2 layers76.2 × 65.3 mm
Open-source KiCad boards
31 match “shack”Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.
- 2 layers41.3 × 60.3 mm
- 2 layers80 × 50 mm
Digirig shack
softcomplex/Digirig-Mobile
Integrated digital modes interface for amateur radio
63 parts133GPL-3.0 - 2 layers30.7 × 34.9 mm
Knoepfchen
shack/knoepfchen
A small PCB with debounced buttons and switch to put on breadboards
16 parts2MIT - 2 layers36.1 × 21.3 mm
- 2 layers68.6 × 45.1 mm
- 2 layers68.6 × 45.1 mm
- 2 layers68.6 × 16.5 mm
- 2 layers36.3 × 21.6 mm
- 2 layers68.6 × 45.1 mm
- 2 layers68.6 × 16.5 mm
- 2 layers36.1 × 25.7 mm
- 2 layers68.6 × 16.5 mm
- 2 layers36.1 × 25.5 mm
TANDY 200 Dual RAM tsop
bkw777/TANDY_200_RAM
Option RAM modules for TANDY 200 portable computer
5 parts3 - 2 layers57.2 × 19.1 mm
- 4 layers159.6 × 161 mm
Shack interface
PE1RGU/hf-antenna-switch
Remote HF antenna switch: 3 radios x 4 antennas (path to 8), outdoor relay unit with a hardware safety chain, controlled over Cat6 from a shack interface. KiCad 10, open hardware, designed together with an AI.
290 parts2CERN-OHL-S-2.0 - 2 layers69.9 × 52.3 mm
MCX128 25
Danjovic/MCX128_25
New PCB for MCX-128 memory expansion for Radio Shack’s MC-10 microcomputer
14 parts2CERN-OHL-S-2.0 - 2 layers35.6 × 20.3 mm
Model T RAM
bkw777/Model_T_RAM
8K RAM module for "Model T Computers" - TRS-80 Model 100, Kyotronic KC-85, NEC PC-8201, Olivetti M10
5 parts19 - 2 layers76.2 × 76.2 mm
Saintcon2020Front
compukidmike/Saintcon2021
This year's badge was created by compukidmike, ProfessorPlum, and SodiumHydrogen. It's styled after a combination lock and the shackle actually opens!
7 parts3 - 2 layers58 × 60 mm
- 2 layers76.2 × 76.2 mm
Saintcon2020
compukidmike/Saintcon2021
This year's badge was created by compukidmike, ProfessorPlum, and SodiumHydrogen. It's styled after a combination lock and the shackle actually opens!
77 parts3 - 2 layers94 × 61 mm
SaintconMinibadgeHolder8
compukidmike/Saintcon2021
This year's badge was created by compukidmike, ProfessorPlum, and SodiumHydrogen. It's styled after a combination lock and the shackle actually opens!
16 parts3 - 4 layers97.6 × 96 mm
Centipede-32e
strickyak/copico-centipede
A Radio Shack / Tandy Color Computer ("Coco") wildcard peripheral cartridge, with an RP2350 processor and 46 usable GPIO lines, covering most of the Coco's expansion port bus.
135 parts7MIT - 4 layers60 × 107 mm
Rf iso backplane
PE1RGU/hf-antenna-switch
Remote HF antenna switch: 3 radios x 4 antennas (path to 8), outdoor relay unit with a hardware safety chain, controlled over Cat6 from a shack interface. KiCad 10, open hardware, designed together with an AI.
4 parts2CERN-OHL-S-2.0