Modular relay board designed for Toronto Metropolitan Robotics featuring 4 relay circuits that isolate high-voltage inputs from low-voltage control signals to prevent interference.
78 parts - 4 layers60 × 80 mm

Wisp
huulanka/wisp
Open-source ESP32 room climate monitor — CO2, VOC, humidity, temperature and light sensing with custom PCB, MQTT/HomeKit integration, and OTA firmware updates. Full hardware + software, from schematic to BOM.
91 partsMIT - 4 layers250 × 145 mm

Thermo40
mahmoud-elghamry/thermocouple
This directory is a self-contained KiCad 10 project. It does not share files with, and must not be confused with, the single-channel board in hardware/single-channel/.
731 parts1 - 2 layers112 × 158 mm

Hello
HeyPCB/hello-8051
HELLO: a tiny 8051 computer shaped like a 1984 desktop. AT89S52, 32 KB SRAM, 128x64 ST7920 LCD, USB-C. 112 x 158 mm 2-layer KiCad 10 board, DRC clean, firmware that writes hello. Built through HeyPCB's MCP server.
27 partsMIT - 4 layers50 × 90 mm

Tuner pedal
kulovac/tuner-pedal
Source for my tuner pedal project from algorithm design to PCB implementation
108 parts - 2 layers298 × 80 mm

Questions
How big is the RECUV02 PCB?
It measures 140 × 105.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RECUV02 use?
77 parts, built around the CH340C, ESP32-S3-WROOM-1-N16R8, ACS712ELCTR-20A-T and A1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RECUV02 KiCad files?
From the TsunaHalo2001/RECUV repository on GitHub, at the commit this page was made from: the board is RECUV PCB/REV 0.1/RECUV02/RECUV02.kicad_pcb and its schematic RECUV PCB/REV 0.1/RECUV01/RECUV01.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RECUV02 design in my own project?
Its repository states no licence, so its author keeps all rights: ask TsunaHalo2001 before reusing the design.