4 layers60 × 45 mm
Open-source KiCad boards
20 match “pull-up-dev”Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.
- 2 layers65 × 30 mm
Golden rp2040 usb hid
mrcha033/hw-codesign
Agentic hardware co-design: brief to KiCad, firmware, 3D review, and explicit fabrication blockers.
35 parts2Apache-2.0 - 2 layers115 × 75 mm
SpinCoater
RParkerE/OpenSilicon
OpenSilicon enables DIY semiconductor fabrication with open-source guides for building IC equipment at home. The project includes BOMs, 3D files, firmware, and PDKs, supporting makers and researchers in chip fabrication.
11 parts55GPL-3.0 - 6 layers304.8 × 243.8 mm
- 4 layers100 × 100 mm
FarmMesh Node
chinawrj/FarmMesh-Node
Developing an integrated hardware and software solution for farm-wide Mesh networking: RP2350B/ESP32-C5 nodes, firmware, network protocols, and Wi-Fi/BLE sensor access.
164 parts - 4 layers118 × 94 mm
Lamp rev b controller
laminarforge/laminarforge-cad
Parametric CAD models (Rust + vcad) for LaminarForge open-source LAMP diagnostics device
153 parts - 2 layers115.5 × 62 mm
Robosen master block
Nantaphat-Yoktaworn/robosen_block
The schematic is organized on an A3 sheet into 4 functional zones on a strict 1.27 mm (50 mil) grid:
21 partsApache-2.0 - 4 layers71 × 99 mm
Single
Panda-Intelligence/panda-standard-board
The current product is the Panda Standard 4.7-inch parallel E0470A01-family single-board engineering design, with a replaceable 2050mAh LCO battery pack (323576) and a finished-device maximum thickness of 7mm, including…
253 parts - 2 layers142.9 × 113.5 mm
Keyball61 right
idank/keyboards
This repo contains pcb and 3d files for keyboards. The keyboards are adaptations of popular open source keyboards with a variety of changes.
138 parts10CC-BY-SA-4.0 - 4 layers71 × 129 mm
Core
Panda-Intelligence/panda-standard-board
The current product is the Panda Standard 4.7-inch parallel E0470A01-family single-board engineering design, with a replaceable 2050mAh LCO battery pack (323576) and a finished-device maximum thickness of 7mm, including…
208 parts - 4 layers96 × 68 mm
PANDA STD CORE EVT quilter j501-merged
Panda-Intelligence/panda-standard-board
The current product is the Panda Standard 4.7-inch parallel E0470A01-family single-board engineering design, with a replaceable 2050mAh LCO battery pack (323576) and a finished-device maximum thickness of 7mm, including…
176 parts - 4 layers96 × 68 mm
PANDA STD CORE EVT quilter j501-merged
Panda-Intelligence/panda-standard-board
The current product is the Panda Standard 4.7-inch parallel E0470A01-family single-board engineering design, with a replaceable 2050mAh LCO battery pack (323576) and a finished-device maximum thickness of 7mm, including…
155 parts - 8 layers
AutoMate
reubenvanka/automate
AutoMate smart-room controller product repository for firmware, hardware, and release evidence.
42 parts - 12 layers160.1 × 233.5 mm
Vme wren
KiCad/kicad-source-mirror
This is an active mirror of the KiCad development branch, which is hosted at GitLab (updated every time something is pushed). Pull requests on GitHub are not accepted or watched.
1,508 parts3.1kGPL-3.0 - 10 layers64 × 132 mm
E1-phone mainboard routed
KartikaySr/MindineersOS
Agent First Enterprise Grade Deploying System
89 partsMIT - 6 layers59.5 × 62.7 mm
CM5 MINIMA 3
KiCad/kicad-source-mirror
This is an active mirror of the KiCad development branch, which is hosted at GitLab (updated every time something is pushed). Pull requests on GitHub are not accepted or watched.
112 parts3.1kGPL-3.0 - 8 layers58.4 × 22.9 mm
RoyalBlue54L Feather
KiCad/kicad-source-mirror
This is an active mirror of the KiCad development branch, which is hosted at GitLab (updated every time something is pushed). Pull requests on GitHub are not accepted or watched.
71 parts3.1kGPL-3.0 - 4 layers104.5 × 81 mm
Tinytapeout demo
KiCad/kicad-source-mirror
This is an active mirror of the KiCad development branch, which is hosted at GitLab (updated every time something is pushed). Pull requests on GitHub are not accepted or watched.
309 parts3.1kGPL-3.0 - 2 layers99.5 × 99.5 mm
ESP32 master
kwiecinski/BMS-and-offgrid-photovoltaic-management-system
Project contains BMS for lead-acid batteries and ESP-based board used to pull information from EASUN offgrid inverter, energy meters and sensors.
155 parts3MIT - 2 layers99.5 × 99.5 mm
ESP32 master
kwiecinski/BMS-and-offgrid-photovoltaic-management-system
Project contains BMS for lead-acid batteries and ESP-based board used to pull information from EASUN offgrid inverter, energy meters and sensors.
147 parts3MIT