Skip to the content

Open-source KiCad boards

111 match “kev-m”

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 2 layersDFC77 ESP01, the printed circuit board in 3D

    DFC77 ESP01

    kev-m/DFC77

    A personal project to generate a local DCF77-compatible signal for nearby radio-controlled clocks.

    19 parts
  • 4 layers156.5 × 85.4 mmP2 Kevinbot Board, the printed circuit board in 3D

    P2 Kevinbot Board

    meowmeowahr/KevinbotV3-KiCAD

    Kevinbot Core - Parallax Propeller 2 Robot Controller

    166 parts7CERN-OHL-S-2.0
  • 2 layers155.2 × 170.3 mmMultimedia LED PCB, the printed circuit board in 3D

    Multimedia LED PCB

    Kevin-CE21/ESP32-S3-Multimedia-LED-PCB

    A 2-layer, heart-shaped carrier PCB that combines an ESP32-S3, 28 PWM-dimmed LEDs, a TFT display with microSD, and I2S audio on one USB-C-powered board. Designed from scratch in KiCad, from schematic through layout.

    45 parts1
  • 4 layers20 × 32.8 mmMicroAtlas, the printed circuit board in 3D

    MicroAtlas

    Kev1n8088/MicroAtlas

    38 parts
  • 2 layers20 × 38 mmMVPGPSTracker, the printed circuit board in 3D

    MVPGPSTracker

    Kev1n8088/MVPGPSTracker

    Juno GPS Tracker Repo (Previously named Minimum Viable Product Tracker)

    16 parts
  • 2 layers75 × 75 mmMacropad PCB, the printed circuit board in 3D

    Macropad PCB

    KevinAR-18/KeyBloom-Macropad

    KeyBloom is a Windows desktop companion app for a custom ESP32-C3 macro pad, featuring profile-based shortcut mapping, app launching, serial auto- detection, tray background runtime, included ESP32 firmware, and…

    17 parts
  • 2 layers49 × 38 mmMailboxSensorProcessor, the printed circuit board in 3D

    MailboxSensorProcessor

    kevinkessler/MailSensors-PCB

    PCB for the MailSensor Lora project

    24 parts
  • 4 layers65 × 56.5 mmMeshHat, the printed circuit board in 3D

    MeshHat

    kevinlutzer/MeshHat

    Meshtastic or Meshcore supported Raspberry Pi Hat

    38 partsMIT
  • 4 layers35.5 × 74.5 mmRoom environment monitor, the printed circuit board in 3D

    Room environment monitor

    kevinlutzer/room-environment-monitor

    An IOT device built of the raspberry pi

    57 parts
  • 2 layers80 × 100 mmKevinYan FinalMicromouse, the printed circuit board in 3D

    KevinYan FinalMicromouse

    kevinyan0620/Micromouse_Gen1_ClubProject

    An award-winning, STM32F205-based autonomous Micromouse featuring a custom 2-layer PCB, 9-DOF IMU motion tracking, and C-based flood-fill navigation algorithms.

    109 parts
  • 2 layers229 × 108 mmKevBoy, the printed circuit board in 3D

    KevBoy

    madman37287/KevBoy

    A Python/KiCAD project showcasing the development of a handheld retro gaming console from the ground up. This includes all the schematic and prototyping work.

    55 parts
  • 2 layers88 × 84.5 mmKevin PCB, the printed circuit board in 3D

    Kevin PCB

    MrCosmic413/GillGPT

    Kevin is an AI-powered animatronic fish built by modifying a Big Mouth Billy Bass. GillGPT brings together conversational AI, speech recognition, synthesized speech, a Raspberry Pi, FPGA motor control, and a custom…

    17 parts
  • 4 layers100 × 272 mmMic array circuit, the printed circuit board in 3D

    Mic array circuit

    kevmck451/phase_array_fossn

    develop a wide area coverage acoustic sensor with a 180 degree FOV and resolution sufficient to localize a target direction when combined with other sensing modalities

    13 parts2
  • 2 layers45.2 × 26.7 mmMG touchpad, the printed circuit board in 3D

    MG touchpad

    limblab/proc-kevin

    Kevin's analysis code

    10 parts2
  • 4 layers30 × 48.3 mmMosaicCarrier, the printed circuit board in 3D

    MosaicCarrier

    Kev1n8088/OshTelemega

    The Mega3080 FCU is an evolved clone of the Altus Metrum Telemega. Using the same firmware (meaning the same sensor suite), the primary developments are: - USB-C - Wago style spring terminals - Better GPS RF routing…

    22 parts
  • 2 layers12.7 × 5.1 mmMIC5504-3.3YMT, the printed circuit board in 3D

    MIC5504-3.3YMT

    kevinlutzer/breakout-boards

    Collection of breakout boards I designed for CNC milling

    3 parts
  • 2 layers229 × 142 mmKevboyOriginal, the printed circuit board in 3D

    KevboyOriginal

    madman37287/KevBoy

    A Python/KiCAD project showcasing the development of a handheld retro gaming console from the ground up. This includes all the schematic and prototyping work.

    37 parts